All of lore.kernel.org
 help / color / mirror / Atom feed
* PROBLEM: ext3 / USB Mass Storage
@ 2003-07-18 10:22 Marco Lazzarotto
  2003-07-18 10:24 ` PROBLEM: ext3 / USB Mass Storage (the syslog file) Marco Lazzarotto
  0 siblings, 1 reply; 2+ messages in thread
From: Marco Lazzarotto @ 2003-07-18 10:22 UTC (permalink / raw)
  To: linux-kernel

[1.] Kernel bug erasing a file in an ext3 fs on a usb pen

[2.]
  0) Disk partitioned with one primary partition, taking all space.
disk size is 64Mb
[cfdisk 2.11n
Copyright (C) 1994-2000 Kevin E. Martin & aeb]
  1) I created a filesystem : mkfs.ext3 /dev/sda1
[mke2fs 1.27 (8-Mar-2002)]
  2) I copied a 27 MB long file twice on the pen (two versions of the 
same file, with the same name), and got a series of "ext3_new_block: 
Allocating block in system zone" errors (see log)
  3) I tried to delete the same file, and got a "Kernel bug" message 
(see log)

[3.] Keywords: ext3, usb mass storage, TwinMOS Mobile disk

[4.] Kernel version (from /proc/version):
	Linux version 2.4.20 (root@marco) (gcc version 2.95.4 20011002 (Debian 
prerelease)) #2 Wed May 14 15:12:07 CEST 2003

[5.] Output of Oops.. message:
	none

[7.] Environment
	Debian stable (woody)

[7.1.] Software
	Gnu C                  2.95.4
	Gnu make               3.79.1
	util-linux             2.11n
	mount                  2.11n
	modutils               2.4.15
	e2fsprogs              1.27
	fsck.jfs: not found
	reiserfsck: not found
	pcmcia-cs              3.1.33
	PPP                    2.4.1
	isdnctrl: not found
	Linux C Library        2.2.5
	Dynamic linker (ldd)   2.2.5
	Procps                 2.0.7
	Net-tools              1.60
	Console-tools          0.2.3
	Sh-utils               2.0.11
	Modules Loaded         vmnet vmmon [vmware stuff]


[7.2.] Processor information (from /proc/cpuinfo):
	processor       : 0
	vendor_id       : GenuineIntel
	cpu family      : 6
	model           : 11
	model name      : Intel(R) Pentium(R) III CPU 1133MHz
	stepping        : 1
	cpu MHz         : 1135.943
	cache size      : 256 KB
	fdiv_bug        : no
	hlt_bug         : no
	f00f_bug        : no
	coma_bug        : no
	fpu             : yes
	fpu_exception   : yes
	cpuid level     : 2
	wp              : yes
	flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca 
cmov pat pse36 mmx fxsr sse
	bogomips        : 2267.54

[7.3.] Module information (from /proc/modules):
	vmnet                  21152   1
	vmmon                  19636   0 (unused)

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)

/proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
4000-40ff : PCI CardBus #03
4400-44ff : PCI CardBus #03
4800-48ff : PCI CardBus #07
4c00-4cff : PCI CardBus #07
a400-a41f : Intel Corp. 82801BA/BAM USB (Hub #1)
   a400-a41f : usb-uhci
a800-a80f : Intel Corp. 82801BA IDE U100
   a800-a807 : ide0
   a808-a80f : ide1
b000-b0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
   b000-b0ff : 8139too
b400-b4ff : ESS Technology ESS Modem
b800-b8ff : ESS Technology ES1988 Allegro-1
   b800-b8ff : maestro3
d000-dfff : PCI Bus #01
   d800-d8ff : ATI Technologies Inc Radeon Mobility M6 LY

/proc/iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0ffebfff : System RAM
   00100000-002b26c6 : Kernel code
   002b26c7-00357a23 : Kernel data
0ffec000-0ffeefff : ACPI Tables
0ffef000-0fffefff : reserved
0ffff000-0fffffff : ACPI Non-volatile Storage
10000000-10000fff : Ricoh Co Ltd RL5c476 II
10001000-10001fff : Ricoh Co Ltd RL5c476 II (#2)
10400000-107fffff : PCI CardBus #03
10800000-10bfffff : PCI CardBus #03
10c00000-10ffffff : PCI CardBus #07
11000000-113fffff : PCI CardBus #07
ee800000-ee8000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
   ee800000-ee8000ff : 8139too
ef000000-efefffff : PCI Bus #01
   ef000000-ef00ffff : ATI Technologies Inc Radeon Mobility M6 LY
     ef000000-ef00ffff : radeonfb
eff00000-f7ffffff : PCI Bus #01
   f0000000-f7ffffff : ATI Technologies Inc Radeon Mobility M6 LY
     f0000000-f7ffffff : radeonfb
f8000000-fbffffff : Intel Corp. 82815 815 Chipset Host Bridge and Memory 
Controller Hub
fffc0000-ffffffff : reserved

[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and 
Memory Controller Hub (rev 04)
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
         Latency: 0
         Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
         Capabilities: [88] #09 [e104]
         Capabilities: [a0] AGP version 2.0
                 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
                 Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1

00:01.0 PCI bridge: Intel Corp.: Unknown device 1131 (rev 04) (prog-if 
00 [Normal decode])        Control: I/O+ Mem+ BusMaster+ SpecCycle- 
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
         I/O behind bridge: 0000d000-0000dfff
         Memory behind bridge: ef000000-efefffff
         Prefetchable memory behind bridge: eff00000-f7ffffff
         BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 
05) (prog-if 00 [Normal decode])
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
         I/O behind bridge: 0000b000-0000bfff
         Memory behind bridge: ee800000-eeffffff
         Prefetchable memory behind bridge: eff00000-efefffff
         BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corp. 82820 820 (Camino 2) Chipset ISA Bridge 
(ICH2) (rev 05)
         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0

00:1f.1 IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100 
(rev 05) (prog-if 80 [Master])
         Subsystem: Asustek Computer, Inc.: Unknown device 1567
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Region 4: I/O ports at a800 [size=16]

00:1f.2 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB 
(Hub A) (rev 05) (prog-if 00 [UHCI])
         Subsystem: Asustek Computer, Inc.: Unknown device 1567
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin D routed to IRQ 9
         Region 4: I/O ports at a400 [size=32]

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility 
M6 LY (prog-if 00
[VGA])
         Subsystem: Asustek Computer, Inc.: Unknown device 1491
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping+ SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64 (2000ns min), cache line size 08
         Interrupt: pin A routed to IRQ 11
         Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
         Region 1: I/O ports at d800 [size=256]
         Region 2: Memory at ef000000 (32-bit, non-prefetchable) [size=64K]
         Expansion ROM at effe0000 [disabled] [size=128K]
         Capabilities: [58] AGP version 2.0
                 Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2
                 Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
         Capabilities: [50] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)                Status: D0 PME-Enable- 
DSel=0 DScale=0 PME-

02:01.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 
(rev 12)
         Subsystem: Asustek Computer, Inc.: Unknown device 1049
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 32 (500ns min, 6000ns max)
         Interrupt: pin A routed to IRQ 5
         Region 0: I/O ports at b800 [size=256]
         Capabilities: [c0] Power Management version 2
                 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1+,D2+,D3hot+,D3cold-)                Status: D0 PME-Enable- 
DSel=0 DScale=0 PME-

02:01.1 Communication controller: ESS Technology ESS Modem (rev 12)
         Subsystem: Asustek Computer, Inc.: Unknown device 1049
         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Interrupt: pin A routed to IRQ 5
         Region 0: I/O ports at b400 [size=256]
         Capabilities: [c0] Power Management version 2
                 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=100mA 
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 
(rev 10)
         Subsystem: Asustek Computer, Inc.: Unknown device 1045
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 32 (8000ns min, 16000ns max)
         Interrupt: pin A routed to IRQ 9
         Region 0: I/O ports at b000 [size=256]
         Region 1: Memory at ee800000 (32-bit, non-prefetchable) [size=256]
         Capabilities: [50] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:05.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
         Subsystem: Asustek Computer, Inc.: Unknown device 1564
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 168
         Interrupt: pin A routed to IRQ 11
         Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
         Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
         Memory window 0: 10400000-107ff000 (prefetchable)
         Memory window 1: 10800000-10bff000
         I/O window 0: 00004000-000040ff
         I/O window 1: 00004400-000044ff
         BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ 
PostWrite+
         16-bit legacy interface ports at 0001

02:05.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
         Subsystem: Asustek Computer, Inc.: Unknown device 1564
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 168
         Interrupt: pin B routed to IRQ 10
         Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
         Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
         Memory window 0: 10c00000-10fff000 (prefetchable)
         Memory window 1: 11000000-113ff000
         I/O window 0: 00004800-000048ff
         I/O window 1: 00004c00-00004cff
         BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ 
PostWrite+
         16-bit legacy interface ports at 0001

[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
   Vendor: TwinMOS  Model: MOBILE Disk      Rev: 1.11
   Type:   Direct-Access                    ANSI SCSI revision: 02


[X.] Other notes, patches, fixes, workarounds:
	I didn't find the MAINTAINERS file ...


^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-07-18 10:12 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-07-18 10:22 PROBLEM: ext3 / USB Mass Storage Marco Lazzarotto
2003-07-18 10:24 ` PROBLEM: ext3 / USB Mass Storage (the syslog file) Marco Lazzarotto

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.