All of lore.kernel.org
 help / color / mirror / Atom feed
* [Bluez-users] Toshiba Portege M200 internal bluetooth adapter
@ 2004-03-09 12:26 damou
  2004-03-09 15:16 ` Brad Midgley
  0 siblings, 1 reply; 8+ messages in thread
From: damou @ 2004-03-09 12:26 UTC (permalink / raw)
  To: bluez-users

>Hi
Hi,
>
>It's a relief to know it works for someone at least.
>
>I think part of the trouble is I'm using libc 2.3. It's clear that the
>macro "TOSH_SMM" that won't compile invokes another macro (_IOWR) with
>the wrong
>arguments, at least for 2.3. In the unmodified sources, the third
>argument is the number '24' but the third argument is supposed to be a
>type that can be applied to sizeof() to *produce* the size (ends up
>being 24).
>
>Even so, It doesn't work for me under 2.4.25-mh1 or 2.6.4rc1-mm2. They
>both complain "Can't access Toshiba device /dev/toshiba" and strace 
>shows that the error happens with the first ioctl.
>
>/dev/toshiba is there, the "toshiba" module is loaded. I installed
>toshutils from debian using apt... I'm not sure what else to try.
>

I also installed toshutils using apt-get on my Knoppix Remaster CD.

>
>ACPI is the only way I could get suspend to work. (but only in 2.6.4). 
>The APM module won't load under either kernel, but I thought that was 
>because the m200 had no APM bios.
>

Here 
http://www.sfires.net/toshiba/
you can find how to enable Bluetooth with an ACPI enabled Kernel

>
>What does lsmod show on your knoppix machine?

Here it is:
===========
Module                  Size  Used by    Not tainted
smbfs                  33008   1  (autoclean)
toshiba                 2752   0  (autoclean)
l2cap                  16876   1  (autoclean)
hci_usb                 7612   1  (autoclean)
bluez                  30308   3  (autoclean) [l2cap hci_usb]
autofs4                 8724   1  (autoclean)
nls_cp437               4380   0  (autoclean)
nls_iso8859-1           2876   0  (autoclean)
ntfs                   50784   0  (autoclean)
i810_audio             23112   0 
ac97_codec              9992   0  [i810_audio]
soundcore               3364   2  [i810_audio]
serial                 51876   0  (autoclean)
usb-uhci               21836   0  (unused)
usbcore                57088   1  [hci_usb usb-uhci]
ds                      6472   1 
yenta_socket            8640   1 
pcmcia_core            37568   0  [ds yenta_socket]
rtc                     6908   0  (autoclean)
cloop                   5168   1 
e100                   54208   1 
00_mii                  1952   0 
nfs                    66648   1 
lockd                  47952   1  [nfs]
sunrpc                 62780   1  [nfs lockd]
af_packet              13224   0 
>
>
cu
Martl
>Brad







-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 8+ messages in thread
* [Bluez-users] Toshiba Portege M200 internal bluetooth adapter
@ 2004-03-08  6:36 damou
  2004-03-08  8:17 ` Brad Midgley
  0 siblings, 1 reply; 8+ messages in thread
From: damou @ 2004-03-08  6:36 UTC (permalink / raw)
  To: bluez-users


> Message: 1
> Date: Sun, 07 Mar 2004 00:00:49 -0700
> From: Brad Midgley <bmidgley@xmission.com>
> To: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
> Subject: Re: [Bluez-users] Toshiba Portege M200 internal bluetooth adapter
> 
> Marcel
> 
> dmabt doesn't compile for me unless I make this change (but I'm not 
> totally sure it's the right change):
> 
> --- dmabt-0.2/dmabt.c   Sat Jun  8 10:17:18 2002
> +++ ../dmabt-0.2/dmabt.c        Sat Mar  6 23:46:29 2004
> @@ -37,7 +37,7 @@
>   #include <sys/ioctl.h>              // for ioctl
> 
>   #define TOSH_DEVICE "/dev/toshiba"
> -#define TOSH_SMM _IOWR('t',0x90,24)
> +#define TOSH_SMM _IOWR('t',0x90,SMMRegisters)
> 
>   #define SLEEP 1 // duration of break between activating and attching
>   #define TITLE "DMABTenable Version 0.2\n"
> 
> but even then it doesn't like the result:
> 
> jabbed:/usr/src/dmabt-0.2# ./dmabt
> Can't access Toshiba device /dev/toshiba.
> bmidgley@jabbed:~$ ls -l /dev/toshiba
> crw-rw-rw-    1 root     root      10, 181 2004-03-06 17:07 /dev/toshiba
> 
> jabbed:/usr/src/dmabt-0.2# lsmod|grep tosh
> toshiba_acpi            6108  0
> toshiba                 4672  0
> 
> toshset has an option to turn on bluetooth but it doesn't do anything.
> 
> jabbed:/home/bmidgley# toshset -bluetooth on
> 
> jabbed:/home/bmidgley# more /proc/bus/usb/devices
> 
> T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.3-mh4 uhci_hcd
> S:  Product=UHCI Host Controller
> S:  SerialNumber=0000:00:1d.2
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> 
> T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.3-mh4 uhci_hcd
> S:  Product=UHCI Host Controller
> S:  SerialNumber=0000:00:1d.1
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> 
> T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.3-mh4 uhci_hcd
> S:  Product=UHCI Host Controller
> S:  SerialNumber=0000:00:1d.0
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> 
> T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 6
> B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.3-mh4 ehci_hcd
> S:  Product=EHCI Host Controller
> S:  SerialNumber=0000:00:1d.7
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms
> 
> Does any of this require an APM bios? the M200 can't load the apm kernel 
> mod because it has no APM bios.
> 
> Brad
> 
> >>I'm not totally sure how to use the internal bluetooth on my toshiba
> >>portege m200. I saw reports of "hci_usb + toshiba" for similar models
> >>but I have no idea what that means. usbfs doesn't show anything that
> >>looks like bluetooth but lspci -v reports one device I'm not sure about.
> >>Maybe that's it...
> >>
> >>02:0d.0 System peripheral: Toshiba America Info Systems: Unknown device
> >>0805 (rev 05)
> >>	Subsystem: Toshiba America Info Systems: Unknown device 0001
> >>	Flags: medium devsel, IRQ 11
> >>	Memory at 20000c00 (32-bit, non-prefetchable) [disabled] [size=512]
> >>	Capabilities: [80] Power Management version 2
> >>
> >>Does anyone know if there's a chance it's supported?
> > 
> > 
> > I am sure that your device is supported and I am sure that it is an USB
> > Bluetooth adapter, but you have to activate it first. Take a look at
> > this page
> > 
> > 	http://www.holtmann.org/linux/bluetooth/toshiba.html
> > 
> > and search through the mailing list archives.
> > 
> > Regards
> > 
> > Marcel
> > 
> > 
Hi,

I just checked the Portege M200 with a BT patched Knoppix 3.2(Kernel 2.4.20) and dmabt is working.
You should compile dmabt without any changes in the sourcecode! 
Make sure that you have installed Toshiba Tools before you compile dmabt. 
AFAIK dmabt doesn't work with an ACPI enabled Kernel.

I did the following to activate BT
> dmabt
> hciconfig hci0 up
> hciconfig -a    //to get some informations on stdout

Result:
hci0:	Type: USB 
	BD Address: 00:03:7A:09:AD:06 ACL MTU: 192:8  SCO MTU: 64:8
	UP RUNNING PSCAN ISCAN 
	RX bytes:376 acl:0 sco:0 events:16 errors:0
	TX bytes:305 acl:0 sco:0 commands:15 errors:0
	Features: 0xff 0xff 0x0f 0x00
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
	Link policy: HOLD SNIFF PARK 
	Link mode: SLAVE ACCEPT 
	Name: 'BlueZ (0)'
	Class: 0x000100
	Service Classes: Unspecified
	Device Class: Computer, Uncategorized
	HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
	Manufacturer: Cambridge Silicon Radio (10)

cu
Martl







-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 8+ messages in thread
* [Bluez-users] Toshiba Portege M200 internal bluetooth adapter
@ 2004-03-06 19:46 Brad Midgley
  2004-03-06 23:19 ` Marcel Holtmann
  0 siblings, 1 reply; 8+ messages in thread
From: Brad Midgley @ 2004-03-06 19:46 UTC (permalink / raw)
  To: bluez-users

Hi

I'm not totally sure how to use the internal bluetooth on my toshiba
portege m200. I saw reports of "hci_usb + toshiba" for similar models
but I have no idea what that means. usbfs doesn't show anything that
looks like bluetooth but lspci -v reports one device I'm not sure about.
Maybe that's it...

02:0d.0 System peripheral: Toshiba America Info Systems: Unknown device
0805 (rev 05)
	Subsystem: Toshiba America Info Systems: Unknown device 0001
	Flags: medium devsel, IRQ 11
	Memory at 20000c00 (32-bit, non-prefetchable) [disabled] [size=512]
	Capabilities: [80] Power Management version 2

Does anyone know if there's a chance it's supported?

Brad



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 8+ messages in thread
end of thread, other threads:[~2004-03-09 15:30 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-09 12:26 [Bluez-users] Toshiba Portege M200 internal bluetooth adapter damou
2004-03-09 15:16 ` Brad Midgley
2004-03-09 15:30   ` Marcel Holtmann
  -- strict thread matches above, loose matches on Subject: below --
2004-03-08  6:36 damou
2004-03-08  8:17 ` Brad Midgley
2004-03-06 19:46 Brad Midgley
2004-03-06 23:19 ` Marcel Holtmann
2004-03-07  7:00   ` Brad Midgley

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.