* [Ocfs2-devel] 2.6.x make support
@ 2004-03-03 15:42 John L. Villalovos
0 siblings, 0 replies; 2+ messages in thread
From: John L. Villalovos @ 2004-03-03 15:42 UTC (permalink / raw)
To: ocfs2-devel
Updated to get the make system to be able to build for 2.6.x kernels.
More work still needs to be done but it will compile.
I had to create a Config-minimal.make.in file because when I included Config.make during the portion of the build when the kernel is calling back into our Makefile it broke :( We seem to be setting some variables which are being used by the kernel build system.
So instead I created this minimal one.
This is just a first start at this. There is more work to be done in this area but it does make it so that people should be able to build a kernel for 2.6.x.
John
Index: configure.in
===================================================================
--- configure.in (revision 747)
+++ configure.in (working copy)
@@ -83,6 +83,13 @@
AC_MSG_ERROR(GCC is required)
fi
+AC_ARG_ENABLE(kernel-2_6, AC_HELP_STRING([--enable-kernel-2_6], [(BROKEN!) Enable building on Linux kernel version 2.6.x (default=no)]),enable_kernel26=yes,enable_kernel26=no)
+OCFS_KERNEL_2_6=
+if test "x$enable_kernel26" = "xyes"; then
+ OCFS_KERNEL_2_6=yes
+fi
+AC_SUBST(OCFS_KERNEL_2_6)
+
AC_ARG_ENABLE(debug, [ --enable-debug=[yes/no] Turn on debugging [default=yes]],,enable_debug=yes)
OCFS_DEBUG=
if test "x$enable_debug" = "xyes"; then
@@ -178,6 +185,13 @@
case "$kversion" in
2.4.*)
;;
+ 2.6.*)
+ if test "x$enable_kernel26" = "xyes"; then
+ AC_MSG_NOTICE([Support for kernel version 2.6 is BROKEN at this time! Your system WILL hang.])
+ else
+ AC_MSG_ERROR([Support for kernel version 2.6 is BROKEN (Your system WILL hang!) at this time. You must use --enable-kernel-2_6 to get past this point.])
+ fi
+ ;;
*)
AC_MSG_ERROR([This module only supports kernel version 2.4.x])
;;
@@ -304,6 +318,9 @@
GCCINC=$gccdir
AC_SUBST(GCCINC)
+OCFS_BUILD_DIR=`pwd`
+AC_SUBST(OCFS_BUILD_DIR)
+
AC_OUTPUT([Config.make
vendor/redhat/ocfs2-2.4.9-e.spec
vendor/redhat/ocfs2-2.4.18-e.spec
@@ -314,4 +331,5 @@
vendor/unitedlinux/ocfs2-2.4.21-107.spec
vendor/unitedlinux/ocfs2-2.4.21-111.spec
vendor/unitedlinux/ocfs2-2.4.21-138.spec
+src/Makefile-2.6
])
Index: Config.make.in
===================================================================
--- Config.make.in (revision 747)
+++ Config.make.in (working copy)
@@ -58,5 +58,6 @@
OCFS_MEMDEBUG = @OCFS_MEMDEBUG@
OCFS_TRACE = @OCFS_TRACE@
OCFS_PROCESSOR = @OCFS_PROCESSOR@
+OCFS_KERNEL_2_6 = @OCFS_KERNEL_2_6@
USE_JOURNAL_CREATE_REPLACEMENT = @USE_JOURNAL_CREATE_REPLACEMENT@
Index: src/Makefile
===================================================================
--- src/Makefile (revision 747)
+++ src/Makefile (working copy)
@@ -1,3 +1,11 @@
+# See if we are being included by the 2.6 kernel build system.
+ifneq ($(KERNELRELEASE),)
+# We are being included by the 2.6 kernel build system. So we will include the
+# 2.6.x Makefile and skip everything else.
+include $(obj)/Makefile-2.6
+else
+# Normal build that is being called locally
+
TOPDIR = ..
include $(TOPDIR)/Preamble.make
@@ -2,2 +10,7 @@
+# Preliminary 2.6.x kernel support. See if we are building for the 2.6.x
+# kernel
+ifndef OCFS_KERNEL_2_6
+# Building for a 2.4.x kernel
+
WARNINGS = -Wall -Wstrict-prototypes -Wno-format
@@ -196,4 +209,11 @@
dist-subdircreate:
$(TOPDIR)/mkinstalldirs $(DIST_DIR)/inc
+
+else # OCFS_KERNEL_2_6
+# Building for a 2.6.x kernel
+include Makefile-2.6
+endif # OCFS_KERNEL_2_6
+
include $(TOPDIR)/Postamble.make
+endif # ifneq ($(KERNELRELEASE),)
--- /dev/null 2004-02-23 13:02:56.000000000 -0800
+++ src/Makefile-2.6.in 2004-03-02 14:17:21.207201128 -0800
@@ -0,0 +1,74 @@
+# The 2.6.x kernel makefile
+
+# Global parameter so we know where our stuff is
+OCFS_SRC_DIR := @OCFS_BUILD_DIR@/src
+
+# This Makefile has two ways through it. They are:
+# 1. We are being included by the local Makefile to do a 2.6 kernel build.
+# In this method we will call the kernel make system to build our module.
+# This will cause the kernel make system to call back into our makefile
+# (2nd way).
+#
+# 2. We are being included by the kernel make system. So in this method we
+# just setup the variables that the make system wants and then the kernel
+# make system will take care of the build.
+
+ifeq ($(KERNELRELEASE),)
+# 1st method. Local Makefile is including us. We will now call the kernel
+# make system to do the build.
+
+KDIR := $(KERNELDIR)
+
+all:
+ $(MAKE) -C $(KDIR) V=1 SUBDIRS=$(OCFS_SRC_DIR) modules
+
+else
+# 2nd method. The kernel make system is including us. We need to setup the
+# various parameters for the kernel make system and then it will take care of
+# building us.
+
+EXTRA_CFLAGS += -D__ILP32__ -I$(OCFS_SRC_DIR)/inc \
+ -DALLOW_NO_HANDLE_SYNCING -DOCFS_PARANOID_ABORTS \
+ -Wno-format
+
+# FIXME: Need to figure out how to use the stuff from Postamble.make. In
+# particular the MD5 and Version strings
+EXTRA_CFLAGS += -DOCFS_BUILD_DATE=\"y\" -DOCFS_BUILD_MD5=\"z\" \
+ -DOCFS_BUILD_VERSION=\"x\"
+
+# FIXME: Probably should not be doing this
+EXTRA_CFLAGS += -Werror
+
+# Defines
+HAVE_NPTL = @HAVE_NPTL@
+OCFS_DEBUG = @OCFS_DEBUG@
+OCFS_LARGEIO = @OCFS_LARGEIO@
+OCFS_AIO = @OCFS_AIO@
+OCFS_MEMDEBUG = @OCFS_MEMDEBUG@
+OCFS_TRACE = @OCFS_TRACE@
+OCFS_PROCESSOR = @OCFS_PROCESSOR@
+OCFS_KERNEL_2_6 = @OCFS_KERNEL_2_6@
+
+# Setup all the extra parameters that might be needed by the build.
+# FIXME: Not sure if we have all the parameters here.
+ifdef OCFS_DEBUG
+EXTRA_CFLAGS += -DDEBUG
+endif
+
+ifdef OCFS_TRACE
+EXTRA_CFLAGS += -DTRACE
+endif
+
+ifdef HAVE_NPTL
+EXTRA_CFLAGS += -DHAVE_NPTL
+endif
+
+# Kernel Module file to produce
+obj-m += ocfs2.o
+
+# list of object files that are used to create our module
+ocfs2-objs := alloc.o divdi3.o hash.o ioctl.o oin.o super.o ver.o \
+ bitmap.o dlm.o heartbeat.o journal.o osb.o symlink.o volcfg.o \
+ dcache.o extmap.o inode.o namei.o proc.o sysfile.o vote.o \
+ dir.o file.o io.o nm.o sem.o util.o
+endif
-------------- next part --------------
Index: configure.in
===================================================================
--- configure.in (revision 747)
+++ configure.in (working copy)
@@ -83,6 +83,13 @@
AC_MSG_ERROR(GCC is required)
fi
+AC_ARG_ENABLE(kernel-2_6, AC_HELP_STRING([--enable-kernel-2_6], [(BROKEN!) Enable building on Linux kernel version 2.6.x (default=no)]),enable_kernel26=yes,enable_kernel26=no)
+OCFS_KERNEL_2_6=
+if test "x$enable_kernel26" = "xyes"; then
+ OCFS_KERNEL_2_6=yes
+fi
+AC_SUBST(OCFS_KERNEL_2_6)
+
AC_ARG_ENABLE(debug, [ --enable-debug=[yes/no] Turn on debugging [default=yes]],,enable_debug=yes)
OCFS_DEBUG=
if test "x$enable_debug" = "xyes"; then
@@ -178,6 +185,13 @@
case "$kversion" in
2.4.*)
;;
+ 2.6.*)
+ if test "x$enable_kernel26" = "xyes"; then
+ AC_MSG_NOTICE([Support for kernel version 2.6 is BROKEN at this time! Your system WILL hang.])
+ else
+ AC_MSG_ERROR([Support for kernel version 2.6 is BROKEN (Your system WILL hang!) at this time. You must use --enable-kernel-2_6 to get past this point.])
+ fi
+ ;;
*)
AC_MSG_ERROR([This module only supports kernel version 2.4.x])
;;
@@ -304,6 +318,9 @@
GCCINC=$gccdir
AC_SUBST(GCCINC)
+OCFS_BUILD_DIR=`pwd`
+AC_SUBST(OCFS_BUILD_DIR)
+
AC_OUTPUT([Config.make
vendor/redhat/ocfs2-2.4.9-e.spec
vendor/redhat/ocfs2-2.4.18-e.spec
@@ -314,4 +331,5 @@
vendor/unitedlinux/ocfs2-2.4.21-107.spec
vendor/unitedlinux/ocfs2-2.4.21-111.spec
vendor/unitedlinux/ocfs2-2.4.21-138.spec
+src/Makefile-2.6
])
Index: Config.make.in
===================================================================
--- Config.make.in (revision 747)
+++ Config.make.in (working copy)
@@ -58,5 +58,6 @@
OCFS_MEMDEBUG = @OCFS_MEMDEBUG@
OCFS_TRACE = @OCFS_TRACE@
OCFS_PROCESSOR = @OCFS_PROCESSOR@
+OCFS_KERNEL_2_6 = @OCFS_KERNEL_2_6@
USE_JOURNAL_CREATE_REPLACEMENT = @USE_JOURNAL_CREATE_REPLACEMENT@
Index: src/Makefile
===================================================================
--- src/Makefile (revision 747)
+++ src/Makefile (working copy)
@@ -1,3 +1,11 @@
+# See if we are being included by the 2.6 kernel build system.
+ifneq ($(KERNELRELEASE),)
+# We are being included by the 2.6 kernel build system. So we will include the
+# 2.6.x Makefile and skip everything else.
+include $(obj)/Makefile-2.6
+else
+# Normal build that is being called locally
+
TOPDIR = ..
include $(TOPDIR)/Preamble.make
@@ -2,2 +10,7 @@
+# Preliminary 2.6.x kernel support. See if we are building for the 2.6.x
+# kernel
+ifndef OCFS_KERNEL_2_6
+# Building for a 2.4.x kernel
+
WARNINGS = -Wall -Wstrict-prototypes -Wno-format
@@ -196,4 +209,11 @@
dist-subdircreate:
$(TOPDIR)/mkinstalldirs $(DIST_DIR)/inc
+
+else # OCFS_KERNEL_2_6
+# Building for a 2.6.x kernel
+include Makefile-2.6
+endif # OCFS_KERNEL_2_6
+
include $(TOPDIR)/Postamble.make
+endif # ifneq ($(KERNELRELEASE),)
--- /dev/null 2004-02-23 13:02:56.000000000 -0800
+++ src/Makefile-2.6.in 2004-03-02 14:17:21.207201128 -0800
@@ -0,0 +1,74 @@
+# The 2.6.x kernel makefile
+
+# Global parameter so we know where our stuff is
+OCFS_SRC_DIR := @OCFS_BUILD_DIR@/src
+
+# This Makefile has two ways through it. They are:
+# 1. We are being included by the local Makefile to do a 2.6 kernel build.
+# In this method we will call the kernel make system to build our module.
+# This will cause the kernel make system to call back into our makefile
+# (2nd way).
+#
+# 2. We are being included by the kernel make system. So in this method we
+# just setup the variables that the make system wants and then the kernel
+# make system will take care of the build.
+
+ifeq ($(KERNELRELEASE),)
+# 1st method. Local Makefile is including us. We will now call the kernel
+# make system to do the build.
+
+KDIR := $(KERNELDIR)
+
+all:
+ $(MAKE) -C $(KDIR) V=1 SUBDIRS=$(OCFS_SRC_DIR) modules
+
+else
+# 2nd method. The kernel make system is including us. We need to setup the
+# various parameters for the kernel make system and then it will take care of
+# building us.
+
+EXTRA_CFLAGS += -D__ILP32__ -I$(OCFS_SRC_DIR)/inc \
+ -DALLOW_NO_HANDLE_SYNCING -DOCFS_PARANOID_ABORTS \
+ -Wno-format
+
+# FIXME: Need to figure out how to use the stuff from Postamble.make. In
+# particular the MD5 and Version strings
+EXTRA_CFLAGS += -DOCFS_BUILD_DATE=\"y\" -DOCFS_BUILD_MD5=\"z\" \
+ -DOCFS_BUILD_VERSION=\"x\"
+
+# FIXME: Probably should not be doing this
+EXTRA_CFLAGS += -Werror
+
+# Defines
+HAVE_NPTL = @HAVE_NPTL@
+OCFS_DEBUG = @OCFS_DEBUG@
+OCFS_LARGEIO = @OCFS_LARGEIO@
+OCFS_AIO = @OCFS_AIO@
+OCFS_MEMDEBUG = @OCFS_MEMDEBUG@
+OCFS_TRACE = @OCFS_TRACE@
+OCFS_PROCESSOR = @OCFS_PROCESSOR@
+OCFS_KERNEL_2_6 = @OCFS_KERNEL_2_6@
+
+# Setup all the extra parameters that might be needed by the build.
+# FIXME: Not sure if we have all the parameters here.
+ifdef OCFS_DEBUG
+EXTRA_CFLAGS += -DDEBUG
+endif
+
+ifdef OCFS_TRACE
+EXTRA_CFLAGS += -DTRACE
+endif
+
+ifdef HAVE_NPTL
+EXTRA_CFLAGS += -DHAVE_NPTL
+endif
+
+# Kernel Module file to produce
+obj-m += ocfs2.o
+
+# list of object files that are used to create our module
+ocfs2-objs := alloc.o divdi3.o hash.o ioctl.o oin.o super.o ver.o \
+ bitmap.o dlm.o heartbeat.o journal.o osb.o symlink.o volcfg.o \
+ dcache.o extmap.o inode.o namei.o proc.o sysfile.o vote.o \
+ dir.o file.o io.o nm.o sem.o util.o
+endif
^ permalink raw reply [flat|nested] 2+ messages in thread
* [Ocfs2-devel] 2.6.x make support
@ 2004-03-03 15:43 Villalovos, John L
0 siblings, 0 replies; 2+ messages in thread
From: Villalovos, John L @ 2004-03-03 15:43 UTC (permalink / raw)
To: ocfs2-devel
I seem to have included the wrong diff.
Let me fix and resend.
Aaacckkk!! :(
John
> -----Original Message-----
> From: ocfs2-devel-bounces@oss.oracle.com
> [mailto:ocfs2-devel-bounces@oss.oracle.com] On Behalf Of
> Villalovos, John L
> Sent: Wednesday, March 03, 2004 1:42 PM
> To: ocfs2-devel@oss.oracle.com
> Subject: [Ocfs2-devel] 2.6.x make support
>
>
> Updated to get the make system to be able to build for 2.6.x kernels.
>
> More work still needs to be done but it will compile.
>
> I had to create a Config-minimal.make.in file because when I
> included Config.make during the portion of the build when the
> kernel is calling back into our Makefile it broke :( We seem
> to be setting some variables which are being used by the
> kernel build system.
>
> So instead I created this minimal one.
>
> This is just a first start at this. There is more work to be
> done in this area but it does make it so that people should
> be able to build a kernel for 2.6.x.
>
> John
>
>
> Index: configure.in
> ===================================================================
> --- configure.in (revision 747)
> +++ configure.in (working copy)
> @@ -83,6 +83,13 @@
> AC_MSG_ERROR(GCC is required)
> fi
>
> +AC_ARG_ENABLE(kernel-2_6,
> AC_HELP_STRING([--enable-kernel-2_6], [(BROKEN!) Enable
> building on Linux kernel version 2.6.x
> (default=no)]),enable_kernel26=yes,enable_kernel26=no)
> +OCFS_KERNEL_2_6=
> +if test "x$enable_kernel26" = "xyes"; then
> + OCFS_KERNEL_2_6=yes
> +fi
> +AC_SUBST(OCFS_KERNEL_2_6)
> +
> AC_ARG_ENABLE(debug, [ --enable-debug=[yes/no]
> Turn on debugging [default=yes]],,enable_debug=yes)
> OCFS_DEBUG=
> if test "x$enable_debug" = "xyes"; then
> @@ -178,6 +185,13 @@
> case "$kversion" in
> 2.4.*)
> ;;
> + 2.6.*)
> + if test "x$enable_kernel26" = "xyes"; then
> + AC_MSG_NOTICE([Support for kernel version 2.6 is
> BROKEN at this time! Your system WILL hang.])
> + else
> + AC_MSG_ERROR([Support for kernel version 2.6 is BROKEN
> (Your system WILL hang!) at this time. You must use
> --enable-kernel-2_6 to get past this point.])
> + fi
> + ;;
> *)
> AC_MSG_ERROR([This module only supports kernel version 2.4.x])
> ;;
> @@ -304,6 +318,9 @@
> GCCINC=$gccdir
> AC_SUBST(GCCINC)
>
> +OCFS_BUILD_DIR=`pwd`
> +AC_SUBST(OCFS_BUILD_DIR)
> +
> AC_OUTPUT([Config.make
> vendor/redhat/ocfs2-2.4.9-e.spec
> vendor/redhat/ocfs2-2.4.18-e.spec
> @@ -314,4 +331,5 @@
> vendor/unitedlinux/ocfs2-2.4.21-107.spec
> vendor/unitedlinux/ocfs2-2.4.21-111.spec
> vendor/unitedlinux/ocfs2-2.4.21-138.spec
> +src/Makefile-2.6
> ])
> Index: Config.make.in
> ===================================================================
> --- Config.make.in (revision 747)
> +++ Config.make.in (working copy)
> @@ -58,5 +58,6 @@
> OCFS_MEMDEBUG = @OCFS_MEMDEBUG@
> OCFS_TRACE = @OCFS_TRACE@
> OCFS_PROCESSOR = @OCFS_PROCESSOR@
> +OCFS_KERNEL_2_6 = @OCFS_KERNEL_2_6@
>
> USE_JOURNAL_CREATE_REPLACEMENT = @USE_JOURNAL_CREATE_REPLACEMENT@
> Index: src/Makefile
> ===================================================================
> --- src/Makefile (revision 747)
> +++ src/Makefile (working copy)
> @@ -1,3 +1,11 @@
> +# See if we are being included by the 2.6 kernel build system.
> +ifneq ($(KERNELRELEASE),)
> +# We are being included by the 2.6 kernel build system. So
> we will include the
> +# 2.6.x Makefile and skip everything else.
> +include $(obj)/Makefile-2.6
> +else
> +# Normal build that is being called locally
> +
> TOPDIR = ..
>
> include $(TOPDIR)/Preamble.make
> @@ -2,2 +10,7 @@
>
> +# Preliminary 2.6.x kernel support. See if we are building
> for the 2.6.x
> +# kernel
> +ifndef OCFS_KERNEL_2_6
> +# Building for a 2.4.x kernel
> +
> WARNINGS = -Wall -Wstrict-prototypes -Wno-format
> @@ -196,4 +209,11 @@
> dist-subdircreate:
> $(TOPDIR)/mkinstalldirs $(DIST_DIR)/inc
>
> +
> +else # OCFS_KERNEL_2_6
> +# Building for a 2.6.x kernel
> +include Makefile-2.6
> +endif # OCFS_KERNEL_2_6
> +
> include $(TOPDIR)/Postamble.make
> +endif # ifneq ($(KERNELRELEASE),)
> --- /dev/null 2004-02-23 13:02:56.000000000 -0800
> +++ src/Makefile-2.6.in 2004-03-02 14:17:21.207201128 -0800
> @@ -0,0 +1,74 @@
> +# The 2.6.x kernel makefile
> +
> +# Global parameter so we know where our stuff is
> +OCFS_SRC_DIR := @OCFS_BUILD_DIR@/src
> +
> +# This Makefile has two ways through it. They are:
> +# 1. We are being included by the local Makefile to
> do a 2.6 kernel build.
> +# In this method we will call the kernel make system to
> build our module.
> +# This will cause the kernel make system to call back
> into our makefile
> +# (2nd way).
> +#
> +# 2. We are being included by the kernel make
> system. So in this method we
> +# just setup the variables that the make system wants and
> then the kernel
> +# make system will take care of the build.
> +
> +ifeq ($(KERNELRELEASE),)
> +# 1st method. Local Makefile is including us. We will now
> call the kernel
> +# make system to do the build.
> +
> +KDIR := $(KERNELDIR)
> +
> +all:
> + $(MAKE) -C $(KDIR) V=1 SUBDIRS=$(OCFS_SRC_DIR) modules
> +
> +else
> +# 2nd method. The kernel make system is including us. We
> need to setup the
> +# various parameters for the kernel make system and then it
> will take care of
> +# building us.
> +
> +EXTRA_CFLAGS += -D__ILP32__ -I$(OCFS_SRC_DIR)/inc \
> + -DALLOW_NO_HANDLE_SYNCING -DOCFS_PARANOID_ABORTS \
> + -Wno-format
> +
> +# FIXME: Need to figure out how to use the stuff from
> Postamble.make. In
> +# particular the MD5 and Version strings
> +EXTRA_CFLAGS += -DOCFS_BUILD_DATE=\"y\" -DOCFS_BUILD_MD5=\"z\" \
> + -DOCFS_BUILD_VERSION=\"x\"
> +
> +# FIXME: Probably should not be doing this
> +EXTRA_CFLAGS += -Werror
> +
> +# Defines
> +HAVE_NPTL = @HAVE_NPTL@
> +OCFS_DEBUG = @OCFS_DEBUG@
> +OCFS_LARGEIO = @OCFS_LARGEIO@
> +OCFS_AIO = @OCFS_AIO@
> +OCFS_MEMDEBUG = @OCFS_MEMDEBUG@
> +OCFS_TRACE = @OCFS_TRACE@
> +OCFS_PROCESSOR = @OCFS_PROCESSOR@
> +OCFS_KERNEL_2_6 = @OCFS_KERNEL_2_6@
> +
> +# Setup all the extra parameters that might be needed by the build.
> +# FIXME: Not sure if we have all the parameters here.
> +ifdef OCFS_DEBUG
> +EXTRA_CFLAGS += -DDEBUG
> +endif
> +
> +ifdef OCFS_TRACE
> +EXTRA_CFLAGS += -DTRACE
> +endif
> +
> +ifdef HAVE_NPTL
> +EXTRA_CFLAGS += -DHAVE_NPTL
> +endif
> +
> +# Kernel Module file to produce
> +obj-m += ocfs2.o
> +
> +# list of object files that are used to create our module
> +ocfs2-objs := alloc.o divdi3.o hash.o ioctl.o oin.o super.o ver.o \
> + bitmap.o dlm.o heartbeat.o journal.o osb.o
> symlink.o volcfg.o \
> + dcache.o extmap.o inode.o namei.o proc.o
> sysfile.o vote.o \
> + dir.o file.o io.o nm.o sem.o util.o
> +endif
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-03-03 15:43 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-03 15:42 [Ocfs2-devel] 2.6.x make support John L. Villalovos
-- strict thread matches above, loose matches on Subject: below --
2004-03-03 15:43 Villalovos, John L
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.