* support for PrPMC600 / MPC8240
@ 2003-09-08 13:05 Hubert Figuiere
2003-09-08 17:39 ` Mark A. Greer
0 siblings, 1 reply; 2+ messages in thread
From: Hubert Figuiere @ 2003-09-08 13:05 UTC (permalink / raw)
To: linuxppc-embedded
Hi,
I was wondering if there was any support for the Motorola PrPMC600 CPU
board, based on a MPC8240.
I find a few PrPMC board like 750 and 800 in the make config but not
this one. I also looked in the archive and found no clue. Any help ? I
would just like to avoid duplicating porting work.
Thanks.
Hub
--
"<erno> hm. I've lost a machine.. literally _lost_. it responds to ping,
it works completely, I just can't figure out where in my apartment it
is." -- http://www.bash.org/?5273
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: support for PrPMC600 / MPC8240
2003-09-08 13:05 support for PrPMC600 / MPC8240 Hubert Figuiere
@ 2003-09-08 17:39 ` Mark A. Greer
0 siblings, 0 replies; 2+ messages in thread
From: Mark A. Greer @ 2003-09-08 17:39 UTC (permalink / raw)
To: Hubert Figuiere; +Cc: linuxppc-embedded
Hubert Figuiere wrote:
>Hi,
>
>I was wondering if there was any support for the Motorola PrPMC600 CPU
>board, based on a MPC8240.
>
No support for the PrPMC600 that I am aware of.
Mark
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-09-08 17:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-09-08 13:05 support for PrPMC600 / MPC8240 Hubert Figuiere
2003-09-08 17:39 ` Mark A. Greer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.