[PATCH 0/3] Commonize Glymur regulator settings for fixed rails

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH 0/3] Commonize Glymur regulator settings for fixed rails
@ 2026-10-28 20:04 Konrad Dybcio
  2026-10-28 20:04 ` [PATCH 1/3] arm64: dts: qcom: Unify Glymur/Mahua regulator handles Konrad Dybcio
                   ` (3 more replies)
  0 siblings, 4 replies; 10+ messages in thread
From: Konrad Dybcio @ 2026-10-28 20:04 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Dmitry Baryshkov,
	Gopikrishna Garmidi
  Cc: linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio

Certain rails are predefined and will ALWAYS have to be the same for a
given PMIC configuration (due to electrical and other requirements).
Factor these out to remove a layer of pain when creating DTs and let
one have a better way to reason about the settings across the platform.

Glymur-SiP will be the next target after/if this is accepted

Compile-tested only

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
Konrad Dybcio (3):
      arm64: dts: qcom: Unify Glymur/Mahua regulator handles
      arm64: dts: qcom: Consolidate Glymur CoB power grid
      arm64: dts: qcom: glymur-crd: Drop L4F0

 .../dts/qcom/glymur-asus-zenbook-a14-ux3407na.dts  | 235 +-----------
 .../dts/qcom/glymur-asus-zenbook-a16-ux3607oa.dts  | 232 ++++++------
 arch/arm64/boot/dts/qcom/glymur-cob.dtsi           | 310 ++++++++++++++++
 arch/arm64/boot/dts/qcom/glymur-crd.dts            |  29 +-
 arch/arm64/boot/dts/qcom/glymur-crd.dtsi           | 395 +++++---------------
 .../boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts    | 224 +----------
 .../boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts    | 333 +++--------------
 arch/arm64/boot/dts/qcom/glymur-qcb.dts            | 330 +++--------------
 arch/arm64/boot/dts/qcom/mahua-crd.dts             |  29 +-
 .../qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts   | 408 ++++-----------------
 arch/arm64/boot/dts/qcom/mahua.dtsi                |   2 +-
 11 files changed, 740 insertions(+), 1787 deletions(-)
---
base-commit: 151a134a4e6ec66f69db8750c66006f5207f7a9d
change-id: 20261028-topic-sip_cob-65df3325ed28

Best regards,
--  
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 1/3] arm64: dts: qcom: Unify Glymur/Mahua regulator handles
  2026-10-28 20:04 [PATCH 0/3] Commonize Glymur regulator settings for fixed rails Konrad Dybcio
@ 2026-10-28 20:04 ` Konrad Dybcio
  2026-10-29  8:36   ` Abel Vesa
  2026-10-28 20:04 ` [PATCH 2/3] arm64: dts: qcom: Consolidate Glymur CoB power grid Konrad Dybcio
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 10+ messages in thread
From: Konrad Dybcio @ 2026-10-28 20:04 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Dmitry Baryshkov,
	Gopikrishna Garmidi
  Cc: linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio

From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

In preparation for removing on-SoC invariants from each device's DT,
start with aligning the regulator names and phandles to the format that
appears on schematics.

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 .../dts/qcom/glymur-asus-zenbook-a16-ux3607oa.dts  | 232 +++++++++---------
 arch/arm64/boot/dts/qcom/glymur-crd.dts            |  42 ++--
 arch/arm64/boot/dts/qcom/glymur-crd.dtsi           | 230 +++++++++---------
 .../boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts    | 178 +++++++-------
 .../boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts    | 224 ++++++++---------
 arch/arm64/boot/dts/qcom/glymur-qcb.dts            | 172 ++++++-------
 arch/arm64/boot/dts/qcom/mahua-crd.dts             |  30 +--
 .../qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts   | 266 ++++++++++-----------
 8 files changed, 687 insertions(+), 687 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur-asus-zenbook-a16-ux3607oa.dts b/arch/arm64/boot/dts/qcom/glymur-asus-zenbook-a16-ux3607oa.dts
index 95da35125d75..e42e6c43f6a3 100644
--- a/arch/arm64/boot/dts/qcom/glymur-asus-zenbook-a16-ux3607oa.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-asus-zenbook-a16-ux3607oa.dts
@@ -334,7 +334,7 @@ platform {
 	wlan-connector {
 		compatible = "pcie-m2-e-connector";
 		vpcie3v3-supply = <&vreg_wcn_3p3>;
-		vpcie1v8-supply = <&vreg_l15b_e0>;
+		vpcie1v8-supply = <&vreg_l15b0>;
 
 		w-disable1-gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
 		w-disable2-gpios = <&tlmm 116 GPIO_ACTIVE_LOW>;
@@ -377,71 +377,71 @@ regulators-0 {
 		compatible = "qcom,pmh0101-rpmh-regulators";
 		qcom,pmic-id = "B_E0";
 
-		vreg_l1b_e0: ldo1 {
-			regulator-name = "vreg_l1b_e0";
+		vreg_l1b0: ldo1 {
+			regulator-name = "vreg_l1b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		/* Unused */
-		vreg_l2b_e0: ldo2 {
-			regulator-name = "vreg_l2b_e0";
+		vreg_l2b0: ldo2 {
+			regulator-name = "vreg_l2b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
 
-		vreg_l6b_e0: ldo6 {
-			regulator-name = "vreg_l6b_e0";
+		vreg_l6b0: ldo6 {
+			regulator-name = "vreg_l6b0";
 			regulator-min-microvolt = <3304000>;
 			regulator-max-microvolt = <3304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l7b_e0: ldo7 {
-			regulator-name = "vreg_l7b_e0";
+		vreg_l7b0: ldo7 {
+			regulator-name = "vreg_l7b0";
 			regulator-min-microvolt = <3072000>;
 			regulator-max-microvolt = <3072000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l8b_e0: ldo8 {
-			regulator-name = "vreg_l8b_e0";
+		vreg_l8b0: ldo8 {
+			regulator-name = "vreg_l8b0";
 			regulator-min-microvolt = <3304000>;
 			regulator-max-microvolt = <3304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		/* Unused */
-		vreg_l9b_e0: ldo9 {
-			regulator-name = "vreg_l9b_e0";
+		vreg_l9b0: ldo9 {
+			regulator-name = "vreg_l9b0";
 			regulator-min-microvolt = <2960000>;
 			regulator-max-microvolt = <2960000>;
 		};
 
-		vreg_l10b_e0: ldo10 {
-			regulator-name = "vreg_l10b_e0";
+		vreg_l10b0: ldo10 {
+			regulator-name = "vreg_l10b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l11b_e0: ldo11 {
-			regulator-name = "vreg_l11b_e0";
+		vreg_l11b0: ldo11 {
+			regulator-name = "vreg_l11b0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		/* Unused */
-		vreg_l12b_e0: ldo12 {
-			regulator-name = "vreg_l12b_e0";
+		vreg_l12b0: ldo12 {
+			regulator-name = "vreg_l12b0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 		};
 
-		vreg_l15b_e0: ldo15 {
-			regulator-name = "vreg_l15b_e0";
+		vreg_l15b0: ldo15 {
+			regulator-name = "vreg_l15b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -450,14 +450,14 @@ vreg_l15b_e0: ldo15 {
 		};
 
 		/* Unused */
-		vreg_l17b_e0: ldo17 {
-			regulator-name = "vreg_l17b_e0";
+		vreg_l17b0: ldo17 {
+			regulator-name = "vreg_l17b0";
 			regulator-min-microvolt = <2504000>;
 			regulator-max-microvolt = <2504000>;
 		};
 
-		vreg_l18b_e0: ldo18 {
-			regulator-name = "vreg_l18b_e0";
+		vreg_l18b0: ldo18 {
+			regulator-name = "vreg_l18b0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -471,22 +471,22 @@ regulators-1 {
 		compatible = "qcom,pmcx0102-rpmh-regulators";
 		qcom,pmic-id = "C_E0";
 
-		vreg_l1c_e0: ldo1 {
-			regulator-name = "vreg_l1c_e0";
+		vreg_l1c0: ldo1 {
+			regulator-name = "vreg_l1c0";
 			regulator-min-microvolt = <936000>;
 			regulator-max-microvolt = <936000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2c_e0: ldo2 {
-			regulator-name = "vreg_l2c_e0";
+		vreg_l2c0: ldo2 {
+			regulator-name = "vreg_l2c0";
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4c_e0: ldo4 {
-			regulator-name = "vreg_l4c_e0";
+		vreg_l4c0: ldo4 {
+			regulator-name = "vreg_l4c0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -498,29 +498,29 @@ regulators-2 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "F_E0";
 
-		vreg_s7f_e0: smps7 {
-			regulator-name = "vreg_s7f_e0";
+		vreg_s7f0: smps7 {
+			regulator-name = "vreg_s7f0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_s8f_e0: smps8 {
-			regulator-name = "vreg_s8f_e0";
+		vreg_s8f0: smps8 {
+			regulator-name = "vreg_s8f0";
 			regulator-min-microvolt = <952000>;
 			regulator-max-microvolt = <952000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2f_e0: ldo2 {
-			regulator-name = "vreg_l2f_e0";
+		vreg_l2f0: ldo2 {
+			regulator-name = "vreg_l2f0";
 			regulator-min-microvolt = <936000>;
 			regulator-max-microvolt = <936000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3f_e0: ldo3 {
-			regulator-name = "vreg_l3f_e0";
+		vreg_l3f0: ldo3 {
+			regulator-name = "vreg_l3f0";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -531,29 +531,29 @@ regulators-3 {
 		compatible = "qcom,pmcx0102-rpmh-regulators";
 		qcom,pmic-id = "C_E1";
 
-		vreg_l1c_e1: ldo1 {
-			regulator-name = "vreg_l1c_e1";
+		vreg_l1c1: ldo1 {
+			regulator-name = "vreg_l1c1";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2c_e1: ldo2 {
-			regulator-name = "vreg_l2c_e1";
+		vreg_l2c1: ldo2 {
+			regulator-name = "vreg_l2c1";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3c_e1: ldo3 {
-			regulator-name = "vreg_l3c_e1";
+		vreg_l3c1: ldo3 {
+			regulator-name = "vreg_l3c1";
 			regulator-min-microvolt = <936000>;
 			regulator-max-microvolt = <936000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4c_e1: ldo4 {
-			regulator-name = "vreg_l4c_e1";
+		vreg_l4c1: ldo4 {
+			regulator-name = "vreg_l4c1";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -565,22 +565,22 @@ regulators-4 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "F_E1";
 
-		vreg_l1f_e1: ldo1 {
-			regulator-name = "vreg_l1f_e1";
+		vreg_l1f1: ldo1 {
+			regulator-name = "vreg_l1f1";
 			regulator-min-microvolt = <904000>;
 			regulator-max-microvolt = <904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2f_e1: ldo2 {
-			regulator-name = "vreg_l2f_e1";
+		vreg_l2f1: ldo2 {
+			regulator-name = "vreg_l2f1";
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4f_e1: ldo4 {
-			regulator-name = "vreg_l4f_e1";
+		vreg_l4f1: ldo4 {
+			regulator-name = "vreg_l4f1";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -627,8 +627,8 @@ ptn3222_1: redriver@43 {
 
 		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
 
-		vdd3v3-supply = <&vreg_l8b_e0>;
-		vdd1v8-supply = <&vreg_l15b_e0>;
+		vdd3v3-supply = <&vreg_l8b0>;
+		vdd1v8-supply = <&vreg_l15b0>;
 
 		#phy-cells = <0>;
 	};
@@ -639,8 +639,8 @@ ptn3222_0: redriver@4f {
 
 		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
 
-		vdd3v3-supply = <&vreg_l8b_e0>;
-		vdd1v8-supply = <&vreg_l15b_e0>;
+		vdd3v3-supply = <&vreg_l8b0>;
+		vdd1v8-supply = <&vreg_l15b0>;
 
 		#phy-cells = <0>;
 	};
@@ -732,7 +732,7 @@ misc_3p3_reg_en: misc-3p3-reg-en-state {
 };
 
 &lpass_vamacro {
-	vdd-micb-supply = <&vreg_l1b_e0>;
+	vdd-micb-supply = <&vreg_l1b0>;
 
 	pinctrl-0 = <&dmic01_default>;
 	pinctrl-names = "default";
@@ -802,8 +802,8 @@ &mdss_dp3_out {
 };
 
 &mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l2f_e1>;
-	vdda-pll-supply = <&vreg_l4f_e1>;
+	vdda-phy-supply = <&vreg_l2f1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -816,8 +816,8 @@ &pcie4 {
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l1c_e1>;
-	vdda-pll-supply = <&vreg_l4f_e1>;
+	vdda-phy-supply = <&vreg_l1c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -841,8 +841,8 @@ &pcie5 {
 };
 
 &pcie5_phy {
-	vdda-phy-supply = <&vreg_l2f_e0>;
-	vdda-pll-supply = <&vreg_l4c_e0>;
+	vdda-phy-supply = <&vreg_l2f0>;
+	vdda-pll-supply = <&vreg_l4c0>;
 
 	status = "okay";
 };
@@ -884,13 +884,13 @@ &remoteproc_soccp {
 };
 
 &smb2370_j_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b_e0>;
-	vdd3-supply = <&vreg_l7b_e0>;
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
 };
 
 &smb2370_k_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b_e0>;
-	vdd3-supply = <&vreg_l7b_e0>;
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
 };
 
 &swr0 {
@@ -903,8 +903,8 @@ left_woofer: speaker@0,0 {
 		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "WooferLeft";
-		vdd-1p8-supply = <&vreg_l15b_e0>;
-		vdd-io-supply = <&vreg_l18b_e0>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <1 2 3 7 12 14>;
 	};
 
@@ -915,8 +915,8 @@ left_tweeter: speaker@0,1 {
 		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TweeterLeft";
-		vdd-1p8-supply = <&vreg_l15b_e0>;
-		vdd-io-supply = <&vreg_l18b_e0>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <4 5 6 7 13 15>;
 	};
 };
@@ -931,8 +931,8 @@ right_woofer: speaker@0,0 {
 		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "WooferRight";
-		vdd-1p8-supply = <&vreg_l15b_e0>;
-		vdd-io-supply = <&vreg_l18b_e0>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <1 2 3 7 12 14>;
 	};
 
@@ -943,30 +943,30 @@ right_tweeter: speaker@0,1 {
 		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TweeterRight";
-		vdd-1p8-supply = <&vreg_l15b_e0>;
-		vdd-io-supply = <&vreg_l18b_e0>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <4 5 6 7 13 15>;
 	};
 };
 
 &tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f_e1>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f_e1>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f_e1>;
-	vdda-qrefrpt3-0p9-supply = <&vreg_l2c_e0>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2c_e0>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f_e1>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f_e1>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f_e1>;
-	vdda-qrefrx4-0p9-supply = <&vreg_l2c_e0>;
-	vdda-qrefrx5-0p9-supply = <&vreg_l3f_e0>;
-	vdda-qreftx0-0p9-supply = <&vreg_l3f_e0>;
-	vdda-qreftx0-1p2-supply = <&vreg_l4c_e0>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f_e1>;
-	vdda-refgen3-0p9-supply = <&vreg_l2f_e0>;
-	vdda-refgen3-1p2-supply = <&vreg_l4c_e0>;
-	vdda-refgen4-0p9-supply = <&vreg_l1f_e1>;
-	vdda-refgen4-1p2-supply = <&vreg_l4f_e1>;
+	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt3-0p9-supply = <&vreg_l2c0>;
+	vdda-qrefrpt4-0p9-supply = <&vreg_l2c0>;
+	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx4-0p9-supply = <&vreg_l2c0>;
+	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-1p2-supply = <&vreg_l4c0>;
+	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
+	vdda-refgen3-1p2-supply = <&vreg_l4c0>;
+	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
 };
 
 &tlmm {
@@ -1151,8 +1151,8 @@ &usb_0_dwc3_hs {
 };
 
 &usb_0_hsphy {
-	vdd-supply = <&vreg_l3f_e0>;
-	vdda12-supply = <&vreg_l4c_e0>;
+	vdd-supply = <&vreg_l3f0>;
+	vdda12-supply = <&vreg_l4c0>;
 
 	phys = <&smb2370_j_e2_eusb2_repeater>;
 
@@ -1160,9 +1160,9 @@ &usb_0_hsphy {
 };
 
 &usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l3f_e0>;
-	vdda-pll-supply = <&vreg_l4c_e0>;
-	refgen-supply = <&vreg_l2f_e0>;
+	vdda-phy-supply = <&vreg_l3f0>;
+	vdda-pll-supply = <&vreg_l4c0>;
+	refgen-supply = <&vreg_l2f0>;
 
 	status = "okay";
 };
@@ -1180,8 +1180,8 @@ &usb_1_dwc3_hs {
 };
 
 &usb_1_hsphy {
-	vdd-supply = <&vreg_l3f_e0>;
-	vdda12-supply = <&vreg_l4c_e0>;
+	vdd-supply = <&vreg_l3f0>;
+	vdda12-supply = <&vreg_l4c0>;
 
 	phys = <&smb2370_k_e2_eusb2_repeater>;
 
@@ -1189,9 +1189,9 @@ &usb_1_hsphy {
 };
 
 &usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l1c_e0>;
-	vdda-pll-supply = <&vreg_l4c_e0>;
-	refgen-supply = <&vreg_l2f_e0>;
+	vdda-phy-supply = <&vreg_l1c0>;
+	vdda-pll-supply = <&vreg_l4c0>;
+	refgen-supply = <&vreg_l2f0>;
 
 	status = "okay";
 };
@@ -1201,9 +1201,9 @@ &usb_1_qmpphy_out {
 };
 
 &usb_2_qmpphy {
-	vdda-phy-supply = <&vreg_l4c_e1>;
-	vdda-pll-supply = <&vreg_l4f_e1>;
-	refgen-supply = <&vreg_l4f_e1>;
+	vdda-phy-supply = <&vreg_l4c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
+	refgen-supply = <&vreg_l4f1>;
 
 	/delete-property/ mode-switch;
 	/delete-property/ orientation-switch;
@@ -1233,8 +1233,8 @@ &usb_mp {
 
 /* MP0 (eUSB3 + USBSS3) -> Type-A port */
 &usb_mp_hsphy0 {
-	vdd-supply = <&vreg_l2c_e0>;
-	vdda12-supply = <&vreg_l4c_e0>;
+	vdd-supply = <&vreg_l2c0>;
+	vdda12-supply = <&vreg_l4c0>;
 
 	phys = <&ptn3222_0>;
 
@@ -1243,8 +1243,8 @@ &usb_mp_hsphy0 {
 
 /* MP1 (eUSB6 + USBSS4) -> RTS5329 SD Card reader */
 &usb_mp_hsphy1 {
-	vdd-supply = <&vreg_l2c_e0>;
-	vdda12-supply = <&vreg_l4c_e0>;
+	vdd-supply = <&vreg_l2c0>;
+	vdda12-supply = <&vreg_l4c0>;
 
 	phys = <&ptn3222_1>;
 
@@ -1252,17 +1252,17 @@ &usb_mp_hsphy1 {
 };
 
 &usb_mp_qmpphy0 {
-	vdda-phy-supply = <&vreg_l2c_e0>;
-	vdda-pll-supply = <&vreg_l4c_e0>;
-	refgen-supply = <&vreg_l4f_e1>;
+	vdda-phy-supply = <&vreg_l2c0>;
+	vdda-pll-supply = <&vreg_l4c0>;
+	refgen-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
 
 &usb_mp_qmpphy1 {
-	vdda-phy-supply = <&vreg_l2c_e0>;
-	vdda-pll-supply = <&vreg_l4c_e0>;
-	refgen-supply = <&vreg_l4f_e1>;
+	vdda-phy-supply = <&vreg_l2c0>;
+	vdda-pll-supply = <&vreg_l4c0>;
+	refgen-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
index b8e3fedcdea8..dfac99056bcd 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
@@ -30,29 +30,29 @@ &mdss_dp1_out {
 };
 
 &pcie3_phy {
-	vdda-phy-supply = <&vreg_l3c_e1_0p89>;
-	vdda-pll-supply = <&vreg_l2c_e1_1p14>;
+	vdda-phy-supply = <&vreg_l3c1>;
+	vdda-pll-supply = <&vreg_l2c1>;
 
-	vdda-refgen0p9-supply = <&vreg_l1c_e1_0p82>;
-	vdda-refgen1p2-supply = <&vreg_l4f_e1_1p08>;
+	vdda-refgen0p9-supply = <&vreg_l1c1>;
+	vdda-refgen1p2-supply = <&vreg_l4f1>;
 };
 
 &tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrpt3-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrx4-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qrefrx5-0p9-supply = <&vreg_l3f_e0_0p72>;
-	vdda-qreftx0-0p9-supply = <&vreg_l3f_e0_0p72>;
-	vdda-qreftx0-1p2-supply = <&vreg_l4h_e0_1p2>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f_e1_0p82>;
-	vdda-refgen3-0p9-supply = <&vreg_l2f_e0_0p82>;
-	vdda-refgen3-1p2-supply = <&vreg_l4h_e0_1p2>;
-	vdda-refgen4-0p9-supply = <&vreg_l1f_e1_0p82>;
-	vdda-refgen4-1p2-supply = <&vreg_l4f_e1_1p08>;
+	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
+	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
+	vdda-refgen3-1p2-supply = <&vreg_l4h0>;
+	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
 };
diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
index 58158b51fe29..4744bcb3c123 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
@@ -289,11 +289,11 @@ wcn7850-pmu {
 		compatible = "qcom,wcn7850-pmu";
 
 		vdd-supply = <&vreg_wcn_0p95>;
-		vddio-supply = <&vreg_l15b_e0_1p8>;
-		vddaon-supply = <&vreg_l15b_e0_1p8>;
-		vdddig-supply = <&vreg_l15b_e0_1p8>;
-		vddrfa1p2-supply = <&vreg_l15b_e0_1p8>;
-		vddrfa1p8-supply = <&vreg_l15b_e0_1p8>;
+		vddio-supply = <&vreg_l15b0>;
+		vddaon-supply = <&vreg_l15b0>;
+		vdddig-supply = <&vreg_l15b0>;
+		vddrfa1p2-supply = <&vreg_l15b0>;
+		vddrfa1p8-supply = <&vreg_l15b0>;
 
 		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
 		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
@@ -364,78 +364,78 @@ vreg_bob2_e0: bob2 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 		};
 
-		vreg_l1b_e0_1p8: ldo1 {
-			regulator-name = "vreg_l1b_e0_1p8";
+		vreg_l1b0: ldo1 {
+			regulator-name = "vreg_l1b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2b_e0_2p9: ldo2 {
-			regulator-name = "vreg_l2b_e0_2p9";
+		vreg_l2b0: ldo2 {
+			regulator-name = "vreg_l2b0";
 			regulator-min-microvolt = <1804000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l7b_e0_2p79: ldo7 {
-			regulator-name = "vreg_l7b_e0_2p79";
+		vreg_l7b0: ldo7 {
+			regulator-name = "vreg_l7b0";
 			regulator-min-microvolt = <2790000>;
 			regulator-max-microvolt = <2792000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l8b_e0_1p50: ldo8 {
-			regulator-name = "vreg_l8b_e0_1p50";
+		vreg_l8b0: ldo8 {
+			regulator-name = "vreg_l8b0";
 			regulator-min-microvolt = <1504000>;
 			regulator-max-microvolt = <1504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l9b_e0_2p9: ldo9 {
-			regulator-name = "vreg_l9b_e0_2p9";
+		vreg_l9b0: ldo9 {
+			regulator-name = "vreg_l9b0";
 			regulator-min-microvolt = <2960000>;
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l10b_e0_1p8: ldo10 {
-			regulator-name = "vreg_l10b_e0_1p8";
+		vreg_l10b0: ldo10 {
+			regulator-name = "vreg_l10b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l11b_e0_1p2: ldo11 {
-			regulator-name = "vreg_l11b_e0_1p2";
+		vreg_l11b0: ldo11 {
+			regulator-name = "vreg_l11b0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l12b_e0_1p14: ldo12 {
-			regulator-name = "vreg_l12b_e0_1p14";
+		vreg_l12b0: ldo12 {
+			regulator-name = "vreg_l12b0";
 			regulator-min-microvolt = <1144000>;
 			regulator-max-microvolt = <1144000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l15b_e0_1p8: ldo15 {
-			regulator-name = "vreg_l15b_e0_1p8";
+		vreg_l15b0: ldo15 {
+			regulator-name = "vreg_l15b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l17b_e0_2p4: ldo17 {
-			regulator-name = "vreg_l17b_e0_2p4";
+		vreg_l17b0: ldo17 {
+			regulator-name = "vreg_l17b0";
 			regulator-min-microvolt = <2400000>;
 			regulator-max-microvolt = <2700000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l18b_e0_1p2: ldo18 {
-			regulator-name = "vreg_l18b_e0_1p2";
+		vreg_l18b0: ldo18 {
+			regulator-name = "vreg_l18b0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -446,29 +446,29 @@ regulators-1 {
 		compatible = "qcom,pmcx0102-rpmh-regulators";
 		qcom,pmic-id = "C_E1";
 
-		vreg_l1c_e1_0p82: ldo1 {
-			regulator-name = "vreg_l1c_e1_0p82";
+		vreg_l1c1: ldo1 {
+			regulator-name = "vreg_l1c1";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2c_e1_1p14: ldo2 {
-			regulator-name = "vreg_l2c_e1_1p14";
+		vreg_l2c1: ldo2 {
+			regulator-name = "vreg_l2c1";
 			regulator-min-microvolt = <1144000>;
 			regulator-max-microvolt = <1144000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3c_e1_0p89: ldo3 {
-			regulator-name = "vreg_l3c_e1_0p89";
+		vreg_l3c1: ldo3 {
+			regulator-name = "vreg_l3c1";
 			regulator-min-microvolt = <890000>;
 			regulator-max-microvolt = <980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4c_e1_0p72: ldo4 {
-			regulator-name = "vreg_l4c_e1_0p72";
+		vreg_l4c1: ldo4 {
+			regulator-name = "vreg_l4c1";
 			regulator-min-microvolt = <720000>;
 			regulator-max-microvolt = <720000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -479,43 +479,43 @@ regulators-2 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "F_E0";
 
-		vreg_s7f_e0_1p32: smps7 {
-			regulator-name = "vreg_s7f_e0_1p32";
+		vreg_s7f0: smps7 {
+			regulator-name = "vreg_s7f0";
 			regulator-min-microvolt = <1320000>;
 			regulator-max-microvolt = <1352000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_s8f_e0_0p95: smps8 {
-			regulator-name = "vreg_s8f_e0_0p95";
+		vreg_s8f0: smps8 {
+			regulator-name = "vreg_s8f0";
 			regulator-min-microvolt = <952000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_s9f_e0_1p9: smps9 {
-			regulator-name = "vreg_s9f_e0_1p9";
+		vreg_s9f0: smps9 {
+			regulator-name = "vreg_s9f0";
 			regulator-min-microvolt = <1900000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2f_e0_0p82: ldo2 {
-			regulator-name = "vreg_l2f_e0_0p82";
+		vreg_l2f0: ldo2 {
+			regulator-name = "vreg_l2f0";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3f_e0_0p72: ldo3 {
-			regulator-name = "vreg_l3f_e0_0p72";
+		vreg_l3f0: ldo3 {
+			regulator-name = "vreg_l3f0";
 			regulator-min-microvolt = <720000>;
 			regulator-max-microvolt = <720000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4f_e0_0p3: ldo4 {
-			regulator-name = "vreg_l4f_e0_0p3";
+		vreg_l4f0: ldo4 {
+			regulator-name = "vreg_l4f0";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -526,29 +526,29 @@ regulators-3 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "F_E1";
 
-		vreg_s7f_e1_0p3: smps7 {
-			regulator-name = "vreg_s7f_e1_0p3";
+		vreg_s7f1: smps7 {
+			regulator-name = "vreg_s7f1";
 			regulator-min-microvolt = <300000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l1f_e1_0p82: ldo1 {
-			regulator-name = "vreg_l1f_e1_0p82";
+		vreg_l1f1: ldo1 {
+			regulator-name = "vreg_l1f1";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2f_e1_0p83: ldo2 {
-			regulator-name = "vreg_l2f_e1_0p83";
+		vreg_l2f1: ldo2 {
+			regulator-name = "vreg_l2f1";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4f_e1_1p08: ldo4 {
-			regulator-name = "vreg_l4f_e1_1p08";
+		vreg_l4f1: ldo4 {
+			regulator-name = "vreg_l4f1";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1320000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -559,29 +559,29 @@ regulators-4 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "H_E0";
 
-		vreg_l1h_e0_0p89: ldo1 {
-			regulator-name = "vreg_l1h_e0_0p89";
+		vreg_l1h0: ldo1 {
+			regulator-name = "vreg_l1h0";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2h_e0_0p72: ldo2 {
-			regulator-name = "vreg_l2h_e0_0p72";
+		vreg_l2h0: ldo2 {
+			regulator-name = "vreg_l2h0";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3h_e0_0p32: ldo3 {
-			regulator-name = "vreg_l3h_e0_0p32";
+		vreg_l3h0: ldo3 {
+			regulator-name = "vreg_l3h0";
 			regulator-min-microvolt = <320000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4h_e0_1p2: ldo4 {
-			regulator-name = "vreg_l4h_e0_1p2";
+		vreg_l4h0: ldo4 {
+			regulator-name = "vreg_l4h0";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1320000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -618,7 +618,7 @@ touchpad@2c {
 		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
 
 		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l15b_e0_1p8>;
+		vddl-supply = <&vreg_l15b0>;
 
 		pinctrl-0 = <&tpad_default>;
 		pinctrl-names = "default";
@@ -634,7 +634,7 @@ keyboard@3a {
 		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
 
 		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l15b_e0_1p8>;
+		vddl-supply = <&vreg_l15b0>;
 
 		pinctrl-0 = <&kybd_default>;
 		pinctrl-names = "default";
@@ -654,8 +654,8 @@ ptn3222_0: redriver@43 {
 
 		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
 
-		vdd3v3-supply = <&vreg_l8b_e0_1p50>;
-		vdd1v8-supply = <&vreg_l15b_e0_1p8>;
+		vdd3v3-supply = <&vreg_l8b0>;
+		vdd1v8-supply = <&vreg_l15b0>;
 
 		#phy-cells = <0>;
 	};
@@ -666,8 +666,8 @@ ptn3222_1: redriver@47 {
 
 		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
 
-		vdd3v3-supply = <&vreg_l8b_e0_1p50>;
-		vdd1v8-supply = <&vreg_l15b_e0_1p8>;
+		vdd3v3-supply = <&vreg_l8b0>;
+		vdd1v8-supply = <&vreg_l15b0>;
 
 		#phy-cells = <0>;
 	};
@@ -685,7 +685,7 @@ touchscreen@38 {
 		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
 
 		vcc33-supply = <&vreg_misc_3p3>;
-		vccio-supply = <&vreg_l15b_e0_1p8>;
+		vccio-supply = <&vreg_l15b0>;
 
 		reset-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
 
@@ -698,7 +698,7 @@ &lpass_vamacro {
 	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 	pinctrl-names = "default";
 	qcom,dmic-sample-rate = <4800000>;
-	vdd-micb-supply = <&vreg_l1b_e0_1p8>;
+	vdd-micb-supply = <&vreg_l1b0>;
 };
 
 &mdss {
@@ -736,8 +736,8 @@ &mdss_dp3_out {
 };
 
 &mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l2f_e1_0p83>;
-	vdda-pll-supply = <&vreg_l4f_e1_1p08>;
+	vdda-phy-supply = <&vreg_l2f1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -762,8 +762,8 @@ &pcie4 {
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l1c_e1_0p82>;
-	vdda-pll-supply = <&vreg_l4f_e1_1p08>;
+	vdda-phy-supply = <&vreg_l1c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -798,8 +798,8 @@ &pcie5 {
 };
 
 &pcie5_phy {
-	vdda-phy-supply = <&vreg_l2f_e0_0p82>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
+	vdda-phy-supply = <&vreg_l2f0>;
+	vdda-pll-supply = <&vreg_l4h0>;
 
 	status = "okay";
 };
@@ -819,8 +819,8 @@ &pcie6 {
 };
 
 &pcie6_phy {
-	vdda-phy-supply = <&vreg_l1c_e1_0p82>;
-	vdda-pll-supply = <&vreg_l4f_e1_1p08>;
+	vdda-phy-supply = <&vreg_l1c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -890,18 +890,18 @@ &remoteproc_cdsp {
 };
 
 &smb2370_j_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b_e0_1p8>;
-	vdd3-supply = <&vreg_l7b_e0_2p79>;
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
 };
 
 &smb2370_k_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b_e0_1p8>;
-	vdd3-supply = <&vreg_l7b_e0_2p79>;
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
 };
 
 &sdhc_2 {
-	vmmc-supply = <&vreg_l9b_e0_2p9>;
-	vqmmc-supply = <&vreg_l2b_e0_2p9>;
+	vmmc-supply = <&vreg_l9b0>;
+	vqmmc-supply = <&vreg_l2b0>;
 
 	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
 	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
@@ -925,8 +925,8 @@ left_woofer: speaker@0,0 {
 		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "WooferLeft";
-		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
-		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <1 2 3 7 12 14>;
 	};
 
@@ -937,8 +937,8 @@ left_tweeter: speaker@0,1 {
 		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TweeterLeft";
-		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
-		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <4 5 6 7 13 15>;
 	};
 };
@@ -953,8 +953,8 @@ right_woofer: speaker@0,0 {
 		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "WooferRight";
-		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
-		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <1 2 3 7 12 14>;
 	};
 
@@ -965,8 +965,8 @@ right_tweeter: speaker@0,1 {
 		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TweeterRight";
-		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
-		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <4 5 6 7 13 15>;
 	};
 };
@@ -1182,8 +1182,8 @@ &usb_0_dwc3_hs {
 };
 
 &usb_0_hsphy {
-	vdd-supply = <&vreg_l3f_e0_0p72>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l3f0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	phys = <&smb2370_j_e2_eusb2_repeater>;
 
@@ -1191,9 +1191,9 @@ &usb_0_hsphy {
 };
 
 &usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l3f_e0_0p72>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
-	refgen-supply = <&vreg_l2f_e0_0p82>;
+	vdda-phy-supply = <&vreg_l3f0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l2f0>;
 
 	status = "okay";
 };
@@ -1211,8 +1211,8 @@ &usb_1_dwc3_hs {
 };
 
 &usb_1_hsphy {
-	vdd-supply = <&vreg_l3f_e0_0p72>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l3f0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	phys = <&smb2370_k_e2_eusb2_repeater>;
 
@@ -1220,9 +1220,9 @@ &usb_1_hsphy {
 };
 
 &usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l1h_e0_0p89>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
-	refgen-supply = <&vreg_l2f_e0_0p82>;
+	vdda-phy-supply = <&vreg_l1h0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l2f0>;
 
 	status = "okay";
 };
@@ -1238,8 +1238,8 @@ &usb_hs {
 };
 
 &usb_hs_phy {
-	vdd-supply = <&vreg_l2h_e0_0p72>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l2h0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	phys = <&ptn3222_1>;
 
@@ -1251,8 +1251,8 @@ &usb_mp {
 };
 
 &usb_mp_hsphy0 {
-	vdd-supply = <&vreg_l2h_e0_0p72>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l2h0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	phys = <&ptn3222_0>;
 
@@ -1260,24 +1260,24 @@ &usb_mp_hsphy0 {
 };
 
 &usb_mp_hsphy1 {
-	vdd-supply = <&vreg_l2h_e0_0p72>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l2h0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	status = "okay";
 };
 
 &usb_mp_qmpphy0 {
-	vdda-phy-supply = <&vreg_l2h_e0_0p72>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
-	refgen-supply = <&vreg_l4f_e1_1p08>;
+	vdda-phy-supply = <&vreg_l2h0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
 
 &usb_mp_qmpphy1 {
-	vdda-phy-supply = <&vreg_l2h_e0_0p72>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
-	refgen-supply = <&vreg_l4f_e1_1p08>;
+	vdda-phy-supply = <&vreg_l2h0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts b/arch/arm64/boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts
index 096d40e49210..ef77e70c8af3 100644
--- a/arch/arm64/boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts
@@ -236,11 +236,11 @@ wcn7850-pmu {
 		compatible = "qcom,wcn7850-pmu";
 
 		vdd-supply = <&vreg_wcn_0p95>;
-		vddio-supply = <&vreg_l15b_e0_1p8>;
-		vddaon-supply = <&vreg_l15b_e0_1p8>;
-		vdddig-supply = <&vreg_l15b_e0_1p8>;
-		vddrfa1p2-supply = <&vreg_l15b_e0_1p8>;
-		vddrfa1p8-supply = <&vreg_l15b_e0_1p8>;
+		vddio-supply = <&vreg_l15b0>;
+		vddaon-supply = <&vreg_l15b0>;
+		vdddig-supply = <&vreg_l15b0>;
+		vddrfa1p2-supply = <&vreg_l15b0>;
+		vddrfa1p8-supply = <&vreg_l15b0>;
 
 		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
 		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
@@ -297,29 +297,29 @@ regulators-0 {
 		compatible = "qcom,pmh0101-rpmh-regulators";
 		qcom,pmic-id = "B_E0";
 
-		vreg_l1b_e0_1p8: ldo1 {
-			regulator-name = "vreg_l1b_e0_1p8";
+		vreg_l1b0: ldo1 {
+			regulator-name = "vreg_l1b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l7b_e0_3p1: ldo7 {
-			regulator-name = "vreg_l7b_e0_3p1";
+		vreg_l7b0: ldo7 {
+			regulator-name = "vreg_l7b0";
 			regulator-min-microvolt = <3072000>;
 			regulator-max-microvolt = <3072000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l15b_e0_1p8: ldo15 {
-			regulator-name = "vreg_l15b_e0_1p8";
+		vreg_l15b0: ldo15 {
+			regulator-name = "vreg_l15b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l18b_e0_1p2: ldo18 {
-			regulator-name = "vreg_l18b_e0_1p2";
+		vreg_l18b0: ldo18 {
+			regulator-name = "vreg_l18b0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -330,8 +330,8 @@ regulators-1 {
 		compatible = "qcom,pmcx0102-rpmh-regulators";
 		qcom,pmic-id = "C_E1";
 
-		vreg_l1c_e1_0p91: ldo1 {
-			regulator-name = "vreg_l1c_e1_0p91";
+		vreg_l1c1: ldo1 {
+			regulator-name = "vreg_l1c1";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -342,15 +342,15 @@ regulators-2 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "F_E0";
 
-		vreg_l2f_e0_0p94: ldo2 {
-			regulator-name = "vreg_l2f_e0_0p94";
+		vreg_l2f0: ldo2 {
+			regulator-name = "vreg_l2f0";
 			regulator-min-microvolt = <936000>;
 			regulator-max-microvolt = <936000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3f_e0_0p91: ldo3 {
-			regulator-name = "vreg_l3f_e0_0p91";
+		vreg_l3f0: ldo3 {
+			regulator-name = "vreg_l3f0";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -361,22 +361,22 @@ regulators-3 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "F_E1";
 
-		vreg_l1f_e1_0p88: ldo1 {
-			regulator-name = "vreg_l1f_e1_0p88";
+		vreg_l1f1: ldo1 {
+			regulator-name = "vreg_l1f1";
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2f_e1_0p88: ldo2 {
-			regulator-name = "vreg_l2f_e1_0p88";
+		vreg_l2f1: ldo2 {
+			regulator-name = "vreg_l2f1";
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4f_e1_1p2: ldo4 {
-			regulator-name = "vreg_l4f_e1_1p2";
+		vreg_l4f1: ldo4 {
+			regulator-name = "vreg_l4f1";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -387,22 +387,22 @@ regulators-4 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "H_E0";
 
-		vreg_l1h_e0_0p94: ldo1 {
-			regulator-name = "vreg_l1h_e0_0p94";
+		vreg_l1h0: ldo1 {
+			regulator-name = "vreg_l1h0";
 			regulator-min-microvolt = <936000>;
 			regulator-max-microvolt = <936000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2h_e0_0p88: ldo2 {
-			regulator-name = "vreg_l2h_e0_0p88";
+		vreg_l2h0: ldo2 {
+			regulator-name = "vreg_l2h0";
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4h_e0_1p2: ldo4 {
-			regulator-name = "vreg_l4h_e0_1p2";
+		vreg_l4h0: ldo4 {
+			regulator-name = "vreg_l4h0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -470,7 +470,7 @@ touchscreen@10 {
 };
 
 &lpass_vamacro {
-	vdd-micb-supply = <&vreg_l1b_e0_1p8>;
+	vdd-micb-supply = <&vreg_l1b0>;
 
 	pinctrl-0 = <&dmic01_default>;
 	pinctrl-names = "default";
@@ -529,8 +529,8 @@ &mdss_dp3_out {
 };
 
 &mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l2f_e1_0p88>;
-	vdda-pll-supply = <&vreg_l4f_e1_1p2>;
+	vdda-phy-supply = <&vreg_l2f1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -543,8 +543,8 @@ &pcie4 {
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l1c_e1_0p91>;
-	vdda-pll-supply = <&vreg_l4f_e1_1p2>;
+	vdda-phy-supply = <&vreg_l1c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -579,8 +579,8 @@ &pcie5 {
 };
 
 &pcie5_phy {
-	vdda-phy-supply = <&vreg_l2f_e0_0p94>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
+	vdda-phy-supply = <&vreg_l2f0>;
+	vdda-pll-supply = <&vreg_l4h0>;
 
 	status = "okay";
 };
@@ -625,13 +625,13 @@ &remoteproc_soccp {
 };
 
 &smb2370_j_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b_e0_1p8>;
-	vdd3-supply = <&vreg_l7b_e0_3p1>;
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
 };
 
 &smb2370_k_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b_e0_1p8>;
-	vdd3-supply = <&vreg_l7b_e0_3p1>;
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
 };
 
 &swr0 {
@@ -644,8 +644,8 @@ left_woofer: speaker@0,0 {
 		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "WooferLeft";
-		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
-		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <1 2 3 7 12 14>;
 	};
 
@@ -656,8 +656,8 @@ left_tweeter: speaker@0,1 {
 		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TweeterLeft";
-		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
-		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <4 5 6 7 13 15>;
 	};
 };
@@ -672,8 +672,8 @@ right_woofer: speaker@0,0 {
 		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "WooferRight";
-		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
-		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <1 2 3 7 12 14>;
 	};
 
@@ -684,30 +684,30 @@ right_tweeter: speaker@0,1 {
 		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TweeterRight";
-		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
-		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <4 5 6 7 13 15>;
 	};
 };
 
 &tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f_e1_0p88>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f_e1_0p88>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f_e1_0p88>;
-	vdda-qrefrpt3-0p9-supply = <&vreg_l2h_e0_0p88>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2h_e0_0p88>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f_e1_0p88>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f_e1_0p88>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f_e1_0p88>;
-	vdda-qrefrx4-0p9-supply = <&vreg_l2h_e0_0p88>;
-	vdda-qrefrx5-0p9-supply = <&vreg_l3f_e0_0p91>;
-	vdda-qreftx0-0p9-supply = <&vreg_l3f_e0_0p91>;
-	vdda-qreftx0-1p2-supply = <&vreg_l4h_e0_1p2>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f_e1_0p88>;
-	vdda-refgen3-0p9-supply = <&vreg_l2f_e0_0p94>;
-	vdda-refgen3-1p2-supply = <&vreg_l4h_e0_1p2>;
-	vdda-refgen4-0p9-supply = <&vreg_l1f_e1_0p88>;
-	vdda-refgen4-1p2-supply = <&vreg_l4f_e1_1p2>;
+	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
+	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
+	vdda-refgen3-1p2-supply = <&vreg_l4h0>;
+	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
 };
 
 &tlmm {
@@ -841,8 +841,8 @@ &usb_0_dwc3_hs {
 };
 
 &usb_0_hsphy {
-	vdd-supply = <&vreg_l3f_e0_0p91>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l3f0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	phys = <&smb2370_j_e2_eusb2_repeater>;
 
@@ -850,9 +850,9 @@ &usb_0_hsphy {
 };
 
 &usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l3f_e0_0p91>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
-	refgen-supply = <&vreg_l2f_e0_0p94>;
+	vdda-phy-supply = <&vreg_l3f0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l2f0>;
 
 	status = "okay";
 };
@@ -870,8 +870,8 @@ &usb_1_dwc3_hs {
 };
 
 &usb_1_hsphy {
-	vdd-supply = <&vreg_l3f_e0_0p91>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l3f0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	phys = <&smb2370_k_e2_eusb2_repeater>;
 
@@ -879,9 +879,9 @@ &usb_1_hsphy {
 };
 
 &usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l1h_e0_0p94>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
-	refgen-supply = <&vreg_l2f_e0_0p94>;
+	vdda-phy-supply = <&vreg_l1h0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l2f0>;
 
 	status = "okay";
 };
@@ -898,8 +898,8 @@ &usb_hs {
 };
 
 &usb_hs_phy {
-	vdd-supply = <&vreg_l2h_e0_0p88>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l2h0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	status = "okay";
 };
@@ -910,31 +910,31 @@ &usb_mp {
 };
 
 &usb_mp_hsphy0 {
-	vdd-supply = <&vreg_l2h_e0_0p88>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l2h0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	status = "okay";
 };
 
 &usb_mp_hsphy1 {
-	vdd-supply = <&vreg_l2h_e0_0p88>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l2h0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	status = "okay";
 };
 
 &usb_mp_qmpphy0 {
-	vdda-phy-supply = <&vreg_l2h_e0_0p88>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
-	refgen-supply = <&vreg_l4f_e1_1p2>;
+	vdda-phy-supply = <&vreg_l2h0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
 
 &usb_mp_qmpphy1 {
-	vdda-phy-supply = <&vreg_l2h_e0_0p88>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
-	refgen-supply = <&vreg_l4f_e1_1p2>;
+	vdda-phy-supply = <&vreg_l2h0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts
index 769f195c99d9..56c22daab056 100644
--- a/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts
@@ -320,11 +320,11 @@ wcn7850-pmu {
 		compatible = "qcom,wcn7850-pmu";
 
 		vdd-supply = <&vreg_wcn_0p95>;
-		vddio-supply = <&vreg_l15b_e0>;
-		vddaon-supply = <&vreg_l15b_e0>;
-		vdddig-supply = <&vreg_l15b_e0>;
-		vddrfa1p2-supply = <&vreg_l15b_e0>;
-		vddrfa1p8-supply = <&vreg_l15b_e0>;
+		vddio-supply = <&vreg_l15b0>;
+		vddaon-supply = <&vreg_l15b0>;
+		vdddig-supply = <&vreg_l15b0>;
+		vddrfa1p2-supply = <&vreg_l15b0>;
+		vddrfa1p8-supply = <&vreg_l15b0>;
 
 		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
 		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
@@ -381,71 +381,71 @@ regulators-0 {
 		compatible = "qcom,pmh0101-rpmh-regulators";
 		qcom,pmic-id = "B_E0";
 
-		vreg_l1b_e0: ldo1 {
-			regulator-name = "vreg_l1b_e0";
+		vreg_l1b0: ldo1 {
+			regulator-name = "vreg_l1b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l7b_e0: ldo7 {
-			regulator-name = "vreg_l7b_e0";
+		vreg_l7b0: ldo7 {
+			regulator-name = "vreg_l7b0";
 			regulator-min-microvolt = <3072000>;
 			regulator-max-microvolt = <3072000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l8b_e0: ldo8 {
-			regulator-name = "vreg_l8b_e0";
+		vreg_l8b0: ldo8 {
+			regulator-name = "vreg_l8b0";
 			regulator-min-microvolt = <3304000>;
 			regulator-max-microvolt = <3304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l9b_e0: ldo9 {
-			regulator-name = "vreg_l9b_e0";
+		vreg_l9b0: ldo9 {
+			regulator-name = "vreg_l9b0";
 			regulator-min-microvolt = <2960000>;
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l10b_e0: ldo10 {
-			regulator-name = "vreg_l10b_e0";
+		vreg_l10b0: ldo10 {
+			regulator-name = "vreg_l10b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l11b_e0: ldo11 {
-			regulator-name = "vreg_l11b_e0";
+		vreg_l11b0: ldo11 {
+			regulator-name = "vreg_l11b0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l12b_e0: ldo12 {
-			regulator-name = "vreg_l12b_e0";
+		vreg_l12b0: ldo12 {
+			regulator-name = "vreg_l12b0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l15b_e0: ldo15 {
-			regulator-name = "vreg_l15b_e0";
+		vreg_l15b0: ldo15 {
+			regulator-name = "vreg_l15b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l17b_e0: ldo17 {
-			regulator-name = "vreg_l17b_e0";
+		vreg_l17b0: ldo17 {
+			regulator-name = "vreg_l17b0";
 			regulator-min-microvolt = <2504000>;
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l18b_e0: ldo18 {
-			regulator-name = "vreg_l18b_e0";
+		vreg_l18b0: ldo18 {
+			regulator-name = "vreg_l18b0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -456,29 +456,29 @@ regulators-1 {
 		compatible = "qcom,pmcx0102-rpmh-regulators";
 		qcom,pmic-id = "C_E1";
 
-		vreg_l1c_e1: ldo1 {
-			regulator-name = "vreg_l1c_e1";
+		vreg_l1c1: ldo1 {
+			regulator-name = "vreg_l1c1";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2c_e1: ldo2 {
-			regulator-name = "vreg_l2c_e1";
+		vreg_l2c1: ldo2 {
+			regulator-name = "vreg_l2c1";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3c_e1: ldo3 {
-			regulator-name = "vreg_l3c_e1";
+		vreg_l3c1: ldo3 {
+			regulator-name = "vreg_l3c1";
 			regulator-min-microvolt = <936000>;
 			regulator-max-microvolt = <936000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4c_e1: ldo4 {
-			regulator-name = "vreg_l4c_e1";
+		vreg_l4c1: ldo4 {
+			regulator-name = "vreg_l4c1";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -489,29 +489,29 @@ regulators-2 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "F_E0";
 
-		vreg_s7f_e0: smps7 {
-			regulator-name = "vreg_s7f_e0";
+		vreg_s7f0: smps7 {
+			regulator-name = "vreg_s7f0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_s8f_e0: smps8 {
-			regulator-name = "vreg_s8f_e0";
+		vreg_s8f0: smps8 {
+			regulator-name = "vreg_s8f0";
 			regulator-min-microvolt = <952000>;
 			regulator-max-microvolt = <952000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2f_e0: ldo2 {
-			regulator-name = "vreg_l2f_e0";
+		vreg_l2f0: ldo2 {
+			regulator-name = "vreg_l2f0";
 			regulator-min-microvolt = <936000>;
 			regulator-max-microvolt = <936000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3f_e0: ldo3 {
-			regulator-name = "vreg_l3f_e0";
+		vreg_l3f0: ldo3 {
+			regulator-name = "vreg_l3f0";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -522,22 +522,22 @@ regulators-3 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "F_E1";
 
-		vreg_l1f_e1: ldo1 {
-			regulator-name = "vreg_l1f_e1";
+		vreg_l1f1: ldo1 {
+			regulator-name = "vreg_l1f1";
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2f_e1: ldo2 {
-			regulator-name = "vreg_l2f_e1";
+		vreg_l2f1: ldo2 {
+			regulator-name = "vreg_l2f1";
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4f_e1: ldo4 {
-			regulator-name = "vreg_l4f_e1";
+		vreg_l4f1: ldo4 {
+			regulator-name = "vreg_l4f1";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -548,29 +548,29 @@ regulators-4 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "H_E0";
 
-		vreg_l1h_e0: ldo1 {
-			regulator-name = "vreg_l1h_e0";
+		vreg_l1h0: ldo1 {
+			regulator-name = "vreg_l1h0";
 			regulator-min-microvolt = <936000>;
 			regulator-max-microvolt = <936000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2h_e0: ldo2 {
-			regulator-name = "vreg_l2h_e0";
+		vreg_l2h0: ldo2 {
+			regulator-name = "vreg_l2h0";
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3h_e0: ldo3 {
-			regulator-name = "vreg_l3h_e0";
+		vreg_l3h0: ldo3 {
+			regulator-name = "vreg_l3h0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4h_e0: ldo4 {
-			regulator-name = "vreg_l4h_e0";
+		vreg_l4h0: ldo4 {
+			regulator-name = "vreg_l4h0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -599,7 +599,7 @@ touchpad@2c {
 		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
 
 		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l15b_e0>;
+		vddl-supply = <&vreg_l15b0>;
 
 		pinctrl-0 = <&tpad_default>;
 		pinctrl-names = "default";
@@ -615,7 +615,7 @@ keyboard@3a {
 		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
 
 		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l15b_e0>;
+		vddl-supply = <&vreg_l15b0>;
 
 		pinctrl-0 = <&kybd_default>;
 		pinctrl-names = "default";
@@ -647,7 +647,7 @@ touchscreen@14 {
 		post-power-on-delay-ms = <200>;
 
 		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l15b_e0>;
+		vddl-supply = <&vreg_l15b0>;
 
 		pinctrl-0 = <&ts0_default>;
 		pinctrl-names = "default";
@@ -727,8 +727,8 @@ &mdss_dp3_out {
 };
 
 &mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l2f_e1>;
-	vdda-pll-supply = <&vreg_l4f_e1>;
+	vdda-phy-supply = <&vreg_l2f1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -741,8 +741,8 @@ &pcie4 {
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l1c_e1>;
-	vdda-pll-supply = <&vreg_l4f_e1>;
+	vdda-phy-supply = <&vreg_l1c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -777,8 +777,8 @@ &pcie5 {
 };
 
 &pcie5_phy {
-	vdda-phy-supply = <&vreg_l2f_e0>;
-	vdda-pll-supply = <&vreg_l4h_e0>;
+	vdda-phy-supply = <&vreg_l2f0>;
+	vdda-pll-supply = <&vreg_l4h0>;
 
 	status = "okay";
 };
@@ -798,8 +798,8 @@ &pcie6 {
 };
 
 &pcie6_phy {
-	vdda-phy-supply = <&vreg_l1c_e1>;
-	vdda-pll-supply = <&vreg_l4f_e1>;
+	vdda-phy-supply = <&vreg_l1c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -861,18 +861,18 @@ &remoteproc_soccp {
 };
 
 &smb2370_j_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b_e0>;
-	vdd3-supply = <&vreg_l7b_e0>;
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
 };
 
 &smb2370_k_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b_e0>;
-	vdd3-supply = <&vreg_l7b_e0>;
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
 };
 
 &smb2370_l_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b_e0>;
-	vdd3-supply = <&vreg_l7b_e0>;
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
 
 	status = "okay";
 };
@@ -887,8 +887,8 @@ left_woofer: speaker@0,0 {
 		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "WooferLeft";
-		vdd-1p8-supply = <&vreg_l15b_e0>;
-		vdd-io-supply = <&vreg_l18b_e0>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <1 2 3 7 12 14>;
 	};
 
@@ -899,8 +899,8 @@ left_tweeter: speaker@0,1 {
 		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TweeterLeft";
-		vdd-1p8-supply = <&vreg_l15b_e0>;
-		vdd-io-supply = <&vreg_l18b_e0>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <4 5 6 7 13 15>;
 	};
 };
@@ -915,8 +915,8 @@ right_woofer: speaker@0,0 {
 		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "WooferRight";
-		vdd-1p8-supply = <&vreg_l15b_e0>;
-		vdd-io-supply = <&vreg_l18b_e0>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <1 2 3 7 12 14>;
 	};
 
@@ -927,30 +927,30 @@ right_tweeter: speaker@0,1 {
 		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TweeterRight";
-		vdd-1p8-supply = <&vreg_l15b_e0>;
-		vdd-io-supply = <&vreg_l18b_e0>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <4 5 6 7 13 15>;
 	};
 };
 
 &tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f_e1>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f_e1>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f_e1>;
-	vdda-qrefrpt3-0p9-supply = <&vreg_l2h_e0>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2h_e0>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f_e1>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f_e1>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f_e1>;
-	vdda-qrefrx4-0p9-supply = <&vreg_l2h_e0>;
-	vdda-qrefrx5-0p9-supply = <&vreg_l3f_e0>;
-	vdda-qreftx0-0p9-supply = <&vreg_l3f_e0>;
-	vdda-qreftx0-1p2-supply = <&vreg_l4h_e0>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f_e1>;
-	vdda-refgen3-0p9-supply = <&vreg_l2f_e0>;
-	vdda-refgen3-1p2-supply = <&vreg_l4h_e0>;
-	vdda-refgen4-0p9-supply = <&vreg_l1f_e1>;
-	vdda-refgen4-1p2-supply = <&vreg_l4f_e1>;
+	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
+	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
+	vdda-refgen3-1p2-supply = <&vreg_l4h0>;
+	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
 };
 
 &tlmm {
@@ -1142,8 +1142,8 @@ &usb_0_dwc3_hs {
 };
 
 &usb_0_hsphy {
-	vdd-supply = <&vreg_l3f_e0>;
-	vdda12-supply = <&vreg_l4h_e0>;
+	vdd-supply = <&vreg_l3f0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	phys = <&smb2370_j_e2_eusb2_repeater>;
 
@@ -1151,9 +1151,9 @@ &usb_0_hsphy {
 };
 
 &usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l4h_e0>;
-	vdda-pll-supply = <&vreg_l3f_e0>;
-	refgen-supply = <&vreg_l2f_e0>;
+	vdda-phy-supply = <&vreg_l4h0>;
+	vdda-pll-supply = <&vreg_l3f0>;
+	refgen-supply = <&vreg_l2f0>;
 
 	status = "okay";
 };
@@ -1171,8 +1171,8 @@ &usb_1_dwc3_hs {
 };
 
 &usb_1_hsphy {
-	vdd-supply = <&vreg_l3f_e0>;
-	vdda12-supply = <&vreg_l4h_e0>;
+	vdd-supply = <&vreg_l3f0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	phys = <&smb2370_k_e2_eusb2_repeater>;
 
@@ -1180,9 +1180,9 @@ &usb_1_hsphy {
 };
 
 &usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l4h_e0>;
-	vdda-pll-supply = <&vreg_l1h_e0>;
-	refgen-supply = <&vreg_l2f_e0>;
+	vdda-phy-supply = <&vreg_l4h0>;
+	vdda-pll-supply = <&vreg_l1h0>;
+	refgen-supply = <&vreg_l2f0>;
 
 	status = "okay";
 };
@@ -1200,8 +1200,8 @@ &usb_2_dwc3_hs {
 };
 
 &usb_2_hsphy {
-	vdd-supply = <&vreg_l4c_e1>;
-	vdda12-supply = <&vreg_l4f_e1>;
+	vdd-supply = <&vreg_l4c1>;
+	vdda12-supply = <&vreg_l4f1>;
 
 	phys = <&smb2370_l_e2_eusb2_repeater>;
 
@@ -1209,9 +1209,9 @@ &usb_2_hsphy {
 };
 
 &usb_2_qmpphy {
-	vdda-phy-supply = <&vreg_l4f_e1>;
-	vdda-pll-supply = <&vreg_l4c_e1>;
-	refgen-supply = <&vreg_l1c_e1>;
+	vdda-phy-supply = <&vreg_l4f1>;
+	vdda-pll-supply = <&vreg_l4c1>;
+	refgen-supply = <&vreg_l1c1>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/glymur-qcb.dts b/arch/arm64/boot/dts/qcom/glymur-qcb.dts
index 17d8ff3aed23..3255ad66786e 100644
--- a/arch/arm64/boot/dts/qcom/glymur-qcb.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-qcb.dts
@@ -122,11 +122,11 @@ wcn7850-pmu {
 		compatible = "qcom,wcn7850-pmu";
 
 		vdd-supply = <&vreg_wcn_0p95>;
-		vddio-supply = <&vreg_l15b_e0_1p8>;
-		vddaon-supply = <&vreg_l15b_e0_1p8>;
-		vdddig-supply = <&vreg_l15b_e0_1p8>;
-		vddrfa1p2-supply = <&vreg_l15b_e0_1p8>;
-		vddrfa1p8-supply = <&vreg_l15b_e0_1p8>;
+		vddio-supply = <&vreg_l15b0>;
+		vddaon-supply = <&vreg_l15b0>;
+		vdddig-supply = <&vreg_l15b0>;
+		vddrfa1p2-supply = <&vreg_l15b0>;
+		vddrfa1p8-supply = <&vreg_l15b0>;
 
 		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
 		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
@@ -197,78 +197,78 @@ vreg_bob2_e0: bob2 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 		};
 
-		vreg_l1b_e0_1p8: ldo1 {
-			regulator-name = "vreg_l1b_e0_1p8";
+		vreg_l1b0: ldo1 {
+			regulator-name = "vreg_l1b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2b_e0_2p9: ldo2 {
-			regulator-name = "vreg_l2b_e0_2p9";
+		vreg_l2b0: ldo2 {
+			regulator-name = "vreg_l2b0";
 			regulator-min-microvolt = <2904000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l7b_e0_2p79: ldo7 {
-			regulator-name = "vreg_l7b_e0_2p79";
+		vreg_l7b0: ldo7 {
+			regulator-name = "vreg_l7b0";
 			regulator-min-microvolt = <2790000>;
 			regulator-max-microvolt = <2792000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l8b_e0_1p50: ldo8 {
-			regulator-name = "vreg_l8b_e0_1p50";
+		vreg_l8b0: ldo8 {
+			regulator-name = "vreg_l8b0";
 			regulator-min-microvolt = <1504000>;
 			regulator-max-microvolt = <1504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l9b_e0_2p7: ldo9 {
-			regulator-name = "vreg_l9b_e0_2p7";
+		vreg_l9b0: ldo9 {
+			regulator-name = "vreg_l9b0";
 			regulator-min-microvolt = <2704000>;
 			regulator-max-microvolt = <2704000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l10b_e0_1p8: ldo10 {
-			regulator-name = "vreg_l10b_e0_1p8";
+		vreg_l10b0: ldo10 {
+			regulator-name = "vreg_l10b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l11b_e0_1p2: ldo11 {
-			regulator-name = "vreg_l11b_e0_1p2";
+		vreg_l11b0: ldo11 {
+			regulator-name = "vreg_l11b0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l12b_e0_1p14: ldo12 {
-			regulator-name = "vreg_l12b_e0_1p14";
+		vreg_l12b0: ldo12 {
+			regulator-name = "vreg_l12b0";
 			regulator-min-microvolt = <1144000>;
 			regulator-max-microvolt = <1144000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l15b_e0_1p8: ldo15 {
-			regulator-name = "vreg_l15b_e0_1p8";
+		vreg_l15b0: ldo15 {
+			regulator-name = "vreg_l15b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l17b_e0_2p4: ldo17 {
-			regulator-name = "vreg_l17b_e0_2p4";
+		vreg_l17b0: ldo17 {
+			regulator-name = "vreg_l17b0";
 			regulator-min-microvolt = <2400000>;
 			regulator-max-microvolt = <2700000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l18b_e0_1p2: ldo18 {
-			regulator-name = "vreg_l18b_e0_1p2";
+		vreg_l18b0: ldo18 {
+			regulator-name = "vreg_l18b0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -279,29 +279,29 @@ regulators-1 {
 		compatible = "qcom,pmcx0102-rpmh-regulators";
 		qcom,pmic-id = "C_E1";
 
-		vreg_l1c_e1_0p82: ldo1 {
-			regulator-name = "vreg_l1c_e1_0p82";
+		vreg_l1c1: ldo1 {
+			regulator-name = "vreg_l1c1";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2c_e1_1p14: ldo2 {
-			regulator-name = "vreg_l2c_e1_1p14";
+		vreg_l2c1: ldo2 {
+			regulator-name = "vreg_l2c1";
 			regulator-min-microvolt = <1144000>;
 			regulator-max-microvolt = <1144000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3c_e1_0p89: ldo3 {
-			regulator-name = "vreg_l3c_e1_0p89";
+		vreg_l3c1: ldo3 {
+			regulator-name = "vreg_l3c1";
 			regulator-min-microvolt = <890000>;
 			regulator-max-microvolt = <980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4c_e1_0p72: ldo4 {
-			regulator-name = "vreg_l4c_e1_0p72";
+		vreg_l4c1: ldo4 {
+			regulator-name = "vreg_l4c1";
 			regulator-min-microvolt = <720000>;
 			regulator-max-microvolt = <720000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -312,43 +312,43 @@ regulators-2 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "F_E0";
 
-		vreg_s7f_e0_1p32: smps7 {
-			regulator-name = "vreg_s7f_e0_1p32";
+		vreg_s7f0: smps7 {
+			regulator-name = "vreg_s7f0";
 			regulator-min-microvolt = <1320000>;
 			regulator-max-microvolt = <1352000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_s8f_e0_0p95: smps8 {
-			regulator-name = "vreg_s8f_e0_0p95";
+		vreg_s8f0: smps8 {
+			regulator-name = "vreg_s8f0";
 			regulator-min-microvolt = <952000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_s9f_e0_1p9: smps9 {
-			regulator-name = "vreg_s9f_e0_1p9";
+		vreg_s9f0: smps9 {
+			regulator-name = "vreg_s9f0";
 			regulator-min-microvolt = <1900000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2f_e0_0p82: ldo2 {
-			regulator-name = "vreg_l2f_e0_0p82";
+		vreg_l2f0: ldo2 {
+			regulator-name = "vreg_l2f0";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3f_e0_0p72: ldo3 {
-			regulator-name = "vreg_l3f_e0_0p72";
+		vreg_l3f0: ldo3 {
+			regulator-name = "vreg_l3f0";
 			regulator-min-microvolt = <720000>;
 			regulator-max-microvolt = <720000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4f_e0_1p08: ldo4 {
-			regulator-name = "vreg_l4f_e0_1p08";
+		vreg_l4f0: ldo4 {
+			regulator-name = "vreg_l4f0";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -359,29 +359,29 @@ regulators-3 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "F_E1";
 
-		vreg_s7f_e1_0p3: smps7 {
-			regulator-name = "vreg_s7f_e1_0p3";
+		vreg_s7f1: smps7 {
+			regulator-name = "vreg_s7f1";
 			regulator-min-microvolt = <300000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l1f_e1_0p82: ldo1 {
-			regulator-name = "vreg_l1f_e1_0p82";
+		vreg_l1f1: ldo1 {
+			regulator-name = "vreg_l1f1";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2f_e1_0p83: ldo2 {
-			regulator-name = "vreg_l2f_e1_0p83";
+		vreg_l2f1: ldo2 {
+			regulator-name = "vreg_l2f1";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4f_e1_1p08: ldo4 {
-			regulator-name = "vreg_l4f_e1_1p08";
+		vreg_l4f1: ldo4 {
+			regulator-name = "vreg_l4f1";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1320000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -392,29 +392,29 @@ regulators-4 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "H_E0";
 
-		vreg_l1h_e0_0p89: ldo1 {
-			regulator-name = "vreg_l1h_e0_0p89";
+		vreg_l1h0: ldo1 {
+			regulator-name = "vreg_l1h0";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2h_e0_0p72: ldo2 {
-			regulator-name = "vreg_l2h_e0_0p72";
+		vreg_l2h0: ldo2 {
+			regulator-name = "vreg_l2h0";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3h_e0_0p32: ldo3 {
-			regulator-name = "vreg_l3h_e0_0p32";
+		vreg_l3h0: ldo3 {
+			regulator-name = "vreg_l3h0";
 			regulator-min-microvolt = <320000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4h_e0_1p2: ldo4 {
-			regulator-name = "vreg_l4h_e0_1p2";
+		vreg_l4h0: ldo4 {
+			regulator-name = "vreg_l4h0";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1320000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -446,8 +446,8 @@ &pcie4 {
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l1c_e1_0p82>;
-	vdda-pll-supply = <&vreg_l4f_e1_1p08>;
+	vdda-phy-supply = <&vreg_l1c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -482,8 +482,8 @@ &pcie5 {
 };
 
 &pcie5_phy {
-	vdda-phy-supply = <&vreg_l2f_e0_0p82>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
+	vdda-phy-supply = <&vreg_l2f0>;
+	vdda-pll-supply = <&vreg_l4h0>;
 
 	status = "okay";
 };
@@ -503,8 +503,8 @@ &pcie6 {
 };
 
 &pcie6_phy {
-	vdda-phy-supply = <&vreg_l1c_e1_0p82>;
-	vdda-pll-supply = <&vreg_l4f_e1_1p08>;
+	vdda-phy-supply = <&vreg_l1c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -560,23 +560,23 @@ &remoteproc_soccp {
 };
 
 &tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrpt3-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrx4-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qrefrx5-0p9-supply = <&vreg_l3f_e0_0p72>;
-	vdda-qreftx0-0p9-supply = <&vreg_l3f_e0_0p72>;
-	vdda-qreftx0-1p2-supply = <&vreg_l4h_e0_1p2>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f_e1_0p82>;
-	vdda-refgen3-0p9-supply = <&vreg_l2f_e0_0p82>;
-	vdda-refgen3-1p2-supply = <&vreg_l4h_e0_1p2>;
-	vdda-refgen4-0p9-supply = <&vreg_l1f_e1_0p82>;
-	vdda-refgen4-1p2-supply = <&vreg_l4f_e1_1p08>;
+	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
+	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
+	vdda-refgen3-1p2-supply = <&vreg_l4h0>;
+	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
 };
 
 &tlmm {
diff --git a/arch/arm64/boot/dts/qcom/mahua-crd.dts b/arch/arm64/boot/dts/qcom/mahua-crd.dts
index 17e40f2a6259..51708954f17a 100644
--- a/arch/arm64/boot/dts/qcom/mahua-crd.dts
+++ b/arch/arm64/boot/dts/qcom/mahua-crd.dts
@@ -21,22 +21,22 @@ / {
 };
 
 &pcie3b_phy {
-	vdda-phy-supply = <&vreg_l3c_e1_0p89>;
-	vdda-pll-supply = <&vreg_l2c_e1_1p14>;
+	vdda-phy-supply = <&vreg_l3c1>;
+	vdda-pll-supply = <&vreg_l2c1>;
 };
 
 &tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrpt3-0p9-supply = <&vreg_l1f_e1_0p82>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qrefrpt5-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f_e1_0p83>;
-	vdda-qrefrx3-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f_e1_0p82>;
-	vdda-refgen3-0p9-supply = <&vreg_l1f_e1_0p82>;
-	vdda-refgen3-1p2-supply = <&vreg_l4f_e1_1p08>;
+	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt3-0p9-supply = <&vreg_l1f1>;
+	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrpt5-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx3-0p9-supply = <&vreg_l2h0>;
+	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen3-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen3-1p2-supply = <&vreg_l4f1>;
 };
diff --git a/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts b/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts
index 26d6d8285e04..860e9ef01aa6 100644
--- a/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts
+++ b/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts
@@ -332,11 +332,11 @@ wcn7850-pmu {
 		compatible = "qcom,wcn7850-pmu";
 
 		vdd-supply = <&vreg_wcn_0p95>;
-		vddio-supply = <&vreg_l15b_e0_1p8>;
-		vddaon-supply = <&vreg_l15b_e0_1p8>;
-		vdddig-supply = <&vreg_l15b_e0_1p8>;
-		vddrfa1p2-supply = <&vreg_l15b_e0_1p8>;
-		vddrfa1p8-supply = <&vreg_l15b_e0_1p8>;
+		vddio-supply = <&vreg_l15b0>;
+		vddaon-supply = <&vreg_l15b0>;
+		vdddig-supply = <&vreg_l15b0>;
+		vddrfa1p2-supply = <&vreg_l15b0>;
+		vddrfa1p8-supply = <&vreg_l15b0>;
 
 		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
 		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
@@ -407,79 +407,79 @@ vreg_bob2_e0: bob2 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 		};
 
-		vreg_l1b_e0_1p8: ldo1 {
-			regulator-name = "vreg_l1b_e0_1p8";
+		vreg_l1b0: ldo1 {
+			regulator-name = "vreg_l1b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2b_e0_2p9: ldo2 {
-			regulator-name = "vreg_l2b_e0_2p9";
+		vreg_l2b0: ldo2 {
+			regulator-name = "vreg_l2b0";
 			regulator-min-microvolt = <2904000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l7b_e0_2p79: ldo7 {
-			regulator-name = "vreg_l7b_e0_2p79";
+		vreg_l7b0: ldo7 {
+			regulator-name = "vreg_l7b0";
 			regulator-min-microvolt = <2790000>;
 			regulator-max-microvolt = <2792000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l8b_e0_3p3: ldo8 {
-			regulator-name = "vreg_l8b_e0_3p3";
+		vreg_l8b0: ldo8 {
+			regulator-name = "vreg_l8b0";
 			regulator-min-microvolt = <1504000>;
 			regulator-max-microvolt = <3304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l9b_e0_2p9: ldo9 {
-			regulator-name = "vreg_l9b_e0_2p9";
+		vreg_l9b0: ldo9 {
+			regulator-name = "vreg_l9b0";
 			regulator-min-microvolt = <2704000>;
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l10b_e0_1p8: ldo10 {
-			regulator-name = "vreg_l10b_e0_1p8";
+		vreg_l10b0: ldo10 {
+			regulator-name = "vreg_l10b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l11b_e0_1p2: ldo11 {
-			regulator-name = "vreg_l11b_e0_1p2";
+		vreg_l11b0: ldo11 {
+			regulator-name = "vreg_l11b0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l12b_e0_1p2: ldo12 {
-			regulator-name = "vreg_l12b_e0_1p2";
+		vreg_l12b0: ldo12 {
+			regulator-name = "vreg_l12b0";
 			regulator-min-microvolt = <1144000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l15b_e0_1p8: ldo15 {
-			regulator-name = "vreg_l15b_e0_1p8";
+		vreg_l15b0: ldo15 {
+			regulator-name = "vreg_l15b0";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-always-on;
 		};
 
-		vreg_l17b_e0_2p4: ldo17 {
-			regulator-name = "vreg_l17b_e0_2p4";
+		vreg_l17b0: ldo17 {
+			regulator-name = "vreg_l17b0";
 			regulator-min-microvolt = <2400000>;
 			regulator-max-microvolt = <2700000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l18b_e0_1p2: ldo18 {
-			regulator-name = "vreg_l18b_e0_1p2";
+		vreg_l18b0: ldo18 {
+			regulator-name = "vreg_l18b0";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -491,29 +491,29 @@ regulators-1 {
 		compatible = "qcom,pmcx0102-rpmh-regulators";
 		qcom,pmic-id = "C_E1";
 
-		vreg_l1c_e1_0p82: ldo1 {
-			regulator-name = "vreg_l1c_e1_0p82";
+		vreg_l1c1: ldo1 {
+			regulator-name = "vreg_l1c1";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2c_e1_1p14: ldo2 {
-			regulator-name = "vreg_l2c_e1_1p14";
+		vreg_l2c1: ldo2 {
+			regulator-name = "vreg_l2c1";
 			regulator-min-microvolt = <1144000>;
 			regulator-max-microvolt = <1144000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3c_e1_0p89: ldo3 {
-			regulator-name = "vreg_l3c_e1_0p89";
+		vreg_l3c1: ldo3 {
+			regulator-name = "vreg_l3c1";
 			regulator-min-microvolt = <890000>;
 			regulator-max-microvolt = <980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4c_e1_0p72: ldo4 {
-			regulator-name = "vreg_l4c_e1_0p72";
+		vreg_l4c1: ldo4 {
+			regulator-name = "vreg_l4c1";
 			regulator-min-microvolt = <720000>;
 			regulator-max-microvolt = <720000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -524,43 +524,43 @@ regulators-2 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "F_E0";
 
-		vreg_s7f_e0_1p32: smps7 {
-			regulator-name = "vreg_s7f_e0_1p32";
+		vreg_s7f0: smps7 {
+			regulator-name = "vreg_s7f0";
 			regulator-min-microvolt = <1320000>;
 			regulator-max-microvolt = <1352000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_s8f_e0_0p95: smps8 {
-			regulator-name = "vreg_s8f_e0_0p95";
+		vreg_s8f0: smps8 {
+			regulator-name = "vreg_s8f0";
 			regulator-min-microvolt = <952000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_s9f_e0_1p9: smps9 {
-			regulator-name = "vreg_s9f_e0_1p9";
+		vreg_s9f0: smps9 {
+			regulator-name = "vreg_s9f0";
 			regulator-min-microvolt = <1900000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2f_e0_0p94: ldo2 {
-			regulator-name = "vreg_l2f_e0_0p94";
+		vreg_l2f0: ldo2 {
+			regulator-name = "vreg_l2f0";
 			regulator-min-microvolt = <936000>;
 			regulator-max-microvolt = <936000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3f_e0_0p91: ldo3 {
-			regulator-name = "vreg_l3f_e0_0p91";
+		vreg_l3f0: ldo3 {
+			regulator-name = "vreg_l3f0";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4f_e0_0p3: ldo4 {
-			regulator-name = "vreg_l4f_e0_0p3";
+		vreg_l4f0: ldo4 {
+			regulator-name = "vreg_l4f0";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -571,29 +571,29 @@ regulators-3 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "F_E1";
 
-		vreg_s7f_e1_0p3: smps7 {
-			regulator-name = "vreg_s7f_e1_0p3";
+		vreg_s7f1: smps7 {
+			regulator-name = "vreg_s7f1";
 			regulator-min-microvolt = <300000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l1f_e1_0p88: ldo1 {
-			regulator-name = "vreg_l1f_e1_0p88";
+		vreg_l1f1: ldo1 {
+			regulator-name = "vreg_l1f1";
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2f_e1_0p9: ldo2 {
-			regulator-name = "vreg_l2f_e1_0p9";
+		vreg_l2f1: ldo2 {
+			regulator-name = "vreg_l2f1";
 			regulator-min-microvolt = <904000>;
 			regulator-max-microvolt = <904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4f_e1_1p2: ldo4 {
-			regulator-name = "vreg_l4f_e1_1p2";
+		vreg_l4f1: ldo4 {
+			regulator-name = "vreg_l4f1";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -604,29 +604,29 @@ regulators-4 {
 		compatible = "qcom,pmh0110-rpmh-regulators";
 		qcom,pmic-id = "H_E0";
 
-		vreg_l1h_e0_0p94: ldo1 {
-			regulator-name = "vreg_l1h_e0_0p94";
+		vreg_l1h0: ldo1 {
+			regulator-name = "vreg_l1h0";
 			regulator-min-microvolt = <936000>;
 			regulator-max-microvolt = <936000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l2h_e0_0p72: ldo2 {
-			regulator-name = "vreg_l2h_e0_0p72";
+		vreg_l2h0: ldo2 {
+			regulator-name = "vreg_l2h0";
 			regulator-min-microvolt = <832000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l3h_e0_0p32: ldo3 {
-			regulator-name = "vreg_l3h_e0_0p32";
+		vreg_l3h0: ldo3 {
+			regulator-name = "vreg_l3h0";
 			regulator-min-microvolt = <320000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l4h_e0_1p2: ldo4 {
-			regulator-name = "vreg_l4h_e0_1p2";
+		vreg_l4h0: ldo4 {
+			regulator-name = "vreg_l4h0";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1320000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -656,7 +656,7 @@ touchpad@2c {
 		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
 
 		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l15b_e0_1p8>;
+		vddl-supply = <&vreg_l15b0>;
 
 		pinctrl-0 = <&tpad_default>;
 		pinctrl-names = "default";
@@ -672,7 +672,7 @@ keyboard@3a {
 		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
 
 		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l15b_e0_1p8>;
+		vddl-supply = <&vreg_l15b0>;
 
 		pinctrl-0 = <&kybd_default>;
 		pinctrl-names = "default";
@@ -692,8 +692,8 @@ ptn3222_0: redriver@43 {
 
 		reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
 
-		vdd3v3-supply = <&vreg_l8b_e0_3p3>;
-		vdd1v8-supply = <&vreg_l15b_e0_1p8>;
+		vdd3v3-supply = <&vreg_l8b0>;
+		vdd1v8-supply = <&vreg_l15b0>;
 
 		#phy-cells = <0>;
 	};
@@ -704,8 +704,8 @@ ptn3222_1: redriver@4b {
 
 		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
 
-		vdd3v3-supply = <&vreg_l8b_e0_3p3>;
-		vdd1v8-supply = <&vreg_l15b_e0_1p8>;
+		vdd3v3-supply = <&vreg_l8b0>;
+		vdd1v8-supply = <&vreg_l15b0>;
 
 		#phy-cells = <0>;
 	};
@@ -716,8 +716,8 @@ ptn3222_cam: redriver@47 {
 
 		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
 
-		vdd3v3-supply = <&vreg_l8b_e0_3p3>;
-		vdd1v8-supply = <&vreg_l15b_e0_1p8>;
+		vdd3v3-supply = <&vreg_l8b0>;
+		vdd1v8-supply = <&vreg_l15b0>;
 
 		#phy-cells = <0>;
 	};
@@ -728,8 +728,8 @@ ptn3222_fpr: redriver@4f {
 
 		reset-gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
 
-		vdd3v3-supply = <&vreg_l8b_e0_3p3>;
-		vdd1v8-supply = <&vreg_l15b_e0_1p8>;
+		vdd3v3-supply = <&vreg_l8b0>;
+		vdd1v8-supply = <&vreg_l15b0>;
 
 		#phy-cells = <0>;
 	};
@@ -739,7 +739,7 @@ &lpass_vamacro {
 	pinctrl-0 = <&dmic01_default>;
 	pinctrl-names = "default";
 	qcom,dmic-sample-rate = <4800000>;
-	vdd-micb-supply = <&vreg_l1b_e0_1p8>;
+	vdd-micb-supply = <&vreg_l1b0>;
 };
 
 &mdss {
@@ -796,8 +796,8 @@ &mdss_dp3_out {
 };
 
 &mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l2f_e1_0p9>;
-	vdda-pll-supply = <&vreg_l4f_e1_1p2>;
+	vdda-phy-supply = <&vreg_l2f1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -811,8 +811,8 @@ &pcie4 {
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l1c_e1_0p82>;
-	vdda-pll-supply = <&vreg_l4f_e1_1p2>;
+	vdda-phy-supply = <&vreg_l1c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -848,8 +848,8 @@ &pcie5 {
 };
 
 &pcie5_phy {
-	vdda-phy-supply = <&vreg_l2f_e0_0p94>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
+	vdda-phy-supply = <&vreg_l2f0>;
+	vdda-pll-supply = <&vreg_l4h0>;
 
 	status = "okay";
 };
@@ -870,8 +870,8 @@ &pcie6 {
 };
 
 &pcie6_phy {
-	vdda-phy-supply = <&vreg_l1c_e1_0p82>;
-	vdda-pll-supply = <&vreg_l4f_e1_1p2>;
+	vdda-phy-supply = <&vreg_l1c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -930,8 +930,8 @@ left_spkr: speaker@0,0 {
 		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "SpkrLeft";
-		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
-		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <1 2 3 7 12 14>;
 	};
 
@@ -942,42 +942,42 @@ right_spkr: speaker@0,1 {
 		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "SpkrRight";
-		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
-		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		vdd-1p8-supply = <&vreg_l15b0>;
+		vdd-io-supply = <&vreg_l18b0>;
 		qcom,port-mapping = <4 5 6 7 13 15>;
 	};
 };
 
 &smb2370_j_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b_e0_1p8>;
-	vdd3-supply = <&vreg_l7b_e0_2p79>;
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
 };
 
 &smb2370_k_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b_e0_1p8>;
-	vdd3-supply = <&vreg_l7b_e0_2p79>;
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
 };
 
 &tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f_e1_0p9>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f_e1_0p9>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f_e1_0p9>;
-	vdda-qrefrpt3-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qrefrpt5-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f_e1_0p9>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f_e1_0p9>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f_e1_0p9>;
-	vdda-qrefrx3-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qrefrx4-0p9-supply = <&vreg_l2h_e0_0p72>;
-	vdda-qrefrx5-0p9-supply = <&vreg_l3f_e0_0p91>;
-	vdda-qreftx0-0p9-supply = <&vreg_l3f_e0_0p91>;
-	vdda-qreftx0-1p2-supply = <&vreg_l4h_e0_1p2>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f_e1_0p88>;
-	vdda-refgen3-0p9-supply = <&vreg_l2f_e0_0p94>;
-	vdda-refgen3-1p2-supply = <&vreg_l4h_e0_1p2>;
-	vdda-refgen4-0p9-supply = <&vreg_l1f_e1_0p88>;
-	vdda-refgen4-1p2-supply = <&vreg_l4f_e1_1p2>;
+	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrpt5-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx3-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
+	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
+	vdda-refgen3-1p2-supply = <&vreg_l4h0>;
+	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
 };
 
 &tlmm {
@@ -1149,8 +1149,8 @@ &usb_0_dwc3_hs {
 };
 
 &usb_0_hsphy {
-	vdd-supply = <&vreg_l3f_e0_0p91>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l3f0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	phys = <&smb2370_j_e2_eusb2_repeater>;
 
@@ -1158,9 +1158,9 @@ &usb_0_hsphy {
 };
 
 &usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l3f_e0_0p91>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
-	refgen-supply = <&vreg_l2f_e0_0p94>;
+	vdda-phy-supply = <&vreg_l3f0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l2f0>;
 
 	status = "okay";
 };
@@ -1178,8 +1178,8 @@ &usb_1_dwc3_hs {
 };
 
 &usb_1_hsphy {
-	vdd-supply = <&vreg_l3f_e0_0p91>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l3f0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	phys = <&smb2370_k_e2_eusb2_repeater>;
 
@@ -1187,9 +1187,9 @@ &usb_1_hsphy {
 };
 
 &usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l1h_e0_0p94>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
-	refgen-supply = <&vreg_l2f_e0_0p94>;
+	vdda-phy-supply = <&vreg_l1h0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l2f0>;
 
 	status = "okay";
 };
@@ -1203,8 +1203,8 @@ &usb_mp {
 };
 
 &usb_mp_hsphy0 {
-	vdd-supply = <&vreg_l2h_e0_0p72>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l2h0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	phys = <&ptn3222_0>;
 
@@ -1212,8 +1212,8 @@ &usb_mp_hsphy0 {
 };
 
 &usb_mp_hsphy1 {
-	vdd-supply = <&vreg_l2h_e0_0p72>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l2h0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	phys = <&ptn3222_1>;
 //USB-A..
@@ -1221,17 +1221,17 @@ &usb_mp_hsphy1 {
 };
 
 &usb_mp_qmpphy0 {
-	vdda-phy-supply = <&vreg_l2h_e0_0p72>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
-	refgen-supply = <&vreg_l4f_e1_1p2>;
+	vdda-phy-supply = <&vreg_l2h0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
 
 &usb_mp_qmpphy1 {
-	vdda-phy-supply = <&vreg_l2h_e0_0p72>;
-	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
-	refgen-supply = <&vreg_l4f_e1_1p2>;
+	vdda-phy-supply = <&vreg_l2h0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l4f1>;
 
 	status = "okay";
 };
@@ -1243,8 +1243,8 @@ &usb_hs {
 };
 
 &usb_hs_phy {
-	vdd-supply = <&vreg_l2h_e0_0p72>;
-	vdda12-supply = <&vreg_l4h_e0_1p2>;
+	vdd-supply = <&vreg_l2h0>;
+	vdda12-supply = <&vreg_l4h0>;
 
 	phys = <&ptn3222_cam>;
 
@@ -1263,8 +1263,8 @@ &usb_2 {
 };
 
 &usb_2_hsphy {
-	vdd-supply = <&vreg_l4c_e1_0p72>;
-	vdda12-supply = <&vreg_l4f_e1_1p2>;
+	vdd-supply = <&vreg_l4c1>;
+	vdda12-supply = <&vreg_l4f1>;
 
 	phys = <&ptn3222_fpr>;
 

-- 
2.56.0


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/3] arm64: dts: qcom: Unify Glymur/Mahua regulator handles
  2026-10-28 20:04 ` [PATCH 1/3] arm64: dts: qcom: Unify Glymur/Mahua regulator handles Konrad Dybcio
@ 2026-10-29  8:36   ` Abel Vesa
  0 siblings, 0 replies; 10+ messages in thread
From: Abel Vesa @ 2026-10-29  8:36 UTC (permalink / raw)
  To: Konrad Dybcio
  Cc: Bjorn Andersson, Abel Vesa, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Dmitry Baryshkov, Gopikrishna Garmidi,
	linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio

On 26-10-28 21:04:24, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> 
> In preparation for removing on-SoC invariants from each device's DT,
> start with aligning the regulator names and phandles to the format that
> appears on schematics.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 2/3] arm64: dts: qcom: Consolidate Glymur CoB power grid
  2026-10-28 20:04 [PATCH 0/3] Commonize Glymur regulator settings for fixed rails Konrad Dybcio
  2026-10-28 20:04 ` [PATCH 1/3] arm64: dts: qcom: Unify Glymur/Mahua regulator handles Konrad Dybcio
@ 2026-10-28 20:04 ` Konrad Dybcio
  2026-10-28 20:17   ` sashiko-bot
  2026-10-29  8:51   ` Abel Vesa
  2026-10-28 20:04 ` [PATCH 3/3] arm64: dts: qcom: glymur-crd: Drop L4F0 Konrad Dybcio
  2026-10-29  9:39 ` [PATCH v1 0/3] Commonize Glymur regulator settings for fixed rails Sivansh Gupta
  3 siblings, 2 replies; 10+ messages in thread
From: Konrad Dybcio @ 2026-10-28 20:04 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Dmitry Baryshkov,
	Gopikrishna Garmidi
  Cc: linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio

From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

The power grid is partly defined by connections to the on-SoC
peripherals, which (due to various reasons, electrical and practical)
are well-defined for each PMIC configuration. Factor out the common
bits for Glymur CoB devices.

Because some DTs (mostly the CRD) disagreed about certain values, I
made sure to look up the desired one for each of these common rails,
they are now set as expected.

This enables one to take care of most required vreg settings with a
single #include.

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 .../dts/qcom/glymur-asus-zenbook-a14-ux3407na.dts  | 235 +------------
 arch/arm64/boot/dts/qcom/glymur-cob.dtsi           | 310 +++++++++++++++++
 arch/arm64/boot/dts/qcom/glymur-crd.dts            |  21 +-
 arch/arm64/boot/dts/qcom/glymur-crd.dtsi           | 358 ++++----------------
 .../boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts    | 198 +----------
 .../boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts    | 283 ++--------------
 arch/arm64/boot/dts/qcom/glymur-qcb.dts            | 320 ++++--------------
 arch/arm64/boot/dts/qcom/mahua-crd.dts             |  15 +-
 .../qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts   | 366 +++------------------
 arch/arm64/boot/dts/qcom/mahua.dtsi                |   2 +-
 10 files changed, 534 insertions(+), 1574 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur-asus-zenbook-a14-ux3407na.dts b/arch/arm64/boot/dts/qcom/glymur-asus-zenbook-a14-ux3407na.dts
index e96e65a0c5b4..dcbc88a2108f 100644
--- a/arch/arm64/boot/dts/qcom/glymur-asus-zenbook-a14-ux3407na.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-asus-zenbook-a14-ux3407na.dts
@@ -5,13 +5,7 @@
 /dts-v1/;
 
 #include "glymur.dtsi"
-
-#include "pmcx0102.dtsi"
-#include "pmh0101.dtsi"
-#include "pmh0110-glymur.dtsi"
-#include "pmh0104-glymur.dtsi"
-#include "pmk8850.dtsi"
-#include "smb2370.dtsi"
+#include "glymur-cob.dtsi"
 
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
@@ -355,157 +349,12 @@ m2_e_uart_ep: endpoint@0 {
 	};
 };
 
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pmh0101-rpmh-regulators";
-		qcom,pmic-id = "B_E0";
-
-		vreg_l1b0: ldo1 {
-			regulator-name = "vreg_l1b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7b0: ldo7 {
-			regulator-name = "vreg_l7b0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8b0: ldo8 {
-			regulator-name = "vreg_l8b0";
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l15b0: ldo15 {
-			regulator-name = "vreg_l15b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			/* Provides reference voltage for many undescribed components */
-			regulator-always-on;
-		};
-
-		vreg_l18b0: ldo18 {
-			regulator-name = "vreg_l18b0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-
-			/*
-			 * This is also reference voltage for &pcie3b wake and
-			 * reset signals.
-			 */
-			regulator-always-on;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pmcx0102-rpmh-regulators";
-		qcom,pmic-id = "C_E1";
-
-		vreg_l1c1: ldo1 {
-			regulator-name = "vreg_l1c1";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c1: ldo2 {
-			regulator-name = "vreg_l2c1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c1: ldo3 {
-			regulator-name = "vreg_l3c1";
-			regulator-min-microvolt = <936000>;
-			regulator-max-microvolt = <936000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4c1: ldo4 {
-			regulator-name = "vreg_l4c1";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-2 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "F_E0";
-
-		vreg_l2f0: ldo2 {
-			regulator-name = "vreg_l2f0";
-			regulator-min-microvolt = <936000>;
-			regulator-max-microvolt = <936000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3f0: ldo3 {
-			regulator-name = "vreg_l3f0";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-3 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "F_E1";
-
-		vreg_l1f1: ldo1 {
-			regulator-name = "vreg_l1f1";
-			regulator-min-microvolt = <904000>;
-			regulator-max-microvolt = <904000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f1: ldo2 {
-			regulator-name = "vreg_l2f1";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4f1: ldo4 {
-			regulator-name = "vreg_l4f1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-4 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "H_E0";
-
-		vreg_l1h0: ldo1 {
-			regulator-name = "vreg_l1h0";
-			regulator-min-microvolt = <936000>;
-			regulator-max-microvolt = <936000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2h0: ldo2 {
-			regulator-name = "vreg_l2h0";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4h0: ldo4 {
-			regulator-name = "vreg_l4h0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+&rpmh_vregs_b_e0 {
+	vreg_l8b0: ldo8 {
+		regulator-name = "vreg_l8b0";
+		regulator-min-microvolt = <3304000>;
+		regulator-max-microvolt = <3304000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 };
 
@@ -625,8 +474,6 @@ keyboard@15 {
 };
 
 &lpass_vamacro {
-	vdd-micb-supply = <&vreg_l1b0>;
-
 	pinctrl-0 = <&dmic01_default>;
 	pinctrl-names = "default";
 
@@ -695,9 +542,6 @@ &mdss_dp3_out {
 };
 
 &mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l2f1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -733,9 +577,6 @@ &pcie4 {
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l1c1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -791,16 +632,6 @@ &remoteproc_soccp {
 	status = "okay";
 };
 
-&smb2370_j_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b0>;
-	vdd3-supply = <&vreg_l7b0>;
-};
-
-&smb2370_k_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b0>;
-	vdd3-supply = <&vreg_l7b0>;
-};
-
 &swr0 {
 	status = "okay";
 
@@ -829,26 +660,6 @@ right_speaker: speaker@0,1 {
 	};
 };
 
-&tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
-	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
-	vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
-	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
-	vdda-refgen3-1p2-supply = <&vreg_l4h0>;
-	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
-	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
-};
-
 &tlmm {
 	gpio-reserved-ranges = <4 4>, /* EC Secure */
 			       <10 2>, /* OOB UART */
@@ -1025,19 +836,12 @@ &usb_0_dwc3_hs {
 };
 
 &usb_0_hsphy {
-	vdd-supply = <&vreg_l3f0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&smb2370_j_e2_eusb2_repeater>;
 
 	status = "okay";
 };
 
 &usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l3f0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l2f0>;
-
 	status = "okay";
 };
 
@@ -1054,19 +858,12 @@ &usb_1_dwc3_hs {
 };
 
 &usb_1_hsphy {
-	vdd-supply = <&vreg_l3f0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&smb2370_k_e2_eusb2_repeater>;
 
 	status = "okay";
 };
 
 &usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l1h0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l2f0>;
-
 	status = "okay";
 };
 
@@ -1075,10 +872,6 @@ &usb_1_qmpphy_out {
 };
 
 &usb_2_qmpphy {
-	vdda-phy-supply = <&vreg_l4c1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-	refgen-supply = <&vreg_l4f1>;
-
 	/delete-property/ mode-switch;
 	/delete-property/ orientation-switch;
 
@@ -1106,35 +899,21 @@ &usb_mp {
 };
 
 &usb_mp_hsphy0 {
-	vdd-supply = <&vreg_l2h0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&ptn3222_0>;
 
 	status = "okay";
 };
 
 &usb_mp_hsphy1 {
-	vdd-supply = <&vreg_l2h0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&ptn3222_1>;
 
 	status = "okay";
 };
 
 &usb_mp_qmpphy0 {
-	vdda-phy-supply = <&vreg_l2h0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
 &usb_mp_qmpphy1 {
-	vdda-phy-supply = <&vreg_l2h0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/glymur-cob.dtsi b/arch/arm64/boot/dts/qcom/glymur-cob.dtsi
new file mode 100644
index 000000000000..8b4ba1d384a0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/glymur-cob.dtsi
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ *
+ * Common PMIC settings for on-SoC peripherals found on Glymur-CoB and
+ * derived platforms.
+ */
+
+#include "pmcx0102.dtsi"        /* SPMI0: SID-2/3 SPMI1: SID-2/3 */
+#include "pmh0101.dtsi"         /* SPMI0: SID-1                  */
+#include "pmh0110-glymur.dtsi"  /* SPMI0: SID-5/7 SPMI1: SID-5   */
+#include "pmh0104-glymur.dtsi"  /* SPMI0: SID-8/9 SPMI1: SID-11  */
+#include "pmk8850.dtsi"         /* SPMI0: SID-0                  */
+#include "smb2370.dtsi"         /* SPMI2: SID-9/10/11            */
+
+&apps_rsc {
+	rpmh_vregs_b_e0: regulators-0 {
+		compatible = "qcom,pmh0101-rpmh-regulators";
+		qcom,pmic-id = "B_E0";
+
+		vreg_l1b0: ldo1 {
+			regulator-name = "vreg_l1b0";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b0: ldo7 {
+			regulator-name = "vreg_l7b0";
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* Pull-ups etc. */
+		vreg_l10b0: ldo10 {
+			regulator-name = "vreg_l10b0";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* Pull-ups etc. */
+		vreg_l11b0: ldo11 {
+			regulator-name = "vreg_l11b0";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* Pull-ups etc. */
+		vreg_l15b0: ldo15 {
+			regulator-name = "vreg_l15b0";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			/* Provides reference voltage for many undescribed components */
+			regulator-always-on;
+		};
+
+		/* Pull-ups etc. */
+		vreg_l18b0: ldo18 {
+			regulator-name = "vreg_l18b0";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			/* Provides reference voltage for many undescribed components */
+			regulator-always-on;
+		};
+	};
+
+	rpmh_vregs_c_e1: regulators-1 {
+		compatible = "qcom,pmcx0102-rpmh-regulators";
+		qcom,pmic-id = "C_E1";
+
+		vreg_l1c1: ldo1 {
+			regulator-name = "vreg_l1c1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c1: ldo2 {
+			regulator-name = "vreg_l2c1";
+			regulator-min-microvolt = <1216000>;
+			regulator-max-microvolt = <1216000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c1: ldo3 {
+			regulator-name = "vreg_l3c1";
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c1: ldo4 {
+			regulator-name = "vreg_l4c1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	rpmh_vregs_f_e0: regulators-2 {
+		compatible = "qcom,pmh0110-rpmh-regulators";
+		qcom,pmic-id = "F_E0";
+
+		vreg_l2f0: ldo2 {
+			regulator-name = "vreg_l2f0";
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <944000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f0: ldo3 {
+			regulator-name = "vreg_l3f0";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* Voltage input for PMCX0104 */
+		vreg_s9f0: smps9 {
+			regulator-name = "vreg_s9f0";
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	rpmh_vregs_f_e1: regulators-3 {
+		compatible = "qcom,pmh0110-rpmh-regulators";
+		qcom,pmic-id = "F_E1";
+
+		vreg_l1f1: ldo1 {
+			regulator-name = "vreg_l1f1";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f1: ldo2 {
+			regulator-name = "vreg_l2f1";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4f1: ldo4 {
+			regulator-name = "vreg_l4f1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	rpmh_vregs_h_e0: regulators-4 {
+		compatible = "qcom,pmh0110-rpmh-regulators";
+		qcom,pmic-id = "H_E0";
+
+		vreg_l1h0: ldo1 {
+			regulator-name = "vreg_l1h0";
+			regulator-min-microvolt = <936000>;
+			regulator-max-microvolt = <936000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2h0: ldo2 {
+			regulator-name = "vreg_l2h0";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* DDR, QFPROM */
+		vreg_l3h0: ldo3 {
+			regulator-name = "vreg_l3h0";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4h0: ldo4 {
+			regulator-name = "vreg_l4h0";
+			regulator-min-microvolt = <1216000>;
+			regulator-max-microvolt = <1216000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&lpass_vamacro {
+	vdd-micb-supply = <&vreg_l1b0>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l2f1>;
+	vdda-pll-supply = <&vreg_l4f1>;
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l1c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l2f0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+};
+
+&pcie6_phy {
+	vdda-phy-supply = <&vreg_l1c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
+};
+
+&smb2370_j_e2_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
+};
+
+&smb2370_k_e2_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
+};
+
+&smb2370_l_e2_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b0>;
+	vdd3-supply = <&vreg_l7b0>;
+};
+
+&tcsr {
+	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
+	vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
+	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
+	vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
+	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
+	vdda-refgen3-1p2-supply = <&vreg_l4h0>;
+	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
+	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
+};
+
+&usb_0_hsphy {
+	vdd-supply = <&vreg_l3f0>;
+	vdda12-supply = <&vreg_l4h0>;
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l3f0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l2f0>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l3f0>;
+	vdda12-supply = <&vreg_l4h0>;
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l1h0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l2f0>;
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l4c1>;
+	vdda12-supply = <&vreg_l4f1>;
+};
+
+&usb_2_qmpphy {
+	vdda-phy-supply = <&vreg_l4c1>;
+	vdda-pll-supply = <&vreg_l4f1>;
+	refgen-supply = <&vreg_l4f1>;
+};
+
+&usb_hs_phy {
+	vdd-supply = <&vreg_l2h0>;
+	vdda12-supply = <&vreg_l4h0>;
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2h0>;
+	vdda12-supply = <&vreg_l4h0>;
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2h0>;
+	vdda12-supply = <&vreg_l4h0>;
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l2h0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l4f1>;
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l2h0>;
+	vdda-pll-supply = <&vreg_l4h0>;
+	refgen-supply = <&vreg_l4f1>;
+};
diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
index dfac99056bcd..7afb15074190 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "glymur.dtsi"
+#include "glymur-cob.dtsi"
 #include "glymur-crd.dtsi"
 
 / {
@@ -36,23 +37,3 @@ &pcie3_phy {
 	vdda-refgen0p9-supply = <&vreg_l1c1>;
 	vdda-refgen1p2-supply = <&vreg_l4f1>;
 };
-
-&tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
-	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
-	vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
-	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
-	vdda-refgen3-1p2-supply = <&vreg_l4h0>;
-	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
-	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
-};
diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
index 4744bcb3c123..422ed0308147 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
@@ -3,13 +3,6 @@
  * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
  */
 
-#include "pmcx0102.dtsi"        /* SPMI0: SID-2/3 SPMI1: SID-2/3 */
-#include "pmh0101.dtsi"         /* SPMI0: SID-1                  */
-#include "pmh0110-glymur.dtsi"  /* SPMI0: SID-5/7 SPMI1: SID-5   */
-#include "pmh0104-glymur.dtsi"  /* SPMI0: SID-8/9 SPMI1: SID-11  */
-#include "pmk8850.dtsi"         /* SPMI0: SID-0                  */
-#include "smb2370.dtsi"         /* SPMI2: SID-9/10/11            */
-
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
@@ -345,247 +338,86 @@ vreg_pmu_pcie_1p8: ldo9 {
 	};
 };
 
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pmh0101-rpmh-regulators";
-		qcom,pmic-id = "B_E0";
-
-		vreg_bob1_e0: bob1 {
-			regulator-name = "vreg_bob1_e0";
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <4224000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
-		};
-
-		vreg_bob2_e0: bob2 {
-			regulator-name = "vreg_bob2_e0";
-			regulator-min-microvolt = <2540000>;
-			regulator-max-microvolt = <3600000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
-		};
-
-		vreg_l1b0: ldo1 {
-			regulator-name = "vreg_l1b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2b0: ldo2 {
-			regulator-name = "vreg_l2b0";
-			regulator-min-microvolt = <1804000>;
-			regulator-max-microvolt = <2904000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7b0: ldo7 {
-			regulator-name = "vreg_l7b0";
-			regulator-min-microvolt = <2790000>;
-			regulator-max-microvolt = <2792000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8b0: ldo8 {
-			regulator-name = "vreg_l8b0";
-			regulator-min-microvolt = <1504000>;
-			regulator-max-microvolt = <1504000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9b0: ldo9 {
-			regulator-name = "vreg_l9b0";
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l10b0: ldo10 {
-			regulator-name = "vreg_l10b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l11b0: ldo11 {
-			regulator-name = "vreg_l11b0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l12b0: ldo12 {
-			regulator-name = "vreg_l12b0";
-			regulator-min-microvolt = <1144000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l15b0: ldo15 {
-			regulator-name = "vreg_l15b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l17b0: ldo17 {
-			regulator-name = "vreg_l17b0";
-			regulator-min-microvolt = <2400000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l18b0: ldo18 {
-			regulator-name = "vreg_l18b0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+&rpmh_vregs_b_e0 {
+	vreg_bob1_e0: bob1 {
+		regulator-name = "vreg_bob1_e0";
+		regulator-min-microvolt = <2200000>;
+		regulator-max-microvolt = <4224000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 	};
 
-	regulators-1 {
-		compatible = "qcom,pmcx0102-rpmh-regulators";
-		qcom,pmic-id = "C_E1";
-
-		vreg_l1c1: ldo1 {
-			regulator-name = "vreg_l1c1";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c1: ldo2 {
-			regulator-name = "vreg_l2c1";
-			regulator-min-microvolt = <1144000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c1: ldo3 {
-			regulator-name = "vreg_l3c1";
-			regulator-min-microvolt = <890000>;
-			regulator-max-microvolt = <980000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4c1: ldo4 {
-			regulator-name = "vreg_l4c1";
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <720000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_bob2_e0: bob2 {
+		regulator-name = "vreg_bob2_e0";
+		regulator-min-microvolt = <2540000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 	};
 
-	regulators-2 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "F_E0";
-
-		vreg_s7f0: smps7 {
-			regulator-name = "vreg_s7f0";
-			regulator-min-microvolt = <1320000>;
-			regulator-max-microvolt = <1352000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s8f0: smps8 {
-			regulator-name = "vreg_s8f0";
-			regulator-min-microvolt = <952000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s9f0: smps9 {
-			regulator-name = "vreg_s9f0";
-			regulator-min-microvolt = <1900000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f0: ldo2 {
-			regulator-name = "vreg_l2f0";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3f0: ldo3 {
-			regulator-name = "vreg_l3f0";
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <720000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4f0: ldo4 {
-			regulator-name = "vreg_l4f0";
-			regulator-min-microvolt = <1080000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_l2b0: ldo2 {
+		regulator-name = "vreg_l2b0";
+		regulator-min-microvolt = <1804000>;
+		regulator-max-microvolt = <2904000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 
-	regulators-3 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "F_E1";
-
-		vreg_s7f1: smps7 {
-			regulator-name = "vreg_s7f1";
-			regulator-min-microvolt = <300000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1f1: ldo1 {
-			regulator-name = "vreg_l1f1";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f1: ldo2 {
-			regulator-name = "vreg_l2f1";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4f1: ldo4 {
-			regulator-name = "vreg_l4f1";
-			regulator-min-microvolt = <1080000>;
-			regulator-max-microvolt = <1320000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_l8b0: ldo8 {
+		regulator-name = "vreg_l8b0";
+		regulator-min-microvolt = <1504000>;
+		regulator-max-microvolt = <1504000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 
-	regulators-4 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "H_E0";
+	vreg_l9b0: ldo9 {
+		regulator-name = "vreg_l9b0";
+		regulator-min-microvolt = <2960000>;
+		regulator-max-microvolt = <2960000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
 
-		vreg_l1h0: ldo1 {
-			regulator-name = "vreg_l1h0";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_l12b0: ldo12 {
+		regulator-name = "vreg_l12b0";
+		regulator-min-microvolt = <1144000>;
+		regulator-max-microvolt = <1144000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
 
-		vreg_l2h0: ldo2 {
-			regulator-name = "vreg_l2h0";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_l17b0: ldo17 {
+		regulator-name = "vreg_l17b0";
+		regulator-min-microvolt = <2400000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
+};
 
-		vreg_l3h0: ldo3 {
-			regulator-name = "vreg_l3h0";
-			regulator-min-microvolt = <320000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+&rpmh_vregs_f_e0 {
+	vreg_l4f0: ldo4 {
+		regulator-name = "vreg_l4f0";
+		regulator-min-microvolt = <1080000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
 
-		vreg_l4h0: ldo4 {
-			regulator-name = "vreg_l4h0";
-			regulator-min-microvolt = <1080000>;
-			regulator-max-microvolt = <1320000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_s7f0: smps7 {
+		regulator-name = "vreg_s7f0";
+		regulator-min-microvolt = <1320000>;
+		regulator-max-microvolt = <1352000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
+
+	vreg_s8f0: smps8 {
+		regulator-name = "vreg_s8f0";
+		regulator-min-microvolt = <952000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
+};
+
+&rpmh_vregs_f_e1 {
+	vreg_s7f1: smps7 {
+		regulator-name = "vreg_s7f1";
+		regulator-min-microvolt = <300000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 };
 
@@ -698,7 +530,6 @@ &lpass_vamacro {
 	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 	pinctrl-names = "default";
 	qcom,dmic-sample-rate = <4800000>;
-	vdd-micb-supply = <&vreg_l1b0>;
 };
 
 &mdss {
@@ -736,9 +567,6 @@ &mdss_dp3_out {
 };
 
 &mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l2f1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -762,9 +590,6 @@ &pcie4 {
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l1c1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -798,9 +623,6 @@ &pcie5 {
 };
 
 &pcie5_phy {
-	vdda-phy-supply = <&vreg_l2f0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-
 	status = "okay";
 };
 
@@ -819,9 +641,6 @@ &pcie6 {
 };
 
 &pcie6_phy {
-	vdda-phy-supply = <&vreg_l1c1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -889,16 +708,6 @@ &remoteproc_cdsp {
 	status = "okay";
 };
 
-&smb2370_j_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b0>;
-	vdd3-supply = <&vreg_l7b0>;
-};
-
-&smb2370_k_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b0>;
-	vdd3-supply = <&vreg_l7b0>;
-};
-
 &sdhc_2 {
 	vmmc-supply = <&vreg_l9b0>;
 	vqmmc-supply = <&vreg_l2b0>;
@@ -1182,19 +991,12 @@ &usb_0_dwc3_hs {
 };
 
 &usb_0_hsphy {
-	vdd-supply = <&vreg_l3f0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&smb2370_j_e2_eusb2_repeater>;
 
 	status = "okay";
 };
 
 &usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l3f0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l2f0>;
-
 	status = "okay";
 };
 
@@ -1211,19 +1013,12 @@ &usb_1_dwc3_hs {
 };
 
 &usb_1_hsphy {
-	vdd-supply = <&vreg_l3f0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&smb2370_k_e2_eusb2_repeater>;
 
 	status = "okay";
 };
 
 &usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l1h0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l2f0>;
-
 	status = "okay";
 };
 
@@ -1238,9 +1033,6 @@ &usb_hs {
 };
 
 &usb_hs_phy {
-	vdd-supply = <&vreg_l2h0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&ptn3222_1>;
 
 	status = "okay";
@@ -1251,33 +1043,19 @@ &usb_mp {
 };
 
 &usb_mp_hsphy0 {
-	vdd-supply = <&vreg_l2h0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&ptn3222_0>;
 
 	status = "okay";
 };
 
 &usb_mp_hsphy1 {
-	vdd-supply = <&vreg_l2h0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	status = "okay";
 };
 
 &usb_mp_qmpphy0 {
-	vdda-phy-supply = <&vreg_l2h0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
 &usb_mp_qmpphy1 {
-	vdda-phy-supply = <&vreg_l2h0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts b/arch/arm64/boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts
index ef77e70c8af3..d0a98a7ed02a 100644
--- a/arch/arm64/boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts
@@ -5,13 +5,7 @@
 /dts-v1/;
 
 #include "glymur.dtsi"
-
-#include "pmcx0102.dtsi"
-#include "pmh0101.dtsi"
-#include "pmh0110-glymur.dtsi"
-#include "pmh0104-glymur.dtsi"
-#include "pmk8850.dtsi"
-#include "smb2370.dtsi"
+#include "glymur-cob.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/gpio-keys.h>
@@ -292,124 +286,6 @@ vreg_pmu_pcie_1p8: ldo9 {
 	};
 };
 
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pmh0101-rpmh-regulators";
-		qcom,pmic-id = "B_E0";
-
-		vreg_l1b0: ldo1 {
-			regulator-name = "vreg_l1b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7b0: ldo7 {
-			regulator-name = "vreg_l7b0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l15b0: ldo15 {
-			regulator-name = "vreg_l15b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l18b0: ldo18 {
-			regulator-name = "vreg_l18b0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pmcx0102-rpmh-regulators";
-		qcom,pmic-id = "C_E1";
-
-		vreg_l1c1: ldo1 {
-			regulator-name = "vreg_l1c1";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-2 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "F_E0";
-
-		vreg_l2f0: ldo2 {
-			regulator-name = "vreg_l2f0";
-			regulator-min-microvolt = <936000>;
-			regulator-max-microvolt = <936000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3f0: ldo3 {
-			regulator-name = "vreg_l3f0";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-3 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "F_E1";
-
-		vreg_l1f1: ldo1 {
-			regulator-name = "vreg_l1f1";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f1: ldo2 {
-			regulator-name = "vreg_l2f1";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4f1: ldo4 {
-			regulator-name = "vreg_l4f1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-4 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "H_E0";
-
-		vreg_l1h0: ldo1 {
-			regulator-name = "vreg_l1h0";
-			regulator-min-microvolt = <936000>;
-			regulator-max-microvolt = <936000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2h0: ldo2 {
-			regulator-name = "vreg_l2h0";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4h0: ldo4 {
-			regulator-name = "vreg_l4h0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-};
-
 &gmu {
 	status = "okay";
 };
@@ -470,8 +346,6 @@ touchscreen@10 {
 };
 
 &lpass_vamacro {
-	vdd-micb-supply = <&vreg_l1b0>;
-
 	pinctrl-0 = <&dmic01_default>;
 	pinctrl-names = "default";
 
@@ -529,9 +403,6 @@ &mdss_dp3_out {
 };
 
 &mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l2f1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -543,9 +414,6 @@ &pcie4 {
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l1c1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -579,9 +447,6 @@ &pcie5 {
 };
 
 &pcie5_phy {
-	vdda-phy-supply = <&vreg_l2f0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-
 	status = "okay";
 };
 
@@ -624,16 +489,6 @@ &remoteproc_soccp {
 			"qcom/glymur/hp/elitebook-x-g2q/soccp_dtb.mbn";
 };
 
-&smb2370_j_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b0>;
-	vdd3-supply = <&vreg_l7b0>;
-};
-
-&smb2370_k_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b0>;
-	vdd3-supply = <&vreg_l7b0>;
-};
-
 &swr0 {
 	status = "okay";
 
@@ -690,26 +545,6 @@ right_tweeter: speaker@0,1 {
 	};
 };
 
-&tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
-	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
-	vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
-	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
-	vdda-refgen3-1p2-supply = <&vreg_l4h0>;
-	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
-	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
-};
-
 &tlmm {
 	gpio-reserved-ranges = <4 4>, /* EC TZ Secure I3C */
 			       <10 2>, /* OOB UART */
@@ -841,19 +676,12 @@ &usb_0_dwc3_hs {
 };
 
 &usb_0_hsphy {
-	vdd-supply = <&vreg_l3f0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&smb2370_j_e2_eusb2_repeater>;
 
 	status = "okay";
 };
 
 &usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l3f0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l2f0>;
-
 	status = "okay";
 };
 
@@ -870,19 +698,12 @@ &usb_1_dwc3_hs {
 };
 
 &usb_1_hsphy {
-	vdd-supply = <&vreg_l3f0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&smb2370_k_e2_eusb2_repeater>;
 
 	status = "okay";
 };
 
 &usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l1h0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l2f0>;
-
 	status = "okay";
 };
 
@@ -898,9 +719,6 @@ &usb_hs {
 };
 
 &usb_hs_phy {
-	vdd-supply = <&vreg_l2h0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	status = "okay";
 };
 
@@ -910,31 +728,17 @@ &usb_mp {
 };
 
 &usb_mp_hsphy0 {
-	vdd-supply = <&vreg_l2h0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	status = "okay";
 };
 
 &usb_mp_hsphy1 {
-	vdd-supply = <&vreg_l2h0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	status = "okay";
 };
 
 &usb_mp_qmpphy0 {
-	vdda-phy-supply = <&vreg_l2h0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
 &usb_mp_qmpphy1 {
-	vdda-phy-supply = <&vreg_l2h0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts
index 56c22daab056..a8580499e709 100644
--- a/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts
@@ -5,13 +5,7 @@
 /dts-v1/;
 
 #include "glymur.dtsi"
-
-#include "pmcx0102.dtsi"        /* SPMI0: SID-2/3 SPMI1: SID-2/3 */
-#include "pmh0101.dtsi"         /* SPMI0: SID-1                  */
-#include "pmh0110-glymur.dtsi"  /* SPMI0: SID-5/7 SPMI1: SID-5   */
-#include "pmh0104-glymur.dtsi"  /* SPMI0: SID-8/9 SPMI1: SID-11  */
-#include "pmk8850.dtsi"         /* SPMI0: SID-0                  */
-#include "smb2370.dtsi"         /* SPMI2: SID-9/10/11            */
+#include "glymur-cob.dtsi"
 
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/leds/common.h>
@@ -376,205 +370,42 @@ vreg_pmu_pcie_1p8: ldo9 {
 	};
 };
 
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pmh0101-rpmh-regulators";
-		qcom,pmic-id = "B_E0";
-
-		vreg_l1b0: ldo1 {
-			regulator-name = "vreg_l1b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7b0: ldo7 {
-			regulator-name = "vreg_l7b0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8b0: ldo8 {
-			regulator-name = "vreg_l8b0";
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9b0: ldo9 {
-			regulator-name = "vreg_l9b0";
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l10b0: ldo10 {
-			regulator-name = "vreg_l10b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l11b0: ldo11 {
-			regulator-name = "vreg_l11b0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l12b0: ldo12 {
-			regulator-name = "vreg_l12b0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l15b0: ldo15 {
-			regulator-name = "vreg_l15b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l17b0: ldo17 {
-			regulator-name = "vreg_l17b0";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <2504000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l18b0: ldo18 {
-			regulator-name = "vreg_l18b0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+&rpmh_vregs_b_e0 {
+	vreg_l8b0: ldo8 {
+		regulator-name = "vreg_l8b0";
+		regulator-min-microvolt = <3304000>;
+		regulator-max-microvolt = <3304000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 
-	regulators-1 {
-		compatible = "qcom,pmcx0102-rpmh-regulators";
-		qcom,pmic-id = "C_E1";
-
-		vreg_l1c1: ldo1 {
-			regulator-name = "vreg_l1c1";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c1: ldo2 {
-			regulator-name = "vreg_l2c1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c1: ldo3 {
-			regulator-name = "vreg_l3c1";
-			regulator-min-microvolt = <936000>;
-			regulator-max-microvolt = <936000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4c1: ldo4 {
-			regulator-name = "vreg_l4c1";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_l12b0: ldo12 {
+		regulator-name = "vreg_l12b0";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 
-	regulators-2 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "F_E0";
+	vreg_l17b0: ldo17 {
+		regulator-name = "vreg_l17b0";
+		regulator-min-microvolt = <2504000>;
+		regulator-max-microvolt = <2504000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
+};
 
-		vreg_s7f0: smps7 {
-			regulator-name = "vreg_s7f0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s8f0: smps8 {
-			regulator-name = "vreg_s8f0";
-			regulator-min-microvolt = <952000>;
-			regulator-max-microvolt = <952000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f0: ldo2 {
-			regulator-name = "vreg_l2f0";
-			regulator-min-microvolt = <936000>;
-			regulator-max-microvolt = <936000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3f0: ldo3 {
-			regulator-name = "vreg_l3f0";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+&rpmh_vregs_f_e0 {
+	vreg_s7f0: smps7 {
+		regulator-name = "vreg_s7f0";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 
-	regulators-3 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "F_E1";
-
-		vreg_l1f1: ldo1 {
-			regulator-name = "vreg_l1f1";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <904000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f1: ldo2 {
-			regulator-name = "vreg_l2f1";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4f1: ldo4 {
-			regulator-name = "vreg_l4f1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-4 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "H_E0";
-
-		vreg_l1h0: ldo1 {
-			regulator-name = "vreg_l1h0";
-			regulator-min-microvolt = <936000>;
-			regulator-max-microvolt = <936000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2h0: ldo2 {
-			regulator-name = "vreg_l2h0";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3h0: ldo3 {
-			regulator-name = "vreg_l3h0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4h0: ldo4 {
-			regulator-name = "vreg_l4h0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_s8f0: smps8 {
+		regulator-name = "vreg_s8f0";
+		regulator-min-microvolt = <952000>;
+		regulator-max-microvolt = <952000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 };
 
@@ -727,9 +558,6 @@ &mdss_dp3_out {
 };
 
 &mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l2f1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -741,9 +569,6 @@ &pcie4 {
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l1c1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -777,9 +602,6 @@ &pcie5 {
 };
 
 &pcie5_phy {
-	vdda-phy-supply = <&vreg_l2f0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-
 	status = "okay";
 };
 
@@ -798,9 +620,6 @@ &pcie6 {
 };
 
 &pcie6_phy {
-	vdda-phy-supply = <&vreg_l1c1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -860,20 +679,7 @@ &remoteproc_soccp {
 	status = "okay";
 };
 
-&smb2370_j_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b0>;
-	vdd3-supply = <&vreg_l7b0>;
-};
-
-&smb2370_k_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b0>;
-	vdd3-supply = <&vreg_l7b0>;
-};
-
 &smb2370_l_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b0>;
-	vdd3-supply = <&vreg_l7b0>;
-
 	status = "okay";
 };
 
@@ -933,26 +739,6 @@ right_tweeter: speaker@0,1 {
 	};
 };
 
-&tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
-	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
-	vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
-	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
-	vdda-refgen3-1p2-supply = <&vreg_l4h0>;
-	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
-	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
-};
-
 &tlmm {
 	gpio-reserved-ranges = <4 4>, /* EC TZ Secure I3C */
 			       <10 2>, /* OOB UART */
@@ -1142,9 +928,6 @@ &usb_0_dwc3_hs {
 };
 
 &usb_0_hsphy {
-	vdd-supply = <&vreg_l3f0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&smb2370_j_e2_eusb2_repeater>;
 
 	status = "okay";
@@ -1171,9 +954,6 @@ &usb_1_dwc3_hs {
 };
 
 &usb_1_hsphy {
-	vdd-supply = <&vreg_l3f0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&smb2370_k_e2_eusb2_repeater>;
 
 	status = "okay";
@@ -1200,9 +980,6 @@ &usb_2_dwc3_hs {
 };
 
 &usb_2_hsphy {
-	vdd-supply = <&vreg_l4c1>;
-	vdda12-supply = <&vreg_l4f1>;
-
 	phys = <&smb2370_l_e2_eusb2_repeater>;
 
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/glymur-qcb.dts b/arch/arm64/boot/dts/qcom/glymur-qcb.dts
index 3255ad66786e..d365544b0ea0 100644
--- a/arch/arm64/boot/dts/qcom/glymur-qcb.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-qcb.dts
@@ -6,13 +6,7 @@
 /dts-v1/;
 
 #include "glymur.dtsi"
-
-#include "pmcx0102.dtsi"        /* SPMI0: SID-2/3 SPMI1: SID-2/3 */
-#include "pmh0101.dtsi"         /* SPMI0: SID-1                  */
-#include "pmh0110-glymur.dtsi"  /* SPMI0: SID-5/7 SPMI1: SID-5   */
-#include "pmh0104-glymur.dtsi"  /* SPMI0: SID-8/9 SPMI1: SID-11  */
-#include "pmk8850.dtsi"         /* SPMI0: SID-0                  */
-#include "smb2370.dtsi"         /* SPMI2: SID-9/10/11            */
+#include "glymur-cob.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. Glymur QCB";
@@ -178,247 +172,72 @@ vreg_pmu_pcie_1p8: ldo9 {
 	};
 };
 
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pmh0101-rpmh-regulators";
-		qcom,pmic-id = "B_E0";
-
-		vreg_bob1_e0: bob1 {
-			regulator-name = "vreg_bob1_e0";
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <4224000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
-		};
-
-		vreg_bob2_e0: bob2 {
-			regulator-name = "vreg_bob2_e0";
-			regulator-min-microvolt = <2540000>;
-			regulator-max-microvolt = <3600000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
-		};
-
-		vreg_l1b0: ldo1 {
-			regulator-name = "vreg_l1b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2b0: ldo2 {
-			regulator-name = "vreg_l2b0";
-			regulator-min-microvolt = <2904000>;
-			regulator-max-microvolt = <2904000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7b0: ldo7 {
-			regulator-name = "vreg_l7b0";
-			regulator-min-microvolt = <2790000>;
-			regulator-max-microvolt = <2792000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8b0: ldo8 {
-			regulator-name = "vreg_l8b0";
-			regulator-min-microvolt = <1504000>;
-			regulator-max-microvolt = <1504000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9b0: ldo9 {
-			regulator-name = "vreg_l9b0";
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2704000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l10b0: ldo10 {
-			regulator-name = "vreg_l10b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l11b0: ldo11 {
-			regulator-name = "vreg_l11b0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l12b0: ldo12 {
-			regulator-name = "vreg_l12b0";
-			regulator-min-microvolt = <1144000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l15b0: ldo15 {
-			regulator-name = "vreg_l15b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l17b0: ldo17 {
-			regulator-name = "vreg_l17b0";
-			regulator-min-microvolt = <2400000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l18b0: ldo18 {
-			regulator-name = "vreg_l18b0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+&rpmh_vregs_b_e0 {
+	vreg_bob1_e0: bob1 {
+		regulator-name = "vreg_bob1_e0";
+		regulator-min-microvolt = <2200000>;
+		regulator-max-microvolt = <4224000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 	};
 
-	regulators-1 {
-		compatible = "qcom,pmcx0102-rpmh-regulators";
-		qcom,pmic-id = "C_E1";
-
-		vreg_l1c1: ldo1 {
-			regulator-name = "vreg_l1c1";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c1: ldo2 {
-			regulator-name = "vreg_l2c1";
-			regulator-min-microvolt = <1144000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c1: ldo3 {
-			regulator-name = "vreg_l3c1";
-			regulator-min-microvolt = <890000>;
-			regulator-max-microvolt = <980000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4c1: ldo4 {
-			regulator-name = "vreg_l4c1";
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <720000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_bob2_e0: bob2 {
+		regulator-name = "vreg_bob2_e0";
+		regulator-min-microvolt = <2540000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 	};
 
-	regulators-2 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "F_E0";
-
-		vreg_s7f0: smps7 {
-			regulator-name = "vreg_s7f0";
-			regulator-min-microvolt = <1320000>;
-			regulator-max-microvolt = <1352000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s8f0: smps8 {
-			regulator-name = "vreg_s8f0";
-			regulator-min-microvolt = <952000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s9f0: smps9 {
-			regulator-name = "vreg_s9f0";
-			regulator-min-microvolt = <1900000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f0: ldo2 {
-			regulator-name = "vreg_l2f0";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3f0: ldo3 {
-			regulator-name = "vreg_l3f0";
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <720000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4f0: ldo4 {
-			regulator-name = "vreg_l4f0";
-			regulator-min-microvolt = <1080000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_l8b0: ldo8 {
+		regulator-name = "vreg_l8b0";
+		regulator-min-microvolt = <1504000>;
+		regulator-max-microvolt = <1504000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 
-	regulators-3 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "F_E1";
-
-		vreg_s7f1: smps7 {
-			regulator-name = "vreg_s7f1";
-			regulator-min-microvolt = <300000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1f1: ldo1 {
-			regulator-name = "vreg_l1f1";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f1: ldo2 {
-			regulator-name = "vreg_l2f1";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4f1: ldo4 {
-			regulator-name = "vreg_l4f1";
-			regulator-min-microvolt = <1080000>;
-			regulator-max-microvolt = <1320000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_l12b0: ldo12 {
+		regulator-name = "vreg_l12b0";
+		regulator-min-microvolt = <1144000>;
+		regulator-max-microvolt = <1144000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 
-	regulators-4 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "H_E0";
+	vreg_l17b0: ldo17 {
+		regulator-name = "vreg_l17b0";
+		regulator-min-microvolt = <2400000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
+};
 
-		vreg_l1h0: ldo1 {
-			regulator-name = "vreg_l1h0";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+&rpmh_vregs_f_e0 {
+	vreg_l4f0: ldo4 {
+		regulator-name = "vreg_l4f0";
+		regulator-min-microvolt = <1080000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
 
-		vreg_l2h0: ldo2 {
-			regulator-name = "vreg_l2h0";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_s7f0: smps7 {
+		regulator-name = "vreg_s7f0";
+		regulator-min-microvolt = <1320000>;
+		regulator-max-microvolt = <1352000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
 
-		vreg_l3h0: ldo3 {
-			regulator-name = "vreg_l3h0";
-			regulator-min-microvolt = <320000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_s8f0: smps8 {
+		regulator-name = "vreg_s8f0";
+		regulator-min-microvolt = <952000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
+};
 
-		vreg_l4h0: ldo4 {
-			regulator-name = "vreg_l4h0";
-			regulator-min-microvolt = <1080000>;
-			regulator-max-microvolt = <1320000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+&rpmh_vregs_f_e1 {
+	vreg_s7f1: smps7 {
+		regulator-name = "vreg_s7f1";
+		regulator-min-microvolt = <300000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 };
 
@@ -446,9 +265,6 @@ &pcie4 {
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l1c1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -482,9 +298,6 @@ &pcie5 {
 };
 
 &pcie5_phy {
-	vdda-phy-supply = <&vreg_l2f0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-
 	status = "okay";
 };
 
@@ -503,9 +316,6 @@ &pcie6 {
 };
 
 &pcie6_phy {
-	vdda-phy-supply = <&vreg_l1c1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -559,26 +369,6 @@ &remoteproc_soccp {
 			"qcom/glymur/soccp_dtb.mbn";
 };
 
-&tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
-	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
-	vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
-	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
-	vdda-refgen3-1p2-supply = <&vreg_l4h0>;
-	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
-	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
-};
-
 &tlmm {
 	gpio-reserved-ranges = <4 4>, /* EC TZ Secure I3C */
 			       <10 2>, /* OOB UART */
diff --git a/arch/arm64/boot/dts/qcom/mahua-crd.dts b/arch/arm64/boot/dts/qcom/mahua-crd.dts
index 51708954f17a..8a36d0caaf9e 100644
--- a/arch/arm64/boot/dts/qcom/mahua-crd.dts
+++ b/arch/arm64/boot/dts/qcom/mahua-crd.dts
@@ -26,17 +26,16 @@ &pcie3b_phy {
 };
 
 &tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
+	/delete-property/ vdda-qrefrx4-0p9-supply;
+	/delete-property/ vdda-qrefrx5-0p9-supply;
+	/delete-property/ vdda-qreftx0-0p9-supply;
+	/delete-property/ vdda-qreftx0-1p2-supply;
+	/delete-property/ vdda-refgen4-0p9-supply;
+	/delete-property/ vdda-refgen4-1p2-supply;
+
 	vdda-qrefrpt3-0p9-supply = <&vreg_l1f1>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
 	vdda-qrefrpt5-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
 	vdda-qrefrx3-0p9-supply = <&vreg_l2h0>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
 	vdda-refgen3-0p9-supply = <&vreg_l1f1>;
 	vdda-refgen3-1p2-supply = <&vreg_l4f1>;
 };
diff --git a/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts b/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts
index 860e9ef01aa6..a77eb7565804 100644
--- a/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts
+++ b/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts
@@ -6,13 +6,6 @@
 
 #include "mahua.dtsi"
 
-#include "pmcx0102.dtsi"
-#include "pmh0101.dtsi"
-#include "pmh0110-glymur.dtsi"
-#include "pmh0104-glymur.dtsi"
-#include "pmk8850.dtsi"
-#include "smb2370.dtsi"
-
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -388,249 +381,72 @@ vreg_pmu_pcie_1p8: ldo9 {
 	};
 };
 
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pmh0101-rpmh-regulators";
-		qcom,pmic-id = "B_E0";
-
-		vreg_bob1_e0: bob1 {
-			regulator-name = "vreg_bob1_e0";
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <4224000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
-		};
-
-		vreg_bob2_e0: bob2 {
-			regulator-name = "vreg_bob2_e0";
-			regulator-min-microvolt = <2540000>;
-			regulator-max-microvolt = <3600000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
-		};
-
-		vreg_l1b0: ldo1 {
-			regulator-name = "vreg_l1b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2b0: ldo2 {
-			regulator-name = "vreg_l2b0";
-			regulator-min-microvolt = <2904000>;
-			regulator-max-microvolt = <2904000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7b0: ldo7 {
-			regulator-name = "vreg_l7b0";
-			regulator-min-microvolt = <2790000>;
-			regulator-max-microvolt = <2792000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8b0: ldo8 {
-			regulator-name = "vreg_l8b0";
-			regulator-min-microvolt = <1504000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9b0: ldo9 {
-			regulator-name = "vreg_l9b0";
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l10b0: ldo10 {
-			regulator-name = "vreg_l10b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l11b0: ldo11 {
-			regulator-name = "vreg_l11b0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l12b0: ldo12 {
-			regulator-name = "vreg_l12b0";
-			regulator-min-microvolt = <1144000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l15b0: ldo15 {
-			regulator-name = "vreg_l15b0";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-always-on;
-		};
-
-		vreg_l17b0: ldo17 {
-			regulator-name = "vreg_l17b0";
-			regulator-min-microvolt = <2400000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l18b0: ldo18 {
-			regulator-name = "vreg_l18b0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-always-on;
-		};
+&rpmh_vregs_b_e0 {
+	vreg_bob1_e0: bob1 {
+		regulator-name = "vreg_bob1_e0";
+		regulator-min-microvolt = <2200000>;
+		regulator-max-microvolt = <4224000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 	};
 
-	regulators-1 {
-		compatible = "qcom,pmcx0102-rpmh-regulators";
-		qcom,pmic-id = "C_E1";
-
-		vreg_l1c1: ldo1 {
-			regulator-name = "vreg_l1c1";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c1: ldo2 {
-			regulator-name = "vreg_l2c1";
-			regulator-min-microvolt = <1144000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c1: ldo3 {
-			regulator-name = "vreg_l3c1";
-			regulator-min-microvolt = <890000>;
-			regulator-max-microvolt = <980000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4c1: ldo4 {
-			regulator-name = "vreg_l4c1";
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <720000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_bob2_e0: bob2 {
+		regulator-name = "vreg_bob2_e0";
+		regulator-min-microvolt = <2540000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 	};
 
-	regulators-2 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "F_E0";
-
-		vreg_s7f0: smps7 {
-			regulator-name = "vreg_s7f0";
-			regulator-min-microvolt = <1320000>;
-			regulator-max-microvolt = <1352000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s8f0: smps8 {
-			regulator-name = "vreg_s8f0";
-			regulator-min-microvolt = <952000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s9f0: smps9 {
-			regulator-name = "vreg_s9f0";
-			regulator-min-microvolt = <1900000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f0: ldo2 {
-			regulator-name = "vreg_l2f0";
-			regulator-min-microvolt = <936000>;
-			regulator-max-microvolt = <936000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3f0: ldo3 {
-			regulator-name = "vreg_l3f0";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4f0: ldo4 {
-			regulator-name = "vreg_l4f0";
-			regulator-min-microvolt = <1080000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_l8b0: ldo8 {
+		regulator-name = "vreg_l8b0";
+		regulator-min-microvolt = <1504000>;
+		regulator-max-microvolt = <3304000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 
-	regulators-3 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "F_E1";
-
-		vreg_s7f1: smps7 {
-			regulator-name = "vreg_s7f1";
-			regulator-min-microvolt = <300000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1f1: ldo1 {
-			regulator-name = "vreg_l1f1";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f1: ldo2 {
-			regulator-name = "vreg_l2f1";
-			regulator-min-microvolt = <904000>;
-			regulator-max-microvolt = <904000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4f1: ldo4 {
-			regulator-name = "vreg_l4f1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_l12b0: ldo12 {
+		regulator-name = "vreg_l12b0";
+		regulator-min-microvolt = <1144000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 
-	regulators-4 {
-		compatible = "qcom,pmh0110-rpmh-regulators";
-		qcom,pmic-id = "H_E0";
+	vreg_l17b0: ldo17 {
+		regulator-name = "vreg_l17b0";
+		regulator-min-microvolt = <2400000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
+};
 
-		vreg_l1h0: ldo1 {
-			regulator-name = "vreg_l1h0";
-			regulator-min-microvolt = <936000>;
-			regulator-max-microvolt = <936000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+&rpmh_vregs_f_e0 {
+	vreg_l4f0: ldo4 {
+		regulator-name = "vreg_l4f0";
+		regulator-min-microvolt = <1080000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
 
-		vreg_l2h0: ldo2 {
-			regulator-name = "vreg_l2h0";
-			regulator-min-microvolt = <832000>;
-			regulator-max-microvolt = <832000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_s7f0: smps7 {
+		regulator-name = "vreg_s7f0";
+		regulator-min-microvolt = <1320000>;
+		regulator-max-microvolt = <1352000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
 
-		vreg_l3h0: ldo3 {
-			regulator-name = "vreg_l3h0";
-			regulator-min-microvolt = <320000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+	vreg_s8f0: smps8 {
+		regulator-name = "vreg_s8f0";
+		regulator-min-microvolt = <952000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+	};
+};
 
-		vreg_l4h0: ldo4 {
-			regulator-name = "vreg_l4h0";
-			regulator-min-microvolt = <1080000>;
-			regulator-max-microvolt = <1320000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+&rpmh_vregs_f_e1 {
+	vreg_s7f1: smps7 {
+		regulator-name = "vreg_s7f1";
+		regulator-min-microvolt = <300000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 };
 
@@ -739,7 +555,6 @@ &lpass_vamacro {
 	pinctrl-0 = <&dmic01_default>;
 	pinctrl-names = "default";
 	qcom,dmic-sample-rate = <4800000>;
-	vdd-micb-supply = <&vreg_l1b0>;
 };
 
 &mdss {
@@ -796,9 +611,6 @@ &mdss_dp3_out {
 };
 
 &mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l2f1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -811,9 +623,6 @@ &pcie4 {
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l1c1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -848,9 +657,6 @@ &pcie5 {
 };
 
 &pcie5_phy {
-	vdda-phy-supply = <&vreg_l2f0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-
 	status = "okay";
 };
 
@@ -870,9 +676,6 @@ &pcie6 {
 };
 
 &pcie6_phy {
-	vdda-phy-supply = <&vreg_l1c1>;
-	vdda-pll-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -948,36 +751,9 @@ right_spkr: speaker@0,1 {
 	};
 };
 
-&smb2370_j_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b0>;
-	vdd3-supply = <&vreg_l7b0>;
-};
-
-&smb2370_k_e2_eusb2_repeater {
-	vdd18-supply = <&vreg_l15b0>;
-	vdd3-supply = <&vreg_l7b0>;
-};
-
 &tcsr {
-	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
 	vdda-qrefrpt5-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
-	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
 	vdda-qrefrx3-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
-	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
-	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
-	vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
-	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
-	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
-	vdda-refgen3-1p2-supply = <&vreg_l4h0>;
-	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
-	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
 };
 
 &tlmm {
@@ -1149,19 +925,12 @@ &usb_0_dwc3_hs {
 };
 
 &usb_0_hsphy {
-	vdd-supply = <&vreg_l3f0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&smb2370_j_e2_eusb2_repeater>;
 
 	status = "okay";
 };
 
 &usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l3f0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l2f0>;
-
 	status = "okay";
 };
 
@@ -1178,19 +947,12 @@ &usb_1_dwc3_hs {
 };
 
 &usb_1_hsphy {
-	vdd-supply = <&vreg_l3f0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&smb2370_k_e2_eusb2_repeater>;
 
 	status = "okay";
 };
 
 &usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l1h0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l2f0>;
-
 	status = "okay";
 };
 
@@ -1203,36 +965,22 @@ &usb_mp {
 };
 
 &usb_mp_hsphy0 {
-	vdd-supply = <&vreg_l2h0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&ptn3222_0>;
 
 	status = "okay";
 };
 
 &usb_mp_hsphy1 {
-	vdd-supply = <&vreg_l2h0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&ptn3222_1>;
 //USB-A..
 	status = "okay";
 };
 
 &usb_mp_qmpphy0 {
-	vdda-phy-supply = <&vreg_l2h0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
 &usb_mp_qmpphy1 {
-	vdda-phy-supply = <&vreg_l2h0>;
-	vdda-pll-supply = <&vreg_l4h0>;
-	refgen-supply = <&vreg_l4f1>;
-
 	status = "okay";
 };
 
@@ -1243,9 +991,6 @@ &usb_hs {
 };
 
 &usb_hs_phy {
-	vdd-supply = <&vreg_l2h0>;
-	vdda12-supply = <&vreg_l4h0>;
-
 	phys = <&ptn3222_cam>;
 
 	status = "okay";
@@ -1263,9 +1008,6 @@ &usb_2 {
 };
 
 &usb_2_hsphy {
-	vdd-supply = <&vreg_l4c1>;
-	vdda12-supply = <&vreg_l4f1>;
-
 	phys = <&ptn3222_fpr>;
 
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/mahua.dtsi b/arch/arm64/boot/dts/qcom/mahua.dtsi
index a59c5ed7b48e..16f62040aa84 100644
--- a/arch/arm64/boot/dts/qcom/mahua.dtsi
+++ b/arch/arm64/boot/dts/qcom/mahua.dtsi
@@ -5,6 +5,7 @@
 
 /* Mahua is heavily based on Glymur, with some meaningful differences */
 #include "glymur.dtsi"
+#include "glymur-cob.dtsi"
 
 /delete-node/ &bwmon_cluster2;
 /delete-node/ &cluster2_pd;
@@ -399,4 +400,3 @@ &tsens4 {
 &tsens5 {
 	#qcom,sensors = <15>;
 };
-

-- 
2.56.0


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* Re: [PATCH 2/3] arm64: dts: qcom: Consolidate Glymur CoB power grid
  2026-10-28 20:04 ` [PATCH 2/3] arm64: dts: qcom: Consolidate Glymur CoB power grid Konrad Dybcio
@ 2026-10-28 20:17   ` sashiko-bot
  2026-10-29  8:51   ` Abel Vesa
  1 sibling, 0 replies; 10+ messages in thread
From: sashiko-bot @ 2026-10-28 20:17 UTC (permalink / raw)
  To: Konrad Dybcio; +Cc: devicetree, robh, conor+dt

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [High] arm64: dts: qcom: invalid step voltages on vreg_l7b0 and vreg_s9f0
- [Medium] arm64: dts: qcom: yoga-slim7x retains swapped USB QMP PHY supplies
- [Medium] arm64: dts: qcom: mahua-tcsr QREF fixups missing from mahua.dtsi
--

commit e05c2da4bef582e863ac9bb6fa079eb8effdd101
Author: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

arm64: dts: qcom: Consolidate Glymur CoB power grid

This commit factors out the common PMIC includes, RPMH regulator definitions,
and on-SoC peripheral supply properties for Glymur CoB devices into a shared
glymur-cob.dtsi file and updates the board and Mahua device trees to use it.

> diff --git a/arch/arm64/boot/dts/qcom/glymur-cob.dtsi b/arch/arm64/boot/dts/qcom/glymur-cob.dtsi
> new file mode 100644
> index 0000000000000..8b4ba1d384a0d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/glymur-cob.dtsi
> @@ -0,0 +1,310 @@
[ ... ]
> +&apps_rsc {
> +	rpmh_vregs_b_e0: regulators-0 {
> +		compatible = "qcom,pmh0101-rpmh-regulators";
> +		qcom,pmic-id = "B_E0";
> +
> +		vreg_l1b0: ldo1 {
> +			regulator-name = "vreg_l1b0";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l7b0: ldo7 {
> +			regulator-name = "vreg_l7b0";
> +			regulator-min-microvolt = <3100000>;
> +			regulator-max-microvolt = <3100000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
[ ... ]
> +	rpmh_vregs_f_e0: regulators-2 {
> +		compatible = "qcom,pmh0110-rpmh-regulators";
> +		qcom,pmic-id = "F_E0";
> +
> +		vreg_l2f0: ldo2 {
> +			regulator-name = "vreg_l2f0";
> +			regulator-min-microvolt = <944000>;
> +			regulator-max-microvolt = <944000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l3f0: ldo3 {
> +			regulator-name = "vreg_l3f0";
> +			regulator-min-microvolt = <912000>;
> +			regulator-max-microvolt = <912000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		/* Voltage input for PMCX0104 */
> +		vreg_s9f0: smps9 {
> +			regulator-name = "vreg_s9f0";
> +			regulator-min-microvolt = <1900000>;
> +			regulator-max-microvolt = <1900000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};

[Severity: High]
Will setting regulator-min-microvolt == regulator-max-microvolt to 3100000 on
vreg_l7b0 (ldo7 on pmh0101) and 1900000 on vreg_s9f0 (smps9 on pmh0110) cause
rpmh_regulator_probe() to fail with -EINVAL for both the B_E0 and F_E0 PMIC
regulator nodes?

In drivers/regulator/qcom-rpmh-regulator.c, pmh0101_vreg_data maps ldo7 to
pmic5_pldo530_mvp300:

	static const struct rpmh_vreg_hw_data pmic5_pldo530_mvp300 = {
		.regulator_type = VRM,
		.ops = &rpmh_regulator_vrm_drms_ops,
		.voltage_ranges = (struct linear_range[]) {
			REGULATOR_LINEAR_RANGE(1504000, 0, 255, 8000),
		},

Because (3100000 - 1504000) / 8000 is 199.5, 3100000 uV lies halfway between
the valid hardware steps 3096000 uV and 3104000 uV.

Similarly, pmh0110_vreg_data maps smps9 to pmic5_ftsmps530:

	static const struct rpmh_vreg_hw_data pmic5_ftsmps530 = {
		.regulator_type = VRM,
		.ops = &rpmh_regulator_vrm_ops,
		.voltage_ranges = (struct linear_range[]) {
			REGULATOR_LINEAR_RANGE(252000, 0, 305, 4000),
			REGULATOR_LINEAR_RANGE(1480000, 306, 464, 8000),
		},

Because (1900000 - 1480000) / 8000 is 52.5, 1900000 uV lies halfway between
the valid hardware steps 1896000 uV and 1904000 uV (previously vreg_s9f0 used
a range of 1900000 to 2000000 uV, which contained valid steps).

When rpmh_regulator_probe() -> rpmh_regulator_init_vreg() ->
devm_regulator_register() -> set_machine_constraints() ->
machine_constraints_voltage() checks a fixed constraint where cmin == cmax is
not an exact hardware step, clamping produces max_uV < min_uV (3096000 <
3104000 for vreg_l7b0, and 1896000 < 1904000 for vreg_s9f0) and returns
-EINVAL, aborting registration of the entire PMIC regulator block in
rpmh_regulator_probe():

	ret = rpmh_regulator_init_vreg(vreg, dev, node, pmic_id,
					vreg_data);
	if (ret < 0)
		return ret;

> diff --git a/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts
> index 56c22daab0569..a8580499e7093 100644
> --- a/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts
> +++ b/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts
[ ... ]
> @@ -1142,9 +928,6 @@ &usb_0_dwc3_hs {
>  };
>  
>  &usb_0_hsphy {
> -	vdd-supply = <&vreg_l3f0>;
> -	vdda12-supply = <&vreg_l4h0>;
> -
>  	phys = <&smb2370_j_e2_eusb2_repeater>;
>  
>  	status = "okay";
> @@ -1171,9 +954,6 @@ &usb_1_dwc3_hs {
>  };
>  
>  &usb_1_hsphy {
> -	vdd-supply = <&vreg_l3f0>;
> -	vdda12-supply = <&vreg_l4h0>;
> -
>  	phys = <&smb2370_k_e2_eusb2_repeater>;
>  
>  	status = "okay";
> @@ -1200,9 +980,6 @@ &usb_2_dwc3_hs {
>  };
>  
>  &usb_2_hsphy {
> -	vdd-supply = <&vreg_l4c1>;
> -	vdda12-supply = <&vreg_l4f1>;
> -
>  	phys = <&smb2370_l_e2_eusb2_repeater>;
>  
>  	status = "okay";

[Severity: Medium]
Should the local supply properties on &usb_0_qmpphy, &usb_1_qmpphy, and
&usb_2_qmpphy in arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts also
be removed so they inherit the consolidated definitions from glymur-cob.dtsi?

Right after each of the hsphy nodes above, glymur-lenovo-yoga-slim7x.dts still
has:

	&usb_0_qmpphy {
		vdda-phy-supply = <&vreg_l4h0>;
		vdda-pll-supply = <&vreg_l3f0>;
		refgen-supply = <&vreg_l2f0>;

		status = "okay";
	};
	...
	&usb_1_qmpphy {
		vdda-phy-supply = <&vreg_l4h0>;
		vdda-pll-supply = <&vreg_l1h0>;
		refgen-supply = <&vreg_l2f0>;

		status = "okay";
	};
	...
	&usb_2_qmpphy {
		vdda-phy-supply = <&vreg_l4f1>;
		vdda-pll-supply = <&vreg_l4c1>;
		refgen-supply = <&vreg_l1c1>;

		status = "okay";
	};

Those local properties override glymur-cob.dtsi with the 1.2 V rails
(vreg_l4h0, vreg_l4f1) and 0.9 V rails (vreg_l3f0, vreg_l1h0, vreg_l4c1)
swapped between vdda-phy-supply and vdda-pll-supply, and with vreg_l1c1 on
&usb_2_qmpphy refgen-supply.

> diff --git a/arch/arm64/boot/dts/qcom/mahua-crd.dts b/arch/arm64/boot/dts/qcom/mahua-crd.dts
> index 51708954f17a7..8a36d0caaf9e2 100644
> --- a/arch/arm64/boot/dts/qcom/mahua-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/mahua-crd.dts
> @@ -26,17 +26,16 @@ &pcie3b_phy {
>  };
>  
>  &tcsr {
> -	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
> -	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
> -	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
> +	/delete-property/ vdda-qrefrx4-0p9-supply;
> +	/delete-property/ vdda-qrefrx5-0p9-supply;
> +	/delete-property/ vdda-qreftx0-0p9-supply;
> +	/delete-property/ vdda-qreftx0-1p2-supply;
> +	/delete-property/ vdda-refgen4-0p9-supply;
> +	/delete-property/ vdda-refgen4-1p2-supply;
> +
>  	vdda-qrefrpt3-0p9-supply = <&vreg_l1f1>;
> -	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
>  	vdda-qrefrpt5-0p9-supply = <&vreg_l2h0>;
> -	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
> -	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
> -	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
>  	vdda-qrefrx3-0p9-supply = <&vreg_l2h0>;
> -	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
>  	vdda-refgen3-0p9-supply = <&vreg_l1f1>;
>  	vdda-refgen3-1p2-supply = <&vreg_l4f1>;
>  };
> diff --git a/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts b/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts
> index 860e9ef01aa6f..a77eb75658047 100644
> --- a/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts
> +++ b/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts
[ ... ]
> @@ -948,36 +751,9 @@ right_spkr: speaker@0,1 {
>  	};
>  };
>  
> -&smb2370_j_e2_eusb2_repeater {
> -	vdd18-supply = <&vreg_l15b0>;
> -	vdd3-supply = <&vreg_l7b0>;
> -};
> -
> -&smb2370_k_e2_eusb2_repeater {
> -	vdd18-supply = <&vreg_l15b0>;
> -	vdd3-supply = <&vreg_l7b0>;
> -};
> -
>  &tcsr {
> -	vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
> -	vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
> -	vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
> -	vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
> -	vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
>  	vdda-qrefrpt5-0p9-supply = <&vreg_l2h0>;
> -	vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
> -	vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
> -	vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
>  	vdda-qrefrx3-0p9-supply = <&vreg_l2h0>;
> -	vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
> -	vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
> -	vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
> -	vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
> -	vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
> -	vdda-refgen3-0p9-supply = <&vreg_l2f0>;
> -	vdda-refgen3-1p2-supply = <&vreg_l4h0>;
> -	vdda-refgen4-0p9-supply = <&vreg_l1f1>;
> -	vdda-refgen4-1p2-supply = <&vreg_l4f1>;
>  };
[ ... ]
> diff --git a/arch/arm64/boot/dts/qcom/mahua.dtsi b/arch/arm64/boot/dts/qcom/mahua.dtsi
> index a59c5ed7b48e7..16f62040aa84b 100644
> --- a/arch/arm64/boot/dts/qcom/mahua.dtsi
> +++ b/arch/arm64/boot/dts/qcom/mahua.dtsi
> @@ -5,6 +5,7 @@
>  
>  /* Mahua is heavily based on Glymur, with some meaningful differences */
>  #include "glymur.dtsi"
> +#include "glymur-cob.dtsi"

[Severity: Medium]
Since mahua.dtsi now includes glymur-cob.dtsi and sets &tcsr compatible to
"qcom,mahua-tcsr", should the Mahua-specific &tcsr property deletions and
supply overrides in mahua-crd.dts live in mahua.dtsi (or a Mahua CoB dtsi)
instead?

With those &tcsr changes placed only in mahua-crd.dts,
mahua-lenovo-thinkpad-t14s-gen7-lcd.dts only overrides vdda-qrefrpt5-0p9-supply
and vdda-qrefrx3-0p9-supply, leaving it with Glymur's refgen3 and qrefrpt3
supplies (vreg_l2f0, vreg_l4h0, vreg_l2h0 instead of vreg_l1f1 and vreg_l4f1)
as well as the unused Glymur-only qrefrx4, qrefrx5, qreftx0, and refgen4
properties from glymur-cob.dtsi.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261028-topic-sip_cob-v1-0-80ab6704aca3@oss.qualcomm.com?part=2

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 2/3] arm64: dts: qcom: Consolidate Glymur CoB power grid
  2026-10-28 20:04 ` [PATCH 2/3] arm64: dts: qcom: Consolidate Glymur CoB power grid Konrad Dybcio
  2026-10-28 20:17   ` sashiko-bot
@ 2026-10-29  8:51   ` Abel Vesa
  1 sibling, 0 replies; 10+ messages in thread
From: Abel Vesa @ 2026-10-29  8:51 UTC (permalink / raw)
  To: Konrad Dybcio
  Cc: Bjorn Andersson, Abel Vesa, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Dmitry Baryshkov, Gopikrishna Garmidi,
	linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio

On 26-10-28 21:04:25, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> 
> The power grid is partly defined by connections to the on-SoC
> peripherals, which (due to various reasons, electrical and practical)
> are well-defined for each PMIC configuration. Factor out the common
> bits for Glymur CoB devices.
> 
> Because some DTs (mostly the CRD) disagreed about certain values, I
> made sure to look up the desired one for each of these common rails,
> they are now set as expected.
> 
> This enables one to take care of most required vreg settings with a
> single #include.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

With the concerns from sashiko addressed, this looks good to me, so:

Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 3/3] arm64: dts: qcom: glymur-crd: Drop L4F0
  2026-10-28 20:04 [PATCH 0/3] Commonize Glymur regulator settings for fixed rails Konrad Dybcio
  2026-10-28 20:04 ` [PATCH 1/3] arm64: dts: qcom: Unify Glymur/Mahua regulator handles Konrad Dybcio
  2026-10-28 20:04 ` [PATCH 2/3] arm64: dts: qcom: Consolidate Glymur CoB power grid Konrad Dybcio
@ 2026-10-28 20:04 ` Konrad Dybcio
  2026-10-29  8:37   ` Abel Vesa
  2026-10-29  9:39 ` [PATCH v1 0/3] Commonize Glymur regulator settings for fixed rails Sivansh Gupta
  3 siblings, 1 reply; 10+ messages in thread
From: Konrad Dybcio @ 2026-10-28 20:04 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Dmitry Baryshkov,
	Gopikrishna Garmidi
  Cc: linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio

From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

This is VDD_LPI_MX, already controlled by RPMH as an ARC/RPMHPD.
Drop it.

Fixes: a5ad8a8e473c ("arm64: dts: qcom: Commonize Glymur CRD DTSI")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
index 422ed0308147..422b3778c22a 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
@@ -390,13 +390,6 @@ vreg_l17b0: ldo17 {
 };
 
 &rpmh_vregs_f_e0 {
-	vreg_l4f0: ldo4 {
-		regulator-name = "vreg_l4f0";
-		regulator-min-microvolt = <1080000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-	};
-
 	vreg_s7f0: smps7 {
 		regulator-name = "vreg_s7f0";
 		regulator-min-microvolt = <1320000>;

-- 
2.56.0


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* Re: [PATCH 3/3] arm64: dts: qcom: glymur-crd: Drop L4F0
  2026-10-28 20:04 ` [PATCH 3/3] arm64: dts: qcom: glymur-crd: Drop L4F0 Konrad Dybcio
@ 2026-10-29  8:37   ` Abel Vesa
  0 siblings, 0 replies; 10+ messages in thread
From: Abel Vesa @ 2026-10-29  8:37 UTC (permalink / raw)
  To: Konrad Dybcio
  Cc: Bjorn Andersson, Abel Vesa, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Dmitry Baryshkov, Gopikrishna Garmidi,
	linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio

On 26-10-28 21:04:26, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> 
> This is VDD_LPI_MX, already controlled by RPMH as an ARC/RPMHPD.
> Drop it.
> 
> Fixes: a5ad8a8e473c ("arm64: dts: qcom: Commonize Glymur CRD DTSI")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v1 0/3] Commonize Glymur regulator settings for fixed rails
  2026-10-28 20:04 [PATCH 0/3] Commonize Glymur regulator settings for fixed rails Konrad Dybcio
                   ` (2 preceding siblings ...)
  2026-10-28 20:04 ` [PATCH 3/3] arm64: dts: qcom: glymur-crd: Drop L4F0 Konrad Dybcio
@ 2026-10-29  9:39 ` Sivansh Gupta
  2026-10-30 10:46   ` Konrad Dybcio
  3 siblings, 1 reply; 10+ messages in thread
From: Sivansh Gupta @ 2026-10-29  9:39 UTC (permalink / raw)
  To: konradybcio
  Cc: abelvesa, andersson, conor+dt, devicetree, dmitry.baryshkov,
	gopikrishna.garmidi, konrad.dybcio, krzk+dt, linux-arm-msm,
	linux-kernel, robh

Hey Konrad,
> Certain rails are predefined and will ALWAYS have to be the same for a
> given PMIC configuration (due to electrical and other requirements).
> Factor these out to remove a layer of pain when creating DTs and let
> one have a better way to reason about the settings across the platform.
> 
> Glymur-SiP will be the next target after/if this is accepted

This series conflicts with mine.
I attempted to rebase your series on top of mine, but it didnt apply
cleanly, hence wasnt able to boot test it.

Link: https://lore.kernel.org/all/20261027114955.1266499-1-sivansh.gupta@oss.qualcomm.com/

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v1 0/3] Commonize Glymur regulator settings for fixed rails
  2026-10-29  9:39 ` [PATCH v1 0/3] Commonize Glymur regulator settings for fixed rails Sivansh Gupta
@ 2026-10-30 10:46   ` Konrad Dybcio
  0 siblings, 0 replies; 10+ messages in thread
From: Konrad Dybcio @ 2026-10-30 10:46 UTC (permalink / raw)
  To: Sivansh Gupta, konradybcio
  Cc: abelvesa, andersson, conor+dt, devicetree, dmitry.baryshkov,
	gopikrishna.garmidi, krzk+dt, linux-arm-msm, linux-kernel, robh

On 10/29/26 10:39 AM, Sivansh Gupta wrote:
> Hey Konrad,
>> Certain rails are predefined and will ALWAYS have to be the same for a
>> given PMIC configuration (due to electrical and other requirements).
>> Factor these out to remove a layer of pain when creating DTs and let
>> one have a better way to reason about the settings across the platform.
>>
>> Glymur-SiP will be the next target after/if this is accepted
> 
> This series conflicts with mine.
> I attempted to rebase your series on top of mine, but it didnt apply
> cleanly, hence wasnt able to boot test it.
> 
> Link: https://lore.kernel.org/all/20261027114955.1266499-1-sivansh.gupta@oss.qualcomm.com/

I'll rebase the v2 on top.

Konrad

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2026-10-30 10:46 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-10-28 20:04 [PATCH 0/3] Commonize Glymur regulator settings for fixed rails Konrad Dybcio
2026-10-28 20:04 ` [PATCH 1/3] arm64: dts: qcom: Unify Glymur/Mahua regulator handles Konrad Dybcio
2026-10-29  8:36   ` Abel Vesa
2026-10-28 20:04 ` [PATCH 2/3] arm64: dts: qcom: Consolidate Glymur CoB power grid Konrad Dybcio
2026-10-28 20:17   ` sashiko-bot
2026-10-29  8:51   ` Abel Vesa
2026-10-28 20:04 ` [PATCH 3/3] arm64: dts: qcom: glymur-crd: Drop L4F0 Konrad Dybcio
2026-10-29  8:37   ` Abel Vesa
2026-10-29  9:39 ` [PATCH v1 0/3] Commonize Glymur regulator settings for fixed rails Sivansh Gupta
2026-10-30 10:46   ` Konrad Dybcio

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.