Re: Different nand interface

[Alice Hennessy <ahennessy@mvista.com>]

Alice Hennessy wrote:

> David Woodhouse wrote:
>
> > On Mon, 2003-10-27 at 13:17 -0800, Alice Hennessy wrote:
> > > Thanks for the quick response.  I'll weigh the massage effort with any
> > > future maintenance effort saved.
> >
> > Bear in mind I'm happy enough to make changes to the generic NAND
> > interface if they're going to be useful in general.
> >
> > --
> > dwmw2
> >
> > ______________________________________________________
> > Linux MTD discussion mailing list
> > http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
> I've attached the current driver for review, possibly as a standalone
> driver.  As you can
> see from the patch,   the current placement of the driver is in the
> drivers/mtd/nand
> directory and it replaces the generic nand.c if configured to the
> customized board.
> This was to make use of nand_ecc.c and nand_ids.c.    Also, the supporting
> files
> stw_flash.h and stw_flash.c  are currently under the board's directories
> but can be massaged to
> go anywhere necessary.     This board's nand flash, as I've stated in
> previous emails,
> has a completely different hardware interface than the standard nand flash
> and this makes
> using the generic nand.c difficult.   Any opinions on how this fits in
> would be appreciated.
>
> Alice
>
>   ------------------------------------------------------------------------

Hi,

Are there any objections or opinions on adding this driver ?

Alice