reply to ticket 1407 (bmcsensors) for mds

reply to ticket 1407 (bmcsensors) for mds

[Sardella, Norman]

 >On the scaling, please email us the bmcsensors output in
 >dmesg when the module is inserted.
 >reference your ticket number.
 >thanks
 >mds 10/5/03

Sep 30 12:20:42 heliosc30 kernel: i2c-ipmi.o version 2.8.0 (20030714)
Sep 30 12:20:42 heliosc30 kernel: i2c-ipmi.o: BMC access for i2c modules 
initialized.
Sep 30 12:20:42 heliosc30 kernel: i2c-dev.o: i2c /dev entries driver 
module version 2.8.0 (20030714)
Sep 30 12:20:42 heliosc30 kernel: lm75.o version 2.8.0 (20030714)
Sep 30 12:20:42 heliosc30 kernel: ipmi_kcs: Acquiring BMC @ port=0xca2
Sep 30 12:20:42 heliosc30 kernel: bmcsensors.o version 2.8.0 (20030714)
Sep 30 12:20:42 heliosc30 kernel: bmcsensors.o: Registered client, 
scanning for sensors...

Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: registering sensor 0: 
(type 0x02) (fmt=0; m˜; b=0; k1=2; k2\x12; cap=0x69; mask=0x1b1b
)
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensors.conf: label in1 
"Baseboard 1.25V"
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 0: using upper 
critical threshold for upper limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 0: using 
positive-going hysteresis for lower limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: registering sensor 1: 
(type 0x02) (fmt=0; m\x196; b=0; k1=2; k2\x12; cap=0x69; mask=0x1b1
b)
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensors.conf: label in2 
"Baseboard 2.5V"
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 1: using upper 
critical threshold for upper limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 1: using 
positive-going hysteresis for lower limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: registering sensor 2: 
(type 0x02) (fmt=0; m\x172; b=0; k1=2; k2\x12; cap=0x69; mask=0x1b1
b)
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensors.conf: label in3 
"Baseboard 3.3V"
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 2: using upper 
critical threshold for upper limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 2: using 
positive-going hysteresis for lower limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: registering sensor 3: 
(type 0x02) (fmt=0; m\x151; b=0; k1=2; k2\x12; cap=0x69; mask=0x1b1
b)
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensors.conf: label in4 
"Baseboard 3.3VSB"
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 3: using upper 
critical threshold for upper limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 3: using 
positive-going hysteresis for lower limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: registering sensor 4: 
(type 0x02) (fmt=0; m&; b=0; k1=2; k2\x13; cap=0x69; mask=0x1b1b
)
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensors.conf: label in5 
"Baseboard 5.0V"
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 4: using upper 
critical threshold for upper limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 4: using 
positive-going hysteresis for lower limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: registering sensor 5: 
(type 0x02) (fmt=0; mb; b=0; k1=2; k2\x13; cap=0x69; mask=0x1b1b
)
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensors.conf: label in6 
"Baseboard 12V"
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 5: using upper 
critical threshold for upper limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 5: using 
positive-going hysteresis for lower limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: registering sensor 6: 
(type 0x02) (fmt=0; mr; b=-160; k1=2; k2\x13; cap=0x69; mask=0x1
b1b)
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensors.conf: label in7 
"Baseboard -12V"
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 6: using upper 
critical threshold for upper limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 6: using 
positive-going hysteresis for lower limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: registering sensor 7: 
(type 0x02) (fmt=0; m\x156; b=0; k1=2; k2\x12; cap=0x69; mask=0x1b1
b)
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensors.conf: label in8 
"Baseboard VBAT"
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 7: using upper 
critical threshold for upper limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 7: using 
positive-going hysteresis for lower limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: registering sensor 8: 
(type 0x02) (fmt=0; m\x118; b=0; k1=2; k2\x12; cap=0x69; mask=0x1b1
b)
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensors.conf: label in9 
"Processor VRM"
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 8: using upper 
critical threshold for upper limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 8: using 
positive-going hysteresis for lower limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: registering sensor 9: 
(type 0x01) (fmt=0; m=1; b=0; k1=0; k2=0; cap=0x68; mask=0x1b1b)
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensors.conf: label 
temp1 "Baseboard Temp"
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 9: using upper 
critical threshold for upper limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: sensor 9: using 
positive-going hysteresis for lower limit
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: 0 reservations cancelled
Sep 30 12:21:04 heliosc30 kernel: bmcsensors.o: registered 1 temp, 9 
volt, 0 current, 0 fan sensors




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20031006/958a18c8/attachment.html