From: Joachim Feise <jfeise@ics.uci.edu>
To: linux-scsi@vger.kernel.org
Subject: PROBLEM: 2.6.3 hangs when writing to scsi-dvd
Date: Thu, 19 Feb 2004 11:47:04 -0800 [thread overview]
Message-ID: <403512B8.2060403@ics.uci.edu> (raw)
[1.] One line summary of the problem:
2.6.3 hangs when writing to scsi-dvd
[2.] Full description of the problem/report:
I have a DVD drive (BTC1004) connected via an IDE-SCSI bridge to
an Adaptec 29160 host adapter.
With kernel 2.6.3, I experience a complete system hang whenever I try
to record data on a DVD.
It requires a reboot.
[3.] Keywords (i.e., modules, networking, kernel):
SCSI
[4.] Kernel version (from /proc/version):
Linux version 2.6.3 (root@pv105234) (gcc version 3.2.2) #1 Wed Feb 18 04:26:46 PST 2004
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
None.
[6.] A small shell script or example program which triggers the
problem (if possible)
growisofs -Z /dev/sr1 -R -J tmpdir/files
Where /dev/sr1 is the DVD device
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux pv105234 2.6.3 #1 Wed Feb 18 04:26:46 PST 2004 i686 unknown
Gnu C 3.2.2
Gnu make 3.80
util-linux 2.11z
mount 2.11z
module-init-tools 0.9.13
e2fsprogs 1.32
jfsutils 1.1.1
reiserfsprogs 3.6.4
xfsprogs 2.3.5
pcmcia-cs 3.2.4
quota-tools 3.08.
PPP 2.4.2
nfs-utils 1.0.1
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Linux C++ Library 5.0.2
Procps 3.1.6
Net-tools 1.60
Kbd 1.08
Sh-utils 2.0
Modules Loaded snd_seq_midi snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss
softdog ipv6 ohci_hcd ehci_hcd snd_cs46xx snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm
snd_timer snd soundcore gameport snd_page_alloc i2c_core ide_scsi ppp_mppe ppp_deflate ppp_generic
slhc usb_storage
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 0
cpu MHz : 334.143
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 659.45
[7.3.] Module information (from /proc/modules):
snd_seq_midi 8384 0 - Live 0xd3d83000
snd_seq_oss 35104 0 - Live 0xd3dea000
snd_seq_midi_event 7744 2 snd_seq_midi,snd_seq_oss, Live 0xd3cec000
snd_seq 56592 5 snd_seq_midi,snd_seq_oss,snd_seq_midi_event, Live 0xd3dbe000
snd_pcm_oss 54564 1 - Live 0xd3dcf000
snd_mixer_oss 20096 2 snd_pcm_oss, Live 0xd3d7d000
softdog 4808 1 - Live 0xd3d35000
ipv6 258272 14 - Live 0xd3e08000
ohci_hcd 19328 0 - Live 0xd3d3c000
ehci_hcd 25888 0 - Live 0xd3d6e000
snd_cs46xx 90956 2 - Live 0xd3d88000
snd_rawmidi 25216 2 snd_seq_midi,snd_cs46xx, Live 0xd3d25000
snd_seq_device 8068 4 snd_seq_midi,snd_seq_oss,snd_seq,snd_rawmidi, Live 0xd3ce6000
snd_ac97_codec 63588 1 snd_cs46xx, Live 0xd3d5d000
snd_pcm 101856 2 snd_pcm_oss,snd_cs46xx, Live 0xd3d43000
snd_timer 26272 2 snd_seq,snd_pcm, Live 0xd3d0d000
snd 55492 12
snd_seq_midi,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_cs46xx,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,
Live 0xd3d16000
soundcore 10176 3 snd, Live 0xd3d00000
gameport 4736 1 snd_cs46xx, Live 0xd3ce9000
snd_page_alloc 12228 2 snd_cs46xx,snd_pcm, Live 0xd3cf7000
i2c_core 23488 0 - Live 0xd3cdf000
ide_scsi 15268 0 - Live 0xd3cda000
ppp_mppe 14304 0 - Live 0xd3cd5000
ppp_deflate 6144 0 - Live 0xd3cc1000
ppp_generic 31528 2 ppp_mppe,ppp_deflate, Live 0xd3ccc000
slhc 7296 1 ppp_generic, Live 0xd3cbe000
usb_storage 68064 0 - Live 0xd3b56000
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
cat /proc/ioports
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000cb000-000d3fff : Extension ROM
000f0000-000fffff : System ROM
00100000-11ffffff : System RAM
00100000-003c88f2 : Kernel code
003c88f3-004db8ff : Kernel data
c056f000-c096f000 : Bigphysarea
c7900000-cf9fffff : PCI Bus #01
c8000000-cbffffff : 0000:01:00.0
c8000000-c8ffffff : vesafb
d0000000-d3ffffff : 0000:00:00.0
d7b00000-efcfffff : PCI Bus #01
e0000000-e3ffffff : 0000:01:00.0
e4000000-e7ffffff : 0000:01:00.0
e8000000-ebffffff : 0000:01:00.0
efc80000-efcfffff : 0000:01:00.0
efe00000-efefffff : 0000:00:09.0
efe00000-efe02fff : CS46xx_BA1_data0
efe10000-efe137ff : CS46xx_BA1_data1
efe20000-efe26fff : CS46xx_BA1_pmem
efe30000-efe300ff : CS46xx_BA1_reg
efffc000-efffcfff : 0000:00:09.0
efffc000-efffcfff : CS46xx_BA0
efffee00-efffeeff : 0000:00:0d.0
efffee00-efffeeff : 8139too
efffef00-efffefff : 0000:00:0f.0
efffef00-efffefff : 8139too
effff000-efffffff : 0000:00:11.0
effff000-efffffff : aic7xxx
ffff0000-ffffffff : reserved
cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000cb000-000d3fff : Extension ROM
000f0000-000fffff : System ROM
00100000-11ffffff : System RAM
00100000-003c88f2 : Kernel code
003c88f3-004db8ff : Kernel data
c056f000-c096f000 : Bigphysarea
c7900000-cf9fffff : PCI Bus #01
c8000000-cbffffff : 0000:01:00.0
c8000000-c8ffffff : vesafb
d0000000-d3ffffff : 0000:00:00.0
d7b00000-efcfffff : PCI Bus #01
e0000000-e3ffffff : 0000:01:00.0
e4000000-e7ffffff : 0000:01:00.0
e8000000-ebffffff : 0000:01:00.0
efc80000-efcfffff : 0000:01:00.0
efe00000-efefffff : 0000:00:09.0
efe00000-efe02fff : CS46xx_BA1_data0
efe10000-efe137ff : CS46xx_BA1_data1
efe20000-efe26fff : CS46xx_BA1_pmem
efe30000-efe300ff : CS46xx_BA1_reg
efffc000-efffcfff : 0000:00:09.0
efffc000-efffcfff : CS46xx_BA0
efffee00-efffeeff : 0000:00:0d.0
efffee00-efffeeff : 8139too
efffef00-efffefff : 0000:00:0f.0
efffef00-efffefff : 8139too
effff000-efffffff : 0000:00:11.0
effff000-efffffff : aic7xxx
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 64
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: d7b00000-efcfffff
Prefetchable memory behind bridge: c7900000-cf9fffff
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 4: I/O ports at ffa0 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at d800 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:09.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio
Accelerator] (rev 01)
Subsystem: Voyetra Technologies: Unknown device 3357
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at efffc000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at efe00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: D-Link System Inc DFE-538TX
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at da00 [size=256]
Region 1: Memory at efffee00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
Subsystem: D-Link System Inc DFE-530TX+ 10/100 Ethernet Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at efffef00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
Subsystem: Adaptec 29160 Ultra160 SCSI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (10000ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
BIST result: 00
Region 0: I/O ports at de00 [disabled] [size=256]
Region 1: Memory at effff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at effc0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:13.0 Class 6120: Unknown device 0002:0400 (rev de) (prog-if 11)
Subsystem: Unknown device 0008:0000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 0
Region 2: Memory at <unassigned> (32-bit, prefetchable) [disabled]
Region 3: Memory at <unassigned> (32-bit, prefetchable) [disabled]
01:00.0 VGA compatible controller: S3 Inc. 86C410 Savage 2000 (rev 02) (prog-if 00 [VGA])
Subsystem: S3 Inc. 86C410 Savage 2000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (3000ns min, 4000ns max), cache line size 08
Interrupt: pin A routed to IRQ 0
Region 0: Memory at efc80000 (32-bit, non-prefetchable) [size=512K]
Region 1: Memory at c8000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Region 3: Memory at e4000000 (32-bit, non-prefetchable) [size=64M]
Region 4: Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at efc70000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: QUANTUM Model: ATLAS10K3_36_WLS Rev: 020W
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: YAMAHA Model: CRW-F1S Rev: 1.0c
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: DVDRW Model: IDE1004 Rev: 0048
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 01
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 02
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 03
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 04
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: Model: USB DISK Rev: 1.17
Type: Direct-Access ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:
It worked fine with 2.6.2.
next reply other threads:[~2004-02-19 19:48 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-19 19:47 Joachim Feise [this message]
2004-02-20 22:13 ` PROBLEM: 2.6.3 hangs when writing to scsi-dvd Joachim Feise
2004-02-23 11:52 ` Kai Makisara
2004-02-23 13:26 ` Jens Axboe
2004-02-23 14:22 ` Kai Makisara
2004-02-23 14:25 ` Jens Axboe
2004-02-23 18:21 ` Frank Pieczynski
2004-02-23 19:05 ` Jens Axboe
2004-02-24 7:18 ` Joachim Feise
2004-02-23 13:46 ` mike
-- strict thread matches above, loose matches on Subject: below --
2004-02-21 10:25 Michael Guntsche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=403512B8.2060403@ics.uci.edu \
--to=jfeise@ics.uci.edu \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.