* [PATCH] maintainers: updated for Intel drivers
@ 2024-01-17 10:17 qiming.yang
2024-01-18 5:21 ` Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example James Tervit
2024-01-29 16:49 ` [PATCH] maintainers: updated for Intel drivers Thomas Monjalon
0 siblings, 2 replies; 4+ messages in thread
From: qiming.yang @ 2024-01-17 10:17 UTC (permalink / raw)
To: dev; +Cc: Qiming Yang
From: Qiming Yang <qiming.yang@intel.com>
Remove the maintainer that no longer work.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
---
MAINTAINERS | 2 --
1 file changed, 2 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 0d1c8126e3..230549ca94 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -749,7 +749,6 @@ F: doc/guides/nics/features/e1000.ini
F: doc/guides/nics/features/igb*.ini
Intel ixgbe
-M: Qiming Yang <qiming.yang@intel.com>
M: Wenjun Wu <wenjun1.wu@intel.com>
T: git://dpdk.org/next/dpdk-next-net-intel
F: drivers/net/ixgbe/
@@ -783,7 +782,6 @@ F: drivers/common/iavf/
F: doc/guides/nics/features/iavf*.ini
Intel ice
-M: Qiming Yang <qiming.yang@intel.com>
M: Qi Zhang <qi.z.zhang@intel.com>
T: git://dpdk.org/next/dpdk-next-net-intel
F: drivers/net/ice/
--
2.34.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example
2024-01-17 10:17 [PATCH] maintainers: updated for Intel drivers qiming.yang
@ 2024-01-18 5:21 ` James Tervit
2024-01-18 15:06 ` James Tervit
2024-01-29 16:49 ` [PATCH] maintainers: updated for Intel drivers Thomas Monjalon
1 sibling, 1 reply; 4+ messages in thread
From: James Tervit @ 2024-01-18 5:21 UTC (permalink / raw)
To: dev@dpdk.org
[-- Attachment #1: Type: text/plain, Size: 9387 bytes --]
Dear DPDK Folks,
I am following the latest build of home gateway https://s3-docs.fd.io/vpp/23.06/usecases/home_gateway.html for testing and development.
Running
Linux PXC-SM-002 5.15.0-91-generic #101-Ubuntu
vpp/jammy,now 23.10-release amd64 [installed]
PRETTY_NAME="Ubuntu 22.04.3 LTS"
NAME="Ubuntu"
VERSION_ID="22.04"
VERSION="22.04.3 LTS (Jammy Jellyfish)"
In my vpp startup.conf, which is calling setup.gate and, in turn, runs setup.tmpl I get an error on systemd in bold below.
Jan 18 04:23:34 PXC-SM-002 vpp[224896]: set interface l2 bridge: unknown interface `GigabitEthernetb7/0/0 1'
Jan 18 04:23:34 PXC-SM-002 vpp[224896]: exec: CLI line error: GigabitEthernetb7/0/0 1 (this is related to setup.tmpl section)
Jan 18 04:23:34 PXC-SM-002 vpp[224896]: exec: CLI line error:
setup.gate runs
define HOSTNAME Gate-001
define TRUNK GigabitEthernet65/0/0
comment { Specific MAC address yields a constant IP address }
define TRUNK_MACADDR 3c:ec:ef:da:89:58
define BVI_MACADDR 3c:ce:fe:ad:01:02
comment { inside subnet 192.168.<inside_subnet>.0/24 }
define INSIDE_SUBNET 1
comment { Adjust as needed to match PCI addresses of inside network ports }
define INSIDE_PORT1 GigabitEthernet65/0/1
define INSIDE_PORT2 GigabitEthernet65/0/2
define INSIDE_PORT3 GigabitEthernet65/0/3
define INSIDE_PORT4 GigabitEthernetb7/0/0
define INSIDE_PORT5 GigabitEthernetb7/0/1
define INSIDE_PORT6 GigabitEthernetb7/0/3
comment { feature selections }
define FEATURE_ADL uncomment
define FEATURE_NAT44 uncomment
define FEATURE_CNAT comment
define FEATURE_DNS comment
define FEATURE_IP6 comment
define FEATURE_IKE_RESPONDER comment
define FEATURE_MACTIME uncomment
define FEATURE_OVPN uncomment
define FEATURE_MODEM_ROUTE uncomment
exec /home/pxcghost/VPP/pxc-gate/setup.tmpl
The setup.tmpl tries to create inside ports and, for some reason, fails on one port and stops processing.
show macro
set int mac address $(TRUNK) $(TRUNK_MACADDR)
set dhcp client intfc $(TRUNK) hostname $(HOSTNAME)
set int state $(TRUNK) up
bvi create instance 0
set int mac address bvi0 $(BVI_MACADDR)
set int l2 bridge bvi0 1 bvi
set int ip address bvi0 192.168.$(INSIDE_SUBNET).1/24
set int state bvi0 up
set int l2 bridge $(INSIDE_PORT1) 1
set int state $(INSIDE_PORT1) up
set int l2 bridge $(INSIDE_PORT2) 1
set int state $(INSIDE_PORT2) up
set int l2 bridge $(INSIDE_PORT3) 1
set int state $(INSIDE_PORT3) up
set int l2 bridge $(INSIDE_PORT4) 1
set int state $(INSIDE_PORT4) up
set int l2 bridge $(INSIDE_PORT5) 1
set int state $(INSIDE_PORT5) up
set int l2 bridge $(INSIDE_PORT6) 1
set int state $(INSIDE_PORT6) up
comment { dhcp server and host-stack access }
create tap host-if-name lstack host-ip4-addr 192.168.$(INSIDE_SUBNET).2/24 host-ip4-gw 192.168.$(INSIDE_SUBNET).1
set int l2 bridge tap0 1
set int state tap0 up
service restart isc-dhcp-server
$(FEATURE_ADL) { bin adl_interface_enable_disable $(TRUNK) }
$(FEATURE_ADL) { ip table 1 }
$(FEATURE_ADL) { ip route add table 1 0.0.0.0/0 via local }
$(FEATURE_NAT44) { nat44 forwarding enable }
$(FEATURE_NAT44) { nat44 plugin enable sessions 63000 }
$(FEATURE_NAT44) { nat44 add interface address $(TRUNK) }
$(FEATURE_NAT44) { set interface nat44 in bvi0 out $(TRUNK) }
comment { iPhones seem to need lots of RA messages... }
$(FEATURE_IP6) { ip6 nd bvi0 ra-managed-config-flag ra-other-config-flag ra-interval 30 20 ra-lifetime 180 }
comment { ip6 nd bvi0 prefix 0::0/0 ra-lifetime 100000 }
comment { if using the mactime plugin, configure it }
$(FEATURE_MACTIME) { bin mactime_add_del_range name roku mac 3c:ec:ef:da:89:58 allow-static }
$(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT1) }
$(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT2) }
$(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT3) }
$(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT4) }
$(FEATURE_MODEM_ROUTE) { ip route add 192.168.1.1/23 via $(TRUNK) }
for some reason, port4 fails as per the system, and I think it fails on the DHCP part of the script; any pointers are appreciated. I can bind ports and unbind back to kernel with no problem, and I can see the interfaces inside vpp and bvi look ok.
sudo vppctl show interface, ip addresses not assigned as I think that’s because the script doesn’t process the lstack and dhcp portion due to crashing.
Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
GigabitEthernet65/0/0 1 up 9000/0/0/0 rx packets 585
rx bytes 72405
tx packets 3
tx bytes 1002
drops 585
ip4 228
ip6 26
GigabitEthernet65/0/1 2 up 9000/0/0/0
GigabitEthernet65/0/2 3 up 9000/0/0/0
GigabitEthernet65/0/3 4 up 9000/0/0/0
TenGigabitEthernetb7/0/0 5 down 9000/0/0/0
TenGigabitEthernetb7/0/1 6 down 9000/0/0/0
TenGigabitEthernetb7/0/3 7 down 9000/0/0/0
bvi0 8 up 9000/0/0/0
local0 0 down 0/0/0/0
Network devices using DPDK-compatible driver
============================================
0000:65:00.0 'I350 Gigabit Network Connection 1521' drv=vfio-pci unused=igb,igb_uio,uio_pci_generic
0000:65:00.1 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic
0000:65:00.2 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic
0000:65:00.3 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic
0000:b7:00.0 'Ethernet Connection X722 for 10GBASE-T 37d2' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic
0000:b7:00.1 'Ethernet Connection X722 for 10GBASE-T 37d2' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic
0000:b7:00.3 'Ethernet Connection X722 for 10GbE SFP+ 37d0' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic
Network devices using kernel driver
===================================
0000:b7:00.2 'Ethernet Connection X722 for 10GbE SFP+ 37d0' if=eno7 drv=i40e unused=igb_uio,vfio-pci,uio_pci_generic *Active*
No 'Baseband' devices detected
==============================
Crypto devices using kernel driver
==================================
0000:b5:00.0 'C62x Chipset QuickAssist Technology 37c8' drv=c6xx unused=qat_c62x,igb_uio,vfio-pci,uio_pci_generic
0000:b6:00.0 'C62x Chipset QuickAssist Technology 37c8' drv=c6xx unused=qat_c62x,igb_uio,vfio-pci,uio_pci_generic
DMA devices using kernel driver
===============================
0000:00:04.0 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.1 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.2 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.3 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.4 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.5 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.6 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.7 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
No 'Eventdev' devices detected
==============================
No 'Mempool' devices detected
=============================
No 'Compress' devices detected
==============================
No 'Misc (rawdev)' devices detected
===================================
No 'Regex' devices detected
Bus info Device Class Description
=======================================================
pci@0000:65:00.0<mailto:pci@0000:65:00.0> network I350 Gigabit Network Connection
pci@0000:65:00.1<mailto:pci@0000:65:00.1> network I350 Gigabit Network Connection
pci@0000:65:00.2<mailto:pci@0000:65:00.2> network I350 Gigabit Network Connection
pci@0000:65:00.3<mailto:pci@0000:65:00.3> network I350 Gigabit Network Connection
pci@0000:b7:00.0<mailto:pci@0000:b7:00.0> network Ethernet Connection X722 for 10GBASE-T
pci@0000:b7:00.1<mailto:pci@0000:b7:00.1> network Ethernet Connection X722 for 10GBASE-T
pci@0000:b7:00.2<mailto:pci@0000:b7:00.2> eno7 network Ethernet Connection X722 for 10GbE SFP+
pci@0000:b7:00.3<mailto:pci@0000:b7:00.3> network Ethernet Connection X722 for 10GbE SFP+
eno7 is reserved to allow me remote access on kernel.
Any pointers greatly appreciated
[-- Attachment #2: Type: text/html, Size: 30731 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example
2024-01-18 5:21 ` Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example James Tervit
@ 2024-01-18 15:06 ` James Tervit
0 siblings, 0 replies; 4+ messages in thread
From: James Tervit @ 2024-01-18 15:06 UTC (permalink / raw)
To: dev@dpdk.org
[-- Attachment #1: Type: text/plain, Size: 9692 bytes --]
After debugging this, I found a spurious port, which was renamed, and it all started working.
Thanks
From: James Tervit <James.Tervit@ewitech.co.uk>
Date: Thursday, 18 January 2024 at 13:22
To: dev@dpdk.org <dev@dpdk.org>
Subject: Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example
Dear DPDK Folks,
I am following the latest build of home gateway https://s3-docs.fd.io/vpp/23.06/usecases/home_gateway.html for testing and development.
Running
Linux PXC-SM-002 5.15.0-91-generic #101-Ubuntu
vpp/jammy,now 23.10-release amd64 [installed]
PRETTY_NAME="Ubuntu 22.04.3 LTS"
NAME="Ubuntu"
VERSION_ID="22.04"
VERSION="22.04.3 LTS (Jammy Jellyfish)"
In my vpp startup.conf, which is calling setup.gate and, in turn, runs setup.tmpl I get an error on systemd in bold below.
Jan 18 04:23:34 PXC-SM-002 vpp[224896]: set interface l2 bridge: unknown interface `GigabitEthernetb7/0/0 1'
Jan 18 04:23:34 PXC-SM-002 vpp[224896]: exec: CLI line error: GigabitEthernetb7/0/0 1 (this is related to setup.tmpl section)
Jan 18 04:23:34 PXC-SM-002 vpp[224896]: exec: CLI line error:
setup.gate runs
define HOSTNAME Gate-001
define TRUNK GigabitEthernet65/0/0
comment { Specific MAC address yields a constant IP address }
define TRUNK_MACADDR 3c:ec:ef:da:89:58
define BVI_MACADDR 3c:ce:fe:ad:01:02
comment { inside subnet 192.168.<inside_subnet>.0/24 }
define INSIDE_SUBNET 1
comment { Adjust as needed to match PCI addresses of inside network ports }
define INSIDE_PORT1 GigabitEthernet65/0/1
define INSIDE_PORT2 GigabitEthernet65/0/2
define INSIDE_PORT3 GigabitEthernet65/0/3
define INSIDE_PORT4 GigabitEthernetb7/0/0
define INSIDE_PORT5 GigabitEthernetb7/0/1
define INSIDE_PORT6 GigabitEthernetb7/0/3
comment { feature selections }
define FEATURE_ADL uncomment
define FEATURE_NAT44 uncomment
define FEATURE_CNAT comment
define FEATURE_DNS comment
define FEATURE_IP6 comment
define FEATURE_IKE_RESPONDER comment
define FEATURE_MACTIME uncomment
define FEATURE_OVPN uncomment
define FEATURE_MODEM_ROUTE uncomment
exec /home/pxcghost/VPP/pxc-gate/setup.tmpl
The setup.tmpl tries to create inside ports and, for some reason, fails on one port and stops processing.
show macro
set int mac address $(TRUNK) $(TRUNK_MACADDR)
set dhcp client intfc $(TRUNK) hostname $(HOSTNAME)
set int state $(TRUNK) up
bvi create instance 0
set int mac address bvi0 $(BVI_MACADDR)
set int l2 bridge bvi0 1 bvi
set int ip address bvi0 192.168.$(INSIDE_SUBNET).1/24
set int state bvi0 up
set int l2 bridge $(INSIDE_PORT1) 1
set int state $(INSIDE_PORT1) up
set int l2 bridge $(INSIDE_PORT2) 1
set int state $(INSIDE_PORT2) up
set int l2 bridge $(INSIDE_PORT3) 1
set int state $(INSIDE_PORT3) up
set int l2 bridge $(INSIDE_PORT4) 1
set int state $(INSIDE_PORT4) up
set int l2 bridge $(INSIDE_PORT5) 1
set int state $(INSIDE_PORT5) up
set int l2 bridge $(INSIDE_PORT6) 1
set int state $(INSIDE_PORT6) up
comment { dhcp server and host-stack access }
create tap host-if-name lstack host-ip4-addr 192.168.$(INSIDE_SUBNET).2/24 host-ip4-gw 192.168.$(INSIDE_SUBNET).1
set int l2 bridge tap0 1
set int state tap0 up
service restart isc-dhcp-server
$(FEATURE_ADL) { bin adl_interface_enable_disable $(TRUNK) }
$(FEATURE_ADL) { ip table 1 }
$(FEATURE_ADL) { ip route add table 1 0.0.0.0/0 via local }
$(FEATURE_NAT44) { nat44 forwarding enable }
$(FEATURE_NAT44) { nat44 plugin enable sessions 63000 }
$(FEATURE_NAT44) { nat44 add interface address $(TRUNK) }
$(FEATURE_NAT44) { set interface nat44 in bvi0 out $(TRUNK) }
comment { iPhones seem to need lots of RA messages... }
$(FEATURE_IP6) { ip6 nd bvi0 ra-managed-config-flag ra-other-config-flag ra-interval 30 20 ra-lifetime 180 }
comment { ip6 nd bvi0 prefix 0::0/0 ra-lifetime 100000 }
comment { if using the mactime plugin, configure it }
$(FEATURE_MACTIME) { bin mactime_add_del_range name roku mac 3c:ec:ef:da:89:58 allow-static }
$(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT1) }
$(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT2) }
$(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT3) }
$(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT4) }
$(FEATURE_MODEM_ROUTE) { ip route add 192.168.1.1/23 via $(TRUNK) }
for some reason, port4 fails as per the system, and I think it fails on the DHCP part of the script; any pointers are appreciated. I can bind ports and unbind back to kernel with no problem, and I can see the interfaces inside vpp and bvi look ok.
sudo vppctl show interface, ip addresses not assigned as I think that’s because the script doesn’t process the lstack and dhcp portion due to crashing.
Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
GigabitEthernet65/0/0 1 up 9000/0/0/0 rx packets 585
rx bytes 72405
tx packets 3
tx bytes 1002
drops 585
ip4 228
ip6 26
GigabitEthernet65/0/1 2 up 9000/0/0/0
GigabitEthernet65/0/2 3 up 9000/0/0/0
GigabitEthernet65/0/3 4 up 9000/0/0/0
TenGigabitEthernetb7/0/0 5 down 9000/0/0/0
TenGigabitEthernetb7/0/1 6 down 9000/0/0/0
TenGigabitEthernetb7/0/3 7 down 9000/0/0/0
bvi0 8 up 9000/0/0/0
local0 0 down 0/0/0/0
Network devices using DPDK-compatible driver
============================================
0000:65:00.0 'I350 Gigabit Network Connection 1521' drv=vfio-pci unused=igb,igb_uio,uio_pci_generic
0000:65:00.1 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic
0000:65:00.2 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic
0000:65:00.3 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic
0000:b7:00.0 'Ethernet Connection X722 for 10GBASE-T 37d2' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic
0000:b7:00.1 'Ethernet Connection X722 for 10GBASE-T 37d2' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic
0000:b7:00.3 'Ethernet Connection X722 for 10GbE SFP+ 37d0' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic
Network devices using kernel driver
===================================
0000:b7:00.2 'Ethernet Connection X722 for 10GbE SFP+ 37d0' if=eno7 drv=i40e unused=igb_uio,vfio-pci,uio_pci_generic *Active*
No 'Baseband' devices detected
==============================
Crypto devices using kernel driver
==================================
0000:b5:00.0 'C62x Chipset QuickAssist Technology 37c8' drv=c6xx unused=qat_c62x,igb_uio,vfio-pci,uio_pci_generic
0000:b6:00.0 'C62x Chipset QuickAssist Technology 37c8' drv=c6xx unused=qat_c62x,igb_uio,vfio-pci,uio_pci_generic
DMA devices using kernel driver
===============================
0000:00:04.0 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.1 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.2 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.3 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.4 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.5 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.6 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.7 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
No 'Eventdev' devices detected
==============================
No 'Mempool' devices detected
=============================
No 'Compress' devices detected
==============================
No 'Misc (rawdev)' devices detected
===================================
No 'Regex' devices detected
Bus info Device Class Description
=======================================================
pci@0000:65:00.0<mailto:pci@0000:65:00.0> network I350 Gigabit Network Connection
pci@0000:65:00.1<mailto:pci@0000:65:00.1> network I350 Gigabit Network Connection
pci@0000:65:00.2<mailto:pci@0000:65:00.2> network I350 Gigabit Network Connection
pci@0000:65:00.3<mailto:pci@0000:65:00.3> network I350 Gigabit Network Connection
pci@0000:b7:00.0<mailto:pci@0000:b7:00.0> network Ethernet Connection X722 for 10GBASE-T
pci@0000:b7:00.1<mailto:pci@0000:b7:00.1> network Ethernet Connection X722 for 10GBASE-T
pci@0000:b7:00.2<mailto:pci@0000:b7:00.2> eno7 network Ethernet Connection X722 for 10GbE SFP+
pci@0000:b7:00.3<mailto:pci@0000:b7:00.3> network Ethernet Connection X722 for 10GbE SFP+
eno7 is reserved to allow me remote access on kernel.
Any pointers greatly appreciated
[-- Attachment #2: Type: text/html, Size: 32092 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] maintainers: updated for Intel drivers
2024-01-17 10:17 [PATCH] maintainers: updated for Intel drivers qiming.yang
2024-01-18 5:21 ` Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example James Tervit
@ 2024-01-29 16:49 ` Thomas Monjalon
1 sibling, 0 replies; 4+ messages in thread
From: Thomas Monjalon @ 2024-01-29 16:49 UTC (permalink / raw)
To: Qiming Yang; +Cc: dev
17/01/2024 11:17, qiming.yang@intel.com:
> From: Qiming Yang <qiming.yang@intel.com>
>
> Remove the maintainer that no longer work.
>
> Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Sorry to see you leaving.
Applied
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-01-29 16:49 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-01-17 10:17 [PATCH] maintainers: updated for Intel drivers qiming.yang
2024-01-18 5:21 ` Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example James Tervit
2024-01-18 15:06 ` James Tervit
2024-01-29 16:49 ` [PATCH] maintainers: updated for Intel drivers Thomas Monjalon
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.