* [ALSA - driver 0000687]: Cannot build gentoo-ebuild for 1.0.7
@ 2004-11-28 18:06 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2004-11-28 18:06 UTC (permalink / raw)
To: alsa-devel
The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=687>
======================================================================
Reported By: m_wright
Assigned To: perex
======================================================================
Project: ALSA - driver
Issue ID: 687
Category: 0_compilation problem_!!!
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution: Gentoo Linux
Kernel Version: 2.6.9-ck2
======================================================================
Date Submitted: 11-28-2004 19:06 CET
Last Modified: 11-28-2004 19:06 CET
======================================================================
Summary: Cannot build gentoo-ebuild for 1.0.7
Description:
The gentoo ebuild for 1.0.7-r1 (basically 1.0.7) fails on linux kernel
2.6.9-ck2 with the following errors:
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:
In function `snd_compat_vmalloc_to_page':
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:41:
warning: implicit declaration of function `VMALLOC_VMADDR'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: implicit declaration of function `pte_offset'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: assignment makes pointer from integer without a cast
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
11-28-04 19:06 m_wright New Issue
11-28-04 19:06 m_wright Distribution => Gentoo Linux
11-28-04 19:06 m_wright Kernel Version => 2.6.9-ck2
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0000687]: Cannot build gentoo-ebuild for 1.0.7
@ 2004-11-29 14:27 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2004-11-29 14:27 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=687>
======================================================================
Reported By: m_wright
Assigned To: perex
======================================================================
Project: ALSA - driver
Issue ID: 687
Category: 0_compilation problem_!!!
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution: Gentoo Linux
Kernel Version: 2.6.9-ck2
======================================================================
Date Submitted: 11-28-2004 19:06 CET
Last Modified: 11-29-2004 15:27 CET
======================================================================
Summary: Cannot build gentoo-ebuild for 1.0.7
Description:
The gentoo ebuild for 1.0.7-r1 (basically 1.0.7) fails on linux kernel
2.6.9-ck2 with the following errors:
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:
In function `snd_compat_vmalloc_to_page':
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:41:
warning: implicit declaration of function `VMALLOC_VMADDR'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: implicit declaration of function `pte_offset'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: assignment makes pointer from integer without a cast
======================================================================
----------------------------------------------------------------------
tiwai - 11-29-04 15:27
----------------------------------------------------------------------
Are these detected by configure properly? config.log?
Issue History
Date Modified Username Field Change
======================================================================
11-28-04 19:06 m_wright New Issue
11-28-04 19:06 m_wright Distribution => Gentoo Linux
11-28-04 19:06 m_wright Kernel Version => 2.6.9-ck2
11-29-04 15:27 tiwai Note Added: 0002638
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0000687]: Cannot build gentoo-ebuild for 1.0.7
@ 2004-11-29 15:41 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2004-11-29 15:41 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=687>
======================================================================
Reported By: m_wright
Assigned To: perex
======================================================================
Project: ALSA - driver
Issue ID: 687
Category: 0_compilation problem_!!!
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution: Gentoo Linux
Kernel Version: 2.6.9-ck2
======================================================================
Date Submitted: 11-28-2004 19:06 CET
Last Modified: 11-29-2004 16:41 CET
======================================================================
Summary: Cannot build gentoo-ebuild for 1.0.7
Description:
The gentoo ebuild for 1.0.7-r1 (basically 1.0.7) fails on linux kernel
2.6.9-ck2 with the following errors:
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:
In function `snd_compat_vmalloc_to_page':
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:41:
warning: implicit declaration of function `VMALLOC_VMADDR'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: implicit declaration of function `pte_offset'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: assignment makes pointer from integer without a cast
======================================================================
----------------------------------------------------------------------
tiwai - 11-29-04 15:27
----------------------------------------------------------------------
Are these detected by configure properly? config.log?
----------------------------------------------------------------------
m_wright - 11-29-04 16:41
----------------------------------------------------------------------
This is the output of configure from the ebuild, any help??
Matt
./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man
--inf odir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc
--localstatedir=/var /lib --with-oss --with-kernel=/usr/src/linux
--with-build= --with-isapnp=yes --w ith-sequencer=yes
--with-cards=emu10k1
configure: WARNING: If you wanted to set the --build type, don't use
--host.
If a cross compiler is detected then cross compile mode will be used.
checking for i686-pc-linux-gnu-gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for i686-pc-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking for a BSD-compatible install... /bin/install -c
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking whether time.h and sys/time.h may both be included... yes
checking whether gcc needs -traditional... no
checking for current directory...
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7
checking cross compile...
checking for directory with kernel source... /usr/src/linux
checking for directory with kernel build...
checking for kernel version... 2.6.9-ck2
checking for GCC version... Kernel compiler: gcc 3.3.3 20040412 (Gentoo
Linux 3.3.3-r6, ssp-3.3.2-2, pi e-8.7.6) Used compiler: gcc (GCC) 3.3.3
20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)
checking for built-in ALSA... "no"
checking for existing ALSA module... "no"
checking for Red Hat kernel... "auto"
checking for Red Hat kernel... "no"
checking for SUSE kernel... "auto"
checking for SUSE kernel... "no"
checking to modify of kernel linux/kmod.h... "no"
checking for kernel linux/compiler.h... "yes"
checking for kernel linux/pm.h... "yes"
checking for kernel linux/spinlock.h... "yes"
checking for kernel linux/irq.h... "yes"
checking for kernel linux/threads.h... "yes"
checking for kernel linux/rwsem.h... "yes"
checking for kernel linux/gameport.h... "yes"
checking for kernel linux/devfs_fs_kernel.h... "yes"
checking for kernel linux/highmem.h... "yes"
checking for kernel linux/workqueue.h... "yes"
Removing a dummy linux/workqueue.h.
checking for kernel linux/dma-mapping.h... "yes"
Removing a dummy linux/dma-mapping.h.
checking for kernel asm/hw_irq.h... "yes"
checking for kernel linux/device.h... "yes"
Removing a dummy linux/device.h.
checking for kernel linux/jiffies.h... "yes"
Removing a dummy linux/jiffies.h.
checking for kernel linux/compat.h... "yes"
Removing a dummy linux/compat.h.
checking for kernel linux/adb.h... "yes"
checking for kernel linux/cuda.h... "yes"
checking for kernel linux/pmu.h... "yes"
checking for kernel linux/moduleparam.h... "yes"
Removing a dummy linux/moduleparam.h.
checking for kernel linux/syscalls.h... "yes"
Removing a dummy linux/syscalls.h.
checking for kernel module symbol versions... "no"
checking for PCI support in kernel... "yes"
checking for I2C driver in kernel... module
checking for input subsystem in kernel... yes
checking for SGI/MIPS (HAL2) architecture... "no"
checking for directory to store kernel modules...
/lib/modules/2.6.9-ck2/kernel/sound
checking for verbose printk... on
checking for debug level... none
checking for ISA support in kernel... "yes"
checking for SMP... "yes"
checking for Video device support in kernel... "no"
checking for ISA PnP driver in kernel... yes
checking for PnP driver in kernel... yes
checking for Kernel ISA-PnP support... "no"
checking for Kernel ISA-PnP module support... "no"
checking for strlcpy... "yes"
checking for snprintf... "yes"
checking for scnprintf... "yes"
checking for sscanf... "yes"
checking for vmalloc_to_page... "no"
checking for old kmod... "no"
checking for PDE... "no"
checking for pci_set_consistent_dma_mask... "no"
checking for tty->count is the atomic type... "no"
checking for remap_pfn_range... "no"
checking for new remap_page_range... "no"
checking for kcalloc... "no"
checking for saved_config_space in pci_dev... "no"
checking for acpi_register_gsi... "no"
Removing local linux/pnp.h.
checking for driver version... 1.0.7
checking for sequencer support... yes
checking for OSS/Free emulation... yes
checking for RTC callback support in kernel... "yes"
checking for Procfs support... "yes"
checking for USB support... "yes"
checking for kernel PCMCIA
checking for PCMCIA support... "no"
checking for PCMCIA module support... "no"
checking for PC9800 support in kernel... "no"
checking for parallel port support... "no"
checking for parallel port module support... "no"
checking for processor type... i686
checking for i386 machine type... default
checking for which soundcards to compile driver for... emu10k1
configure: creating ./config.status
config.status: creating version
config.status: creating Makefile.conf
config.status: creating snddevices
config.status: creating utils/alsa-driver.spec
config.status: creating utils/buildrpm
config.status: creating toplevel.config
config.status: creating utils/alsasound
config.status: creating utils/alsasound.posix
config.status: creating include/config.h
config.status: creating include/config1.h
config.status: creating include/version.h
config.status: include/version.h is unchanged
config.status: creating include/autoconf-extra.h
Issue History
Date Modified Username Field Change
======================================================================
11-28-04 19:06 m_wright New Issue
11-28-04 19:06 m_wright Distribution => Gentoo Linux
11-28-04 19:06 m_wright Kernel Version => 2.6.9-ck2
11-29-04 15:27 tiwai Note Added: 0002638
11-29-04 16:41 m_wright Note Added: 0002653
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
^ permalink raw reply [flat|nested] 11+ messages in thread* [ALSA - driver 0000687]: Cannot build gentoo-ebuild for 1.0.7
@ 2004-11-29 16:20 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2004-11-29 16:20 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=687>
======================================================================
Reported By: m_wright
Assigned To: perex
======================================================================
Project: ALSA - driver
Issue ID: 687
Category: 0_compilation problem_!!!
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution: Gentoo Linux
Kernel Version: 2.6.9-ck2
======================================================================
Date Submitted: 11-28-2004 19:06 CET
Last Modified: 11-29-2004 17:20 CET
======================================================================
Summary: Cannot build gentoo-ebuild for 1.0.7
Description:
The gentoo ebuild for 1.0.7-r1 (basically 1.0.7) fails on linux kernel
2.6.9-ck2 with the following errors:
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:
In function `snd_compat_vmalloc_to_page':
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:41:
warning: implicit declaration of function `VMALLOC_VMADDR'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: implicit declaration of function `pte_offset'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: assignment makes pointer from integer without a cast
======================================================================
----------------------------------------------------------------------
m_wright - 11-29-04 16:41
----------------------------------------------------------------------
This is the output of configure from the ebuild, any help??
Matt
./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man
--inf odir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc
--localstatedir=/var /lib --with-oss --with-kernel=/usr/src/linux
--with-build= --with-isapnp=yes --w ith-sequencer=yes
--with-cards=emu10k1
configure: WARNING: If you wanted to set the --build type, don't use
--host.
If a cross compiler is detected then cross compile mode will be used.
checking for i686-pc-linux-gnu-gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for i686-pc-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking for a BSD-compatible install... /bin/install -c
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking whether time.h and sys/time.h may both be included... yes
checking whether gcc needs -traditional... no
checking for current directory...
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7
checking cross compile...
checking for directory with kernel source... /usr/src/linux
checking for directory with kernel build...
checking for kernel version... 2.6.9-ck2
checking for GCC version... Kernel compiler: gcc 3.3.3 20040412 (Gentoo
Linux 3.3.3-r6, ssp-3.3.2-2, pi e-8.7.6) Used compiler: gcc (GCC) 3.3.3
20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)
checking for built-in ALSA... "no"
checking for existing ALSA module... "no"
checking for Red Hat kernel... "auto"
checking for Red Hat kernel... "no"
checking for SUSE kernel... "auto"
checking for SUSE kernel... "no"
checking to modify of kernel linux/kmod.h... "no"
checking for kernel linux/compiler.h... "yes"
checking for kernel linux/pm.h... "yes"
checking for kernel linux/spinlock.h... "yes"
checking for kernel linux/irq.h... "yes"
checking for kernel linux/threads.h... "yes"
checking for kernel linux/rwsem.h... "yes"
checking for kernel linux/gameport.h... "yes"
checking for kernel linux/devfs_fs_kernel.h... "yes"
checking for kernel linux/highmem.h... "yes"
checking for kernel linux/workqueue.h... "yes"
Removing a dummy linux/workqueue.h.
checking for kernel linux/dma-mapping.h... "yes"
Removing a dummy linux/dma-mapping.h.
checking for kernel asm/hw_irq.h... "yes"
checking for kernel linux/device.h... "yes"
Removing a dummy linux/device.h.
checking for kernel linux/jiffies.h... "yes"
Removing a dummy linux/jiffies.h.
checking for kernel linux/compat.h... "yes"
Removing a dummy linux/compat.h.
checking for kernel linux/adb.h... "yes"
checking for kernel linux/cuda.h... "yes"
checking for kernel linux/pmu.h... "yes"
checking for kernel linux/moduleparam.h... "yes"
Removing a dummy linux/moduleparam.h.
checking for kernel linux/syscalls.h... "yes"
Removing a dummy linux/syscalls.h.
checking for kernel module symbol versions... "no"
checking for PCI support in kernel... "yes"
checking for I2C driver in kernel... module
checking for input subsystem in kernel... yes
checking for SGI/MIPS (HAL2) architecture... "no"
checking for directory to store kernel modules...
/lib/modules/2.6.9-ck2/kernel/sound
checking for verbose printk... on
checking for debug level... none
checking for ISA support in kernel... "yes"
checking for SMP... "yes"
checking for Video device support in kernel... "no"
checking for ISA PnP driver in kernel... yes
checking for PnP driver in kernel... yes
checking for Kernel ISA-PnP support... "no"
checking for Kernel ISA-PnP module support... "no"
checking for strlcpy... "yes"
checking for snprintf... "yes"
checking for scnprintf... "yes"
checking for sscanf... "yes"
checking for vmalloc_to_page... "no"
checking for old kmod... "no"
checking for PDE... "no"
checking for pci_set_consistent_dma_mask... "no"
checking for tty->count is the atomic type... "no"
checking for remap_pfn_range... "no"
checking for new remap_page_range... "no"
checking for kcalloc... "no"
checking for saved_config_space in pci_dev... "no"
checking for acpi_register_gsi... "no"
Removing local linux/pnp.h.
checking for driver version... 1.0.7
checking for sequencer support... yes
checking for OSS/Free emulation... yes
checking for RTC callback support in kernel... "yes"
checking for Procfs support... "yes"
checking for USB support... "yes"
checking for kernel PCMCIA
checking for PCMCIA support... "no"
checking for PCMCIA module support... "no"
checking for PC9800 support in kernel... "no"
checking for parallel port support... "no"
checking for parallel port module support... "no"
checking for processor type... i686
checking for i386 machine type... default
checking for which soundcards to compile driver for... emu10k1
configure: creating ./config.status
config.status: creating version
config.status: creating Makefile.conf
config.status: creating snddevices
config.status: creating utils/alsa-driver.spec
config.status: creating utils/buildrpm
config.status: creating toplevel.config
config.status: creating utils/alsasound
config.status: creating utils/alsasound.posix
config.status: creating include/config.h
config.status: creating include/config1.h
config.status: creating include/version.h
config.status: include/version.h is unchanged
config.status: creating include/autoconf-extra.h
----------------------------------------------------------------------
tiwai - 11-29-04 17:20
----------------------------------------------------------------------
Apparently the configure couldn't detect vmalloc_to_page().
Do you have config.log for this check?
Issue History
Date Modified Username Field Change
======================================================================
11-28-04 19:06 m_wright New Issue
11-28-04 19:06 m_wright Distribution => Gentoo Linux
11-28-04 19:06 m_wright Kernel Version => 2.6.9-ck2
11-29-04 15:27 tiwai Note Added: 0002638
11-29-04 16:41 m_wright Note Added: 0002653
11-29-04 17:20 tiwai Note Added: 0002655
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
^ permalink raw reply [flat|nested] 11+ messages in thread* [ALSA - driver 0000687]: Cannot build gentoo-ebuild for 1.0.7
@ 2004-12-01 15:01 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2004-12-01 15:01 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=687>
======================================================================
Reported By: m_wright
Assigned To: perex
======================================================================
Project: ALSA - driver
Issue ID: 687
Category: 0_compilation problem_!!!
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution: Gentoo Linux
Kernel Version: 2.6.9-ck2
======================================================================
Date Submitted: 11-28-2004 19:06 CET
Last Modified: 12-01-2004 16:01 CET
======================================================================
Summary: Cannot build gentoo-ebuild for 1.0.7
Description:
The gentoo ebuild for 1.0.7-r1 (basically 1.0.7) fails on linux kernel
2.6.9-ck2 with the following errors:
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:
In function `snd_compat_vmalloc_to_page':
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:41:
warning: implicit declaration of function `VMALLOC_VMADDR'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: implicit declaration of function `pte_offset'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: assignment makes pointer from integer without a cast
======================================================================
----------------------------------------------------------------------
tiwai - 11-29-04 17:20
----------------------------------------------------------------------
Apparently the configure couldn't detect vmalloc_to_page().
Do you have config.log for this check?
----------------------------------------------------------------------
ebichu - 12-01-04 16:01
----------------------------------------------------------------------
I'm using a later Gentoo ebuild (alsa-driver-1.0.7-r1) and a vanilla kernel
(2.6.9) but it fails in the same place. The config.log entry for
vmalloc_to_page is as follows:
configure:5965: checking for vmalloc_to_page
configure:5994: i686-pc-linux-gnu-gcc -c -march=athlon -O3 -pipe
-fomit-frame-pointer -I/usr/src/linux/include -nostdinc -iwithprefix
include conftest.c >&5
In file included from /usr/src/linux/include/asm/smp.h:18,
from /usr/src/linux/include/linux/smp.h:17,
from /usr/src/linux/include/linux/sched.h:23,
from /usr/src/linux/include/linux/mm.h:4,
from conftest.c:25:
/usr/src/linux/include/asm/mpspec.h:6:25: mach_mpspec.h: No such file or
directory
In file included from /usr/src/linux/include/asm/smp.h:18,
from /usr/src/linux/include/linux/smp.h:17,
from /usr/src/linux/include/linux/sched.h:23,
from /usr/src/linux/include/linux/mm.h:4,
from conftest.c:25:
/usr/src/linux/include/asm/mpspec.h:8: error: `MAX_MP_BUSSES' undeclared
here (not in a function)
/usr/src/linux/include/asm/mpspec.h:22: error: `MAX_IRQ_SOURCES'
undeclared here (not in a function)
In file included from /usr/src/linux/include/linux/smp.h:17,
from /usr/src/linux/include/linux/sched.h:23,
from /usr/src/linux/include/linux/mm.h:4,
from conftest.c:25:
/usr/src/linux/include/asm/smp.h:72:26: mach_apicdef.h: No such file or
directory
configure:6000: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define STDC_HEADERS 1
| #define TIME_WITH_SYS_TIME 1
| #define CONFIG_SND_KERNELDIR "/usr/src/linux"
| #define CONFIG_HAVE_DUMP_STACK 1
| #define CONFIG_SND_VERBOSE_PRINTK 1
| #define CONFIG_SND_ISA 1
| #define CONFIG_ISAPNP_KERNEL 1
| #define CONFIG_PNP_KERNEL 1
| #define CONFIG_HAVE_STRLCPY 1
| #define CONFIG_HAVE_SNPRINTF 1
| #define CONFIG_HAVE_SCNPRINTF 1
| #define CONFIG_HAVE_SSCANF 1
| /* end confdefs.h. */
|
| #define __KERNEL__
| #include <linux/config.h>
| #include <linux/time.h>
| #include <linux/mm.h>
|
| int
| main ()
| {
|
| struct page * (*func)(void*);
| func = vmalloc_to_page;
|
| ;
| return 0;
| }
configure:6021: result: "no"
Issue History
Date Modified Username Field Change
======================================================================
11-28-04 19:06 m_wright New Issue
11-28-04 19:06 m_wright Distribution => Gentoo Linux
11-28-04 19:06 m_wright Kernel Version => 2.6.9-ck2
11-29-04 15:27 tiwai Note Added: 0002638
11-29-04 16:41 m_wright Note Added: 0002653
11-29-04 17:20 tiwai Note Added: 0002655
12-01-04 16:01 ebichu Note Added: 0002665
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
^ permalink raw reply [flat|nested] 11+ messages in thread* [ALSA - driver 0000687]: Cannot build gentoo-ebuild for 1.0.7
@ 2004-12-01 15:35 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2004-12-01 15:35 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=687>
======================================================================
Reported By: m_wright
Assigned To: perex
======================================================================
Project: ALSA - driver
Issue ID: 687
Category: 0_compilation problem_!!!
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution: Gentoo Linux
Kernel Version: 2.6.9-ck2
======================================================================
Date Submitted: 11-28-2004 19:06 CET
Last Modified: 12-01-2004 16:35 CET
======================================================================
Summary: Cannot build gentoo-ebuild for 1.0.7
Description:
The gentoo ebuild for 1.0.7-r1 (basically 1.0.7) fails on linux kernel
2.6.9-ck2 with the following errors:
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:
In function `snd_compat_vmalloc_to_page':
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:41:
warning: implicit declaration of function `VMALLOC_VMADDR'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: implicit declaration of function `pte_offset'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: assignment makes pointer from integer without a cast
======================================================================
----------------------------------------------------------------------
ebichu - 12-01-04 16:01
----------------------------------------------------------------------
I'm using a later Gentoo ebuild (alsa-driver-1.0.7-r1) and a vanilla kernel
(2.6.9) but it fails in the same place. The config.log entry for
vmalloc_to_page is as follows:
configure:5965: checking for vmalloc_to_page
configure:5994: i686-pc-linux-gnu-gcc -c -march=athlon -O3 -pipe
-fomit-frame-pointer -I/usr/src/linux/include -nostdinc -iwithprefix
include conftest.c >&5
In file included from /usr/src/linux/include/asm/smp.h:18,
from /usr/src/linux/include/linux/smp.h:17,
from /usr/src/linux/include/linux/sched.h:23,
from /usr/src/linux/include/linux/mm.h:4,
from conftest.c:25:
/usr/src/linux/include/asm/mpspec.h:6:25: mach_mpspec.h: No such file or
directory
In file included from /usr/src/linux/include/asm/smp.h:18,
from /usr/src/linux/include/linux/smp.h:17,
from /usr/src/linux/include/linux/sched.h:23,
from /usr/src/linux/include/linux/mm.h:4,
from conftest.c:25:
/usr/src/linux/include/asm/mpspec.h:8: error: `MAX_MP_BUSSES' undeclared
here (not in a function)
/usr/src/linux/include/asm/mpspec.h:22: error: `MAX_IRQ_SOURCES'
undeclared here (not in a function)
In file included from /usr/src/linux/include/linux/smp.h:17,
from /usr/src/linux/include/linux/sched.h:23,
from /usr/src/linux/include/linux/mm.h:4,
from conftest.c:25:
/usr/src/linux/include/asm/smp.h:72:26: mach_apicdef.h: No such file or
directory
configure:6000: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define STDC_HEADERS 1
| #define TIME_WITH_SYS_TIME 1
| #define CONFIG_SND_KERNELDIR "/usr/src/linux"
| #define CONFIG_HAVE_DUMP_STACK 1
| #define CONFIG_SND_VERBOSE_PRINTK 1
| #define CONFIG_SND_ISA 1
| #define CONFIG_ISAPNP_KERNEL 1
| #define CONFIG_PNP_KERNEL 1
| #define CONFIG_HAVE_STRLCPY 1
| #define CONFIG_HAVE_SNPRINTF 1
| #define CONFIG_HAVE_SCNPRINTF 1
| #define CONFIG_HAVE_SSCANF 1
| /* end confdefs.h. */
|
| #define __KERNEL__
| #include <linux/config.h>
| #include <linux/time.h>
| #include <linux/mm.h>
|
| int
| main ()
| {
|
| struct page * (*func)(void*);
| func = vmalloc_to_page;
|
| ;
| return 0;
| }
configure:6021: result: "no"
----------------------------------------------------------------------
tiwai - 12-01-04 16:35
----------------------------------------------------------------------
Check whether /usr/src/linux/include/asm-i386/mach-default/mach_mpspec.h
exists.
Issue History
Date Modified Username Field Change
======================================================================
11-28-04 19:06 m_wright New Issue
11-28-04 19:06 m_wright Distribution => Gentoo Linux
11-28-04 19:06 m_wright Kernel Version => 2.6.9-ck2
11-29-04 15:27 tiwai Note Added: 0002638
11-29-04 16:41 m_wright Note Added: 0002653
11-29-04 17:20 tiwai Note Added: 0002655
12-01-04 16:01 ebichu Note Added: 0002665
12-01-04 16:01 ebichu Issue Monitored: ebichu
12-01-04 16:35 tiwai Note Added: 0002666
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
^ permalink raw reply [flat|nested] 11+ messages in thread* [ALSA - driver 0000687]: Cannot build gentoo-ebuild for 1.0.7
@ 2004-12-01 17:25 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2004-12-01 17:25 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=687>
======================================================================
Reported By: m_wright
Assigned To: perex
======================================================================
Project: ALSA - driver
Issue ID: 687
Category: 0_compilation problem_!!!
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution: Gentoo Linux
Kernel Version: 2.6.9-ck2
======================================================================
Date Submitted: 11-28-2004 19:06 CET
Last Modified: 12-01-2004 18:25 CET
======================================================================
Summary: Cannot build gentoo-ebuild for 1.0.7
Description:
The gentoo ebuild for 1.0.7-r1 (basically 1.0.7) fails on linux kernel
2.6.9-ck2 with the following errors:
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:
In function `snd_compat_vmalloc_to_page':
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:41:
warning: implicit declaration of function `VMALLOC_VMADDR'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: implicit declaration of function `pte_offset'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: assignment makes pointer from integer without a cast
======================================================================
----------------------------------------------------------------------
tiwai - 12-01-04 16:35
----------------------------------------------------------------------
Check whether /usr/src/linux/include/asm-i386/mach-default/mach_mpspec.h
exists.
----------------------------------------------------------------------
ebichu - 12-01-04 18:25
----------------------------------------------------------------------
Yes, /usr/src/linux/include/asm-i386/mach-default/mach_mpspec.h exists.
I notice that include/asm-i386/mpspec.h has the following line:
#include <mach_mpspec.h>
I guess it fails because some -I option doesn't get set.
Issue History
Date Modified Username Field Change
======================================================================
11-28-04 19:06 m_wright New Issue
11-28-04 19:06 m_wright Distribution => Gentoo Linux
11-28-04 19:06 m_wright Kernel Version => 2.6.9-ck2
11-29-04 15:27 tiwai Note Added: 0002638
11-29-04 16:41 m_wright Note Added: 0002653
11-29-04 17:20 tiwai Note Added: 0002655
12-01-04 16:01 ebichu Note Added: 0002665
12-01-04 16:01 ebichu Issue Monitored: ebichu
12-01-04 16:35 tiwai Note Added: 0002666
12-01-04 18:25 ebichu Note Added: 0002667
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0000687]: Cannot build gentoo-ebuild for 1.0.7
@ 2004-12-01 18:06 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2004-12-01 18:06 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=687>
======================================================================
Reported By: m_wright
Assigned To: perex
======================================================================
Project: ALSA - driver
Issue ID: 687
Category: 0_compilation problem_!!!
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution: Gentoo Linux
Kernel Version: 2.6.9-ck2
======================================================================
Date Submitted: 11-28-2004 19:06 CET
Last Modified: 12-01-2004 19:06 CET
======================================================================
Summary: Cannot build gentoo-ebuild for 1.0.7
Description:
The gentoo ebuild for 1.0.7-r1 (basically 1.0.7) fails on linux kernel
2.6.9-ck2 with the following errors:
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:
In function `snd_compat_vmalloc_to_page':
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:41:
warning: implicit declaration of function `VMALLOC_VMADDR'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: implicit declaration of function `pte_offset'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: assignment makes pointer from integer without a cast
======================================================================
----------------------------------------------------------------------
ebichu - 12-01-04 18:25
----------------------------------------------------------------------
Yes, /usr/src/linux/include/asm-i386/mach-default/mach_mpspec.h exists.
I notice that include/asm-i386/mpspec.h has the following line:
#include <mach_mpspec.h>
I guess it fails because some -I option doesn't get set.
----------------------------------------------------------------------
tiwai - 12-01-04 19:06
----------------------------------------------------------------------
Yes, that's exactly my guess. The question is why. The configure script
checked the mach-* directory as shown in the configure output, so it
should have set -I option there.
checking for processor type... i686
checking for i386 machine type... default
Anyway, if possible, try CVS version instead.
The configure has been much changed since 1.0.7 release.
Issue History
Date Modified Username Field Change
======================================================================
11-28-04 19:06 m_wright New Issue
11-28-04 19:06 m_wright Distribution => Gentoo Linux
11-28-04 19:06 m_wright Kernel Version => 2.6.9-ck2
11-29-04 15:27 tiwai Note Added: 0002638
11-29-04 16:41 m_wright Note Added: 0002653
11-29-04 17:20 tiwai Note Added: 0002655
12-01-04 16:01 ebichu Note Added: 0002665
12-01-04 16:01 ebichu Issue Monitored: ebichu
12-01-04 16:35 tiwai Note Added: 0002666
12-01-04 18:25 ebichu Note Added: 0002667
12-01-04 19:06 tiwai Note Added: 0002668
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0000687]: Cannot build gentoo-ebuild for 1.0.7
@ 2004-12-01 19:42 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2004-12-01 19:42 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=687>
======================================================================
Reported By: m_wright
Assigned To: perex
======================================================================
Project: ALSA - driver
Issue ID: 687
Category: 0_compilation problem_!!!
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution: Gentoo Linux
Kernel Version: 2.6.9-ck2
======================================================================
Date Submitted: 11-28-2004 19:06 CET
Last Modified: 12-01-2004 20:42 CET
======================================================================
Summary: Cannot build gentoo-ebuild for 1.0.7
Description:
The gentoo ebuild for 1.0.7-r1 (basically 1.0.7) fails on linux kernel
2.6.9-ck2 with the following errors:
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:
In function `snd_compat_vmalloc_to_page':
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:41:
warning: implicit declaration of function `VMALLOC_VMADDR'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: implicit declaration of function `pte_offset'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: assignment makes pointer from integer without a cast
======================================================================
----------------------------------------------------------------------
tiwai - 12-01-04 19:06
----------------------------------------------------------------------
Yes, that's exactly my guess. The question is why. The configure script
checked the mach-* directory as shown in the configure output, so it
should have set -I option there.
checking for processor type... i686
checking for i386 machine type... default
Anyway, if possible, try CVS version instead.
The configure has been much changed since 1.0.7 release.
----------------------------------------------------------------------
ebichu - 12-01-04 20:42
----------------------------------------------------------------------
Is it because configure is checking the processor type and machine type
*after* checking for vmalloc_to_page?
It looks like a Gentoo-specific bug, as the Gentoo ebuild script patches
the configure script to change the order of the configuration options. It
seems this was done to support compilation on sparc64 (at least according
to the comments in Gentoo's CVS). I'll bounce this back to the Gentoo
developers.
Issue History
Date Modified Username Field Change
======================================================================
11-28-04 19:06 m_wright New Issue
11-28-04 19:06 m_wright Distribution => Gentoo Linux
11-28-04 19:06 m_wright Kernel Version => 2.6.9-ck2
11-29-04 15:27 tiwai Note Added: 0002638
11-29-04 16:41 m_wright Note Added: 0002653
11-29-04 17:20 tiwai Note Added: 0002655
12-01-04 16:01 ebichu Note Added: 0002665
12-01-04 16:01 ebichu Issue Monitored: ebichu
12-01-04 16:35 tiwai Note Added: 0002666
12-01-04 18:25 ebichu Note Added: 0002667
12-01-04 19:06 tiwai Note Added: 0002668
12-01-04 20:42 ebichu Note Added: 0002669
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0000687]: Cannot build gentoo-ebuild for 1.0.7
@ 2004-12-01 22:25 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2004-12-01 22:25 UTC (permalink / raw)
To: alsa-devel
The following issue has been RESOLVED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=687>
======================================================================
Reported By: m_wright
Assigned To: perex
======================================================================
Project: ALSA - driver
Issue ID: 687
Category: 0_compilation problem_!!!
Reproducibility: always
Severity: minor
Priority: normal
Status: resolved
Distribution: Gentoo Linux
Kernel Version: 2.6.9-ck2
Resolution: won't fix
Fixed in Version:
======================================================================
Date Submitted: 11-28-2004 19:06 CET
Last Modified: 12-01-2004 23:25 CET
======================================================================
Summary: Cannot build gentoo-ebuild for 1.0.7
Description:
The gentoo ebuild for 1.0.7-r1 (basically 1.0.7) fails on linux kernel
2.6.9-ck2 with the following errors:
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:
In function `snd_compat_vmalloc_to_page':
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:41:
warning: implicit declaration of function `VMALLOC_VMADDR'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: implicit declaration of function `pte_offset'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: assignment makes pointer from integer without a cast
======================================================================
----------------------------------------------------------------------
ebichu - 12-01-04 20:42
----------------------------------------------------------------------
Is it because configure is checking the processor type and machine type
*after* checking for vmalloc_to_page?
It looks like a Gentoo-specific bug, as the Gentoo ebuild script patches
the configure script to change the order of the configuration options. It
seems this was done to support compilation on sparc64 (at least according
to the comments in Gentoo's CVS). I'll bounce this back to the Gentoo
developers.
----------------------------------------------------------------------
tiwai - 12-01-04 23:25
----------------------------------------------------------------------
Yes, that explains why. Obviously the patch is broken.
I set this to wont fix, since this issue was solved differently on CVS.
Issue History
Date Modified Username Field Change
======================================================================
11-28-04 19:06 m_wright New Issue
11-28-04 19:06 m_wright Distribution => Gentoo Linux
11-28-04 19:06 m_wright Kernel Version => 2.6.9-ck2
11-29-04 15:27 tiwai Note Added: 0002638
11-29-04 16:41 m_wright Note Added: 0002653
11-29-04 17:20 tiwai Note Added: 0002655
12-01-04 16:01 ebichu Note Added: 0002665
12-01-04 16:01 ebichu Issue Monitored: ebichu
12-01-04 16:35 tiwai Note Added: 0002666
12-01-04 18:25 ebichu Note Added: 0002667
12-01-04 19:06 tiwai Note Added: 0002668
12-01-04 20:42 ebichu Note Added: 0002669
12-01-04 23:25 tiwai Status assigned => resolved
12-01-04 23:25 tiwai Resolution open => won't fix
12-01-04 23:25 tiwai Note Added: 0002670
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0000687]: Cannot build gentoo-ebuild for 1.0.7
@ 2005-01-03 15:54 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2005-01-03 15:54 UTC (permalink / raw)
To: alsa-devel
The following issue has been CLOSED
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=687>
======================================================================
Reported By: m_wright
Assigned To: perex
======================================================================
Project: ALSA - driver
Issue ID: 687
Category: 0_compilation problem_!!!
Reproducibility: always
Severity: minor
Priority: normal
Status: closed
Distribution: Gentoo Linux
Kernel Version: 2.6.9-ck2
Resolution: won't fix
Fixed in Version:
======================================================================
Date Submitted: 11-28-2004 19:06 CET
Last Modified: 01-03-2005 16:54 CET
======================================================================
Summary: Cannot build gentoo-ebuild for 1.0.7
Description:
The gentoo ebuild for 1.0.7-r1 (basically 1.0.7) fails on linux kernel
2.6.9-ck2 with the following errors:
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:
In function `snd_compat_vmalloc_to_page':
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:41:
warning: implicit declaration of function `VMALLOC_VMADDR'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: implicit declaration of function `pte_offset'
/var/tmp/portage/alsa-driver-1.0.7-r1/work/alsa-driver-1.0.7/acore/memory_wrapper.c:47:
warning: assignment makes pointer from integer without a cast
======================================================================
----------------------------------------------------------------------
ebichu - 12-01-04 20:42
----------------------------------------------------------------------
Is it because configure is checking the processor type and machine type
*after* checking for vmalloc_to_page?
It looks like a Gentoo-specific bug, as the Gentoo ebuild script patches
the configure script to change the order of the configuration options. It
seems this was done to support compilation on sparc64 (at least according
to the comments in Gentoo's CVS). I'll bounce this back to the Gentoo
developers.
----------------------------------------------------------------------
tiwai - 12-01-04 23:25
----------------------------------------------------------------------
Yes, that explains why. Obviously the patch is broken.
I set this to wont fix, since this issue was solved differently on CVS.
Issue History
Date Modified Username Field Change
======================================================================
11-28-04 19:06 m_wright New Issue
11-28-04 19:06 m_wright Distribution => Gentoo Linux
11-28-04 19:06 m_wright Kernel Version => 2.6.9-ck2
11-29-04 15:27 tiwai Note Added: 0002638
11-29-04 16:41 m_wright Note Added: 0002653
11-29-04 17:20 tiwai Note Added: 0002655
12-01-04 16:01 ebichu Note Added: 0002665
12-01-04 16:01 ebichu Issue Monitored: ebichu
12-01-04 16:35 tiwai Note Added: 0002666
12-01-04 18:25 ebichu Note Added: 0002667
12-01-04 19:06 tiwai Note Added: 0002668
12-01-04 20:42 ebichu Note Added: 0002669
12-01-04 23:25 tiwai Status assigned => resolved
12-01-04 23:25 tiwai Resolution open => won't fix
12-01-04 23:25 tiwai Note Added: 0002670
01-03-05 16:54 tiwai Status resolved => closed
======================================================================
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2005-01-03 15:54 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-11-28 18:06 [ALSA - driver 0000687]: Cannot build gentoo-ebuild for 1.0.7 bugtrack
-- strict thread matches above, loose matches on Subject: below --
2004-11-29 14:27 bugtrack
2004-11-29 15:41 bugtrack
2004-11-29 16:20 bugtrack
2004-12-01 15:01 bugtrack
2004-12-01 15:35 bugtrack
2004-12-01 17:25 bugtrack
2004-12-01 18:06 bugtrack
2004-12-01 19:42 bugtrack
2004-12-01 22:25 bugtrack
2005-01-03 15:54 bugtrack
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.