[LARTC] traffic in default class

[LARTC] traffic in default class

[Denis Kot]

how to see which packets is going in to default class?

-- 
Denis Kot
denis?jabber.org.by
ICQ: 13680126
Mobil: +375 29 6-1234-78
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] traffic in default class

[Denis Kot]

as I wrote before (in another message to list):

tc qdisc add dev imq0 root handle 1: htb default 30
tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit
tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbit

then:

iptables -t mangle -A PREROUTING  -i ppp0 -s 192.168.2.2 -j IMQ --todev 0
tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit
tc filter add dev imq0 protocol ip parent 1:0 prio 1 u32 match ip src
192.168.2.2 flowid 1:22

so how to see which packets is going in to default class?

On Mon, 31 Jan 2005 14:49:07 +0100, Jesper Lund <jesper@ballbreaker.dk> wrote:
> > how to see which packets is going in to default class?
> 
> Depends on how you filter packets, tc ? iptables ?  MARK ? CLASSIFY ?
> 
> /Jesper
> 


-- 
Denis Kot
denis?jabber.org.by
ICQ: 13680126
Mobil: +375 29 6-1234-78
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/