* [LARTC] IMQ Runtime error
@ 2004-01-25 23:33 tc
2004-01-26 0:50 ` Roy
2004-01-26 15:09 ` Andy Furniss
0 siblings, 2 replies; 3+ messages in thread
From: tc @ 2004-01-25 23:33 UTC (permalink / raw)
To: lartc
hi all, i have applied all patches and compiled the kernel (2.4.21), iptables
(1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run "modprobe imq
numdevs=1", the system returns - imq.o: init_module: Device or resource busy
the transcript is below -
[root@vmlinux project]# modprobe imq numdevs=1
/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device or resource
busy
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod
/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o failed
/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod imq failed
what could be wrong? thanks all,
bye
joseph
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [LARTC] IMQ Runtime error
2004-01-25 23:33 [LARTC] IMQ Runtime error tc
@ 2004-01-26 0:50 ` Roy
2004-01-26 15:09 ` Andy Furniss
1 sibling, 0 replies; 3+ messages in thread
From: Roy @ 2004-01-26 0:50 UTC (permalink / raw)
To: lartc
even if imq is quite useless right now
this eeror is caused probably by other loaded modules for userspace queue
nf_queue probably
since imq uses the same function
----- Original Message -----
From: "tc" <tc@me.net.ng>
To: <lartc@mailman.ds9a.nl>
Sent: Monday, January 26, 2004 1:33 AM
Subject: [LARTC] IMQ Runtime error
> hi all, i have applied all patches and compiled the kernel
> (2.4.21), iptables
> (1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run '"'modprobe
imq
> numdevs=1'"', the system returns - imq.o: init_module: Device or resource
busy
>
> the transcript is below -
>
> [root@vmlinux project]# modprobe imq numdevs=1
> /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device or
resource
> busy
> Hint: insmod errors can be caused by incorrect module parameters,
including
> invalid IO or IRQ parameters.
> You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod
> /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o failed
> /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod imq failed
>
> what could be wrong? thanks all,
> bye
> joseph
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] IMQ Runtime error
2004-01-25 23:33 [LARTC] IMQ Runtime error tc
2004-01-26 0:50 ` Roy
@ 2004-01-26 15:09 ` Andy Furniss
1 sibling, 0 replies; 3+ messages in thread
From: Andy Furniss @ 2004-01-26 15:09 UTC (permalink / raw)
To: lartc
Roy wrote:
> even if imq is quite useless right now
I thought it was OK for inbound traffic.
What sort of load/traffic do you see crashes with.
I have an old P200 as a gateway and can run bittorrents on it, with IMQ
doing outbound for locally generated traffic (not that I really need
to) and can do > a gig/day without ever crashing. I do close down at
night though, and only have 256/512 bandwidth. Is this way below what
you need to do to crash?
> this eeror is caused probably by other loaded modules for userspace queue
> nf_queue probably
> since imq uses the same function
Yea this is a pain, I would like to run a userspace for up and IMQ for down,
but can't use lib_ipq at the same time as IMQ.
It has been suggested that I can work round this, but I haven't tried yet.
Do you think it's possible?
Andy.
> ----- Original Message -----
> From: "tc" <tc@me.net.ng>
> To: <lartc@mailman.ds9a.nl>
> Sent: Monday, January 26, 2004 1:33 AM
> Subject: [LARTC] IMQ Runtime error
>
>
>
>>hi all, i have applied all patches and compiled the kernel
>>(2.4.21), iptables
>>(1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run '"'modprobe
>
> imq
>
>>numdevs=1'"', the system returns - imq.o: init_module: Device or resource
>
> busy
>
>>the transcript is below -
>>
>>[root@vmlinux project]# modprobe imq numdevs=1
>>/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device or
>
> resource
>
>>busy
>>Hint: insmod errors can be caused by incorrect module parameters,
>
> including
>
>>invalid IO or IRQ parameters.
>> You may find more information in syslog or the output from dmesg
>>/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod
>>/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o failed
>>/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod imq failed
>>
>>what could be wrong? thanks all,
>>bye
>>joseph
>>_______________________________________________
>>LARTC mailing list / LARTC@mailman.ds9a.nl
>>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>>
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-01-26 15:09 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-01-25 23:33 [LARTC] IMQ Runtime error tc
2004-01-26 0:50 ` Roy
2004-01-26 15:09 ` Andy Furniss
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.