[U-Boot-Users] Re: Ethernet on PPC Ebony not working ... solved!

[U-Boot-Users] Re: Ethernet on PPC Ebony not working ... solved!

[Srikanth Sherman]

>  I guess you are using 10MB ethernet. In the 440 is between EMAC and
> PHY  inserted so called ZMII bridge, which can operate in several modes. >
If   is in the RMII mode then is necessary to set correct speed in the ZMII
>  Speed Select Register.

Thanks Pavel.  This was the problem!  Your patch fixed it and now my
Ethernet works great.  Thanks again.

[U-Boot-Users] Re: Ethernet on PPC Ebony not working ... solved!

[Pavel Bartusek]

Hi,

As seems my patch solved the problem, please, Wolfgang can you check it 
  in to the CVS ?

regards

Pavel

-- 

Pavel Bartusek <pba@sysgo.com>
Software Engineering

SYSGO Real-Time Solutions AG | Embedded and Real-Time Software
Lise-Meitner-Str.15
89081 Ulm, Germany

Voice: +49-731-9533-1295
FAX:   +49-731-94683-10
www.sysgo.com | www.elinos.com | www.osek.de

[U-Boot-Users] Re: Ethernet on PPC Ebony not working ... solved!

[Wolfgang Denk]

In message <3FC20048.8010900@sysgo.com> you wrote:
> 
> As seems my patch solved the problem, please, Wolfgang can you check it 
>   in to the CVS ?

Sure. It's in my queue...

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
The so-called "desktop metaphor" of today's workstations  is  instead
an  "airplane-seat"  metaphor.  Anyone who has shuffled a lap full of
papers while seated between two portly passengers will recognize  the
difference -- one can see only a very few things at once.
                                                   - Fred Brooks, Jr.