* kernel 2.6.0 compilation help
@ 2003-12-23 7:12 Muhammad Talha
2003-12-23 15:56 ` Stef van der Made
0 siblings, 1 reply; 2+ messages in thread
From: Muhammad Talha @ 2003-12-23 7:12 UTC (permalink / raw)
To: linux-kernel
Dear all
i have Red Hat 9 i am trying to install kernel 2.6.0 . kernel seems to
compiled ok but does not boot
give following error at boot all drive are detected before boot.
module-init-tools 0.9.9 installed
ext3 filesystem support was build in the kernel
aslo /dev file system support buildin
my root parttion is /dev/sda1 ( ext3)
my .config
http://mail.magic.net.pk/kernel/.config
Error Message ##
VFS: Cannot open root device "sda1" or unknown-block(0,0)
Please append a correct "root="boot option
Kernel Panic : VFS Uanble to mount root fs on unknown-block(0,0)
i have following Hardware
Intel Entry level Server motherboard
Pentitum III 1266 MHz processor
2 GB RAM
3 SCSI hard drive
no ide drive
i have tried many time with different option but with no luck
Thanks waiting for your reply
Talha
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: kernel 2.6.0 compilation help
2003-12-23 7:12 kernel 2.6.0 compilation help Muhammad Talha
@ 2003-12-23 15:56 ` Stef van der Made
0 siblings, 0 replies; 2+ messages in thread
From: Stef van der Made @ 2003-12-23 15:56 UTC (permalink / raw)
To: Muhammad Talha; +Cc: linux-kernel
Dear Muhammad,
I think that you need to set this option
CONFIG_BLK_DEV_SD=m to Y and your problem should be solved. The kernel now doesn't know scsi disks (in menuconfig SCSI disk support)
Best regards,
Stef
Muhammad Talha wrote:
>Dear all
>
>i have Red Hat 9 i am trying to install kernel 2.6.0 . kernel seems to
>compiled ok but does not boot
>give following error at boot all drive are detected before boot.
>
>module-init-tools 0.9.9 installed
>ext3 filesystem support was build in the kernel
>aslo /dev file system support buildin
>my root parttion is /dev/sda1 ( ext3)
>my .config
>
>http://mail.magic.net.pk/kernel/.config
>
>
>Error Message ##
>
>VFS: Cannot open root device "sda1" or unknown-block(0,0)
>Please append a correct "root="boot option
>Kernel Panic : VFS Uanble to mount root fs on unknown-block(0,0)
>
>i have following Hardware
>
>Intel Entry level Server motherboard
>Pentitum III 1266 MHz processor
>2 GB RAM
>3 SCSI hard drive
>no ide drive
>
>i have tried many time with different option but with no luck
>
>Thanks waiting for your reply
>
>Talha
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-12-23 15:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-12-23 7:12 kernel 2.6.0 compilation help Muhammad Talha
2003-12-23 15:56 ` Stef van der Made
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.