it87 enhancements

it87 enhancements

[Mark Studebaker]

I was thinking of adding pwm support to it87.
Also exporting sensor type to /proc a la w83781d so that you don't need
the temp_type= setting at modprobe time.
Anybody working on this already?
Anybody have a board to test on if I come up with something?

it87 enhancements

[Mark Studebaker]

will do. thanks, I'd forgotten about that thread and patch.


Jean Delvare wrote:
> 
> > I was thinking of adding pwm support to it87.
> > Also exporting sensor type to /proc a la w83781d so that you don't
> > need the temp_type= setting at modprobe time.
> > Anybody working on this already?
> 
> Not exactly that, but we have a patch pending for the it87. See the
> whole (long) thread here:
> http://archives.andrew.net.au/lm-sensors/msg04549.html
> The patch was never applied. Could you take care of that before adding
> your own changes?
> 
> > Anybody have a board to test on if I come up with something?
> No, I don't.
> 
> --
> Jean Delvare
> http://www.ensicaen.ismra.fr/~delvare/

it87 enhancements

[Philip Pokorny]

I might have a test board.  ASUS 845GVE?

It's got an IT87xx I/O chip on it.  I haven't tried poking it with the 
latest lm_sensors code yet.  I'll let you know what 2.8.0 or 2.8.1 does 
on it.

:v)

Mark Studebaker wrote:
> will do. thanks, I'd forgotten about that thread and patch.
> 
> 
> Jean Delvare wrote:
> 
>>>I was thinking of adding pwm support to it87.
>>>Also exporting sensor type to /proc a la w83781d so that you don't
>>>need the temp_type= setting at modprobe time.
>>>Anybody working on this already?
>>
>>Not exactly that, but we have a patch pending for the it87. See the
>>whole (long) thread here:
>>http://archives.andrew.net.au/lm-sensors/msg04549.html
>>The patch was never applied. Could you take care of that before adding
>>your own changes?
>>
>>
>>>Anybody have a board to test on if I come up with something?
>>
>>No, I don't.
>>
>>--
>>Jean Delvare
>>http://www.ensicaen.ismra.fr/~delvare/
> 
> 



-- 
Philip Pokorny, Director of Engineering
Tel: 415-358-2635   Fax: 415-358-2646   Toll Free: 888-PENGUIN
PENGUIN COMPUTING, INC.
www.penguincomputing.com

it87 enhancements

[Jean Delvare]

> I was thinking of adding pwm support to it87.
> Also exporting sensor type to /proc a la w83781d so that you don't
> need the temp_type= setting at modprobe time.
> Anybody working on this already?

Not exactly that, but we have a patch pending for the it87. See the
whole (long) thread here:
http://archives.andrew.net.au/lm-sensors/msg04549.html
The patch was never applied. Could you take care of that before adding
your own changes?

> Anybody have a board to test on if I come up with something?
No, I don't.

-- 
Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/