lm80 settings

[mds@paradyne.com (Mark D. Studebaker )]

You probably don't really have a LM80. See FAQ.

Edwin van Opstal wrote:
> Hi all,
> 
> I have installed the lm_sensors package for temperature monitoring of my
> ABIT KG7 mainboard, but when I ran "sensors" I got bogus output (see
> attached text). I looked into the /etc/sensors.conf file which suggested I
> contact you for LM80 settings.
> How can I find these out myself or do you happen to have the necessary
> settings from another user?
> 
> Thanks for your time.
> 
> Best regards,
> Edwin
> 
> 
> 
> ------------------------------------------------------------------------
> 
> lm80-i2c-0-2d
> Adapter: SMBus Via Pro adapter at 5000
> Algorithm: Non-I2C SMBus adapter
> +5V:       +4.03 V  (min =  +4.50 V, max =  +3.00 V)   ALARM
> VTT:       +1.85 V  (min =  +1.71 V, max =  +2.09 V)   ALARM
> +3.3V:     +2.55 V  (min =  +2.97 V, max =  +3.63 V)   ALARM
> +Vcore:    +3.26 V  (min =  +2.52 V, max =  +3.08 V)   ALARM
> +12V:     +13.64 V  (min = +10.80 V, max = +13.20 V)   ALARM
> -12V:      -7.09 V  (min =  -8.68 V, max =  -6.60 V)   
> -5V:       -2.70 V  (min =  -3.44 V, max =  -2.22 V)   ALARM
> fan1:     10546 RPM  (min = 6000 RPM, div = 1)          
> fan2:     5465 RPM  (min = 6000 RPM, div = 1)          
> temp:     -128.00 ?C (hot:limit =  +6?C,  hysteresis =  +5?C) ALARM
>          (os: limit =  +6?C,  hysteresis =  +5?C) ALARM
> alarms:   Board temperature input (LM75)               ALARM
> 
> eeprom-i2c-0-52
> Adapter: SMBus Via Pro adapter at 5000
> Algorithm: Non-I2C SMBus adapter
> Memory type:            DDR SDRAM DIMM SPD
> SDRAM Size (MB):        256
> 
> eeprom-i2c-0-53
> Adapter: SMBus Via Pro adapter at 5000
> Algorithm: Non-I2C SMBus adapter
> Memory type:            DDR SDRAM DIMM SPD
> SDRAM Size (MB):        256