usb-storage

usb-storage

[Luca T.]

Hello,
i would like to understand how hotplugging works, i did some experiments 
but without success.
If i did understand well, when i connect an usb-disk the script 
/etc/hotplug/usb/usb-storage should be fired... but this doesn't seem to 
happen.
I put a line inside it ( echo "test" >/tmp/test ) but the file is never 
created when i plug or unplug my usb-disk.
Why?

Thank you,
  Luca



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

RE: usb-storage

[Sabharwal, Atul]

 
This could be a configuration problem. Udev release 21, sysfs should be
mounted, udev rules in /etc/udev/udev.rules etc. Also, a valid rule in
udev.rules which would program your usb-storage device.

I was seeing the same problem but as I installed the above programs, it
went away.
--
Atul

-------------------------------------------------------------
P.S:  All opinions are my personal opinion(s) & responsibility and do
not represent the view of my employer ( Intel Corporation ).

-----Original Message-----
From: linux-hotplug-devel-admin@lists.sourceforge.net
[mailto:linux-hotplug-devel-admin@lists.sourceforge.net] On Behalf Of
Luca T.
Sent: Tuesday, March 09, 2004 9:11 AM
To: linux-hotplug-devel@lists.sourceforge.net
Subject: usb-storage

Hello,
i would like to understand how hotplugging works, i did some experiments

but without success.
If i did understand well, when i connect an usb-disk the script 
/etc/hotplug/usb/usb-storage should be fired... but this doesn't seem to

happen.
I put a line inside it ( echo "test" >/tmp/test ) but the file is never 
created when i plug or unplug my usb-disk.
Why?

Thank you,
  Luca



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&opÌk
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: usb-storage

[Luca T.]

Sabharwal, Atul wrote:

>This could be a configuration problem. Udev release 21, sysfs should be
>mounted, udev rules in /etc/udev/udev.rules etc. Also, a valid rule in
>udev.rules which would program your usb-storage device.
>
>I was seeing the same problem but as I installed the above programs, it
>went away.
>
Hmmm,
i don't have this udev thing nor sysfs mounted (i believe, not sure).
(Btw, i am running Mandrake 9.2)
So... i do not have udev nor sysfs but still, when i plug my usb-webcam, 
a new icon appears on my desktop. This means that in some way mandrake 
is doing it. I just want to understand how this is happening to make my 
custom scripts run instead.
Since i have /etc/hotplug i thought this was how.
Any idea?

Thanx,
   Luca



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: usb-storage

[Greg KH]

On Tue, Mar 09, 2004 at 06:10:35PM +0100, Luca T. wrote:
> Hello,
> i would like to understand how hotplugging works, i did some experiments 
> but without success.
> If i did understand well, when i connect an usb-disk the script 
> /etc/hotplug/usb/usb-storage should be fired... but this doesn't seem to 
> happen.

What kernel are you using?

> I put a line inside it ( echo "test" >/tmp/test ) but the file is never 
> created when i plug or unplug my usb-disk.
> Why?

On 2.4 that script would only be run when the driver is first loaded.
When the device is removed, the driver is never unloaded.

thanks,

greg k-h


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: usb-storage

[Luca T.]

Ok,
as Greg suggested the script is fired only the first time an usb-disk is 
plugged in.
I verified this by unloading the usb-storage kernel module and then 
plugging in an usb-disk. The script has been executed correctly.
Now, i need a way to detect when an usb-disk is plugged in and out, not 
only the first time, but everytime this happens.
I noticed that not only the usb-storage module isn't unloaded when the 
usb-disk is removed but it also leaves the device-file (for instance 
/dev/sda). So i have no way to know when the disk is removed :(

Any idea that could help me?

Thank you again,
   Luca



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: usb-storage

[Greg KH]

On Tue, Mar 09, 2004 at 11:12:54PM +0100, Luca T. wrote:
> Ok,
> as Greg suggested the script is fired only the first time an usb-disk is 
> plugged in.
> I verified this by unloading the usb-storage kernel module and then 
> plugging in an usb-disk. The script has been executed correctly.
> Now, i need a way to detect when an usb-disk is plugged in and out, not 
> only the first time, but everytime this happens.

You will get a scsi event every time this happens, but this is only in
the 2.6 kernel.  2.4 does not support this.

> I noticed that not only the usb-storage module isn't unloaded when the 
> usb-disk is removed but it also leaves the device-file (for instance 
> /dev/sda). So i have no way to know when the disk is removed :(

Only udev manages the /dev entries, unless you are using devfs.  I'm
guessing you aren't using udev or devfs?  If so, the device nodes are
always there.

Hope this helps,

greg k-h


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: usb-storage

[Luca T.]

Greg KH wrote:

> You will get a scsi event every time this happens, but this is only in
>
>the 2.6 kernel.  2.4 does not support this.
>  
>
:(

>Only udev manages the /dev entries, unless you are using devfs.  I'm
>guessing you aren't using udev or devfs?  If so, the device nodes are
>always there.
>  
>
I'm using devfs, the device-files are dinamically created and removed... 
beside for the usb-disks, they are dinamically created, but not removed 
once the device has been unplugged :(

Thanx,
   Luca



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: usb-storage

[Greg KH]

On Tue, Mar 09, 2004 at 11:49:04PM +0100, Luca T. wrote:
> I'm using devfs, the device-files are dinamically created and removed... 
> beside for the usb-disks, they are dinamically created, but not removed 
> once the device has been unplugged :(

Then go bug the devfs developers :)

Good luck,

greg k-h


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: usb-storage

[Mika Penttilä]

Greg KH wrote:

>On Tue, Mar 09, 2004 at 06:10:35PM +0100, Luca T. wrote:
>  
>
>>Hello,
>>i would like to understand how hotplugging works, i did some experiments 
>>but without success.
>>If i did understand well, when i connect an usb-disk the script 
>>/etc/hotplug/usb/usb-storage should be fired... but this doesn't seem to 
>>happen.
>>    
>>
>
>What kernel are you using?
>
>  
>
>>I put a line inside it ( echo "test" >/tmp/test ) but the file is never 
>>created when i plug or unplug my usb-disk.
>>Why?
>>    
>>
>
>On 2.4 that script would only be run when the driver is first loaded.
>When the device is removed, the driver is never unloaded.
>
>thanks,
>
>greg k-h
>  
>
At least with recent hotplug packages user mode drivers are loaded even 
if kernel module is loaded or not, in 2.4 and 2.6.

--Mika




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

usb-storage

[Thorsten Alge]

hi,

i have some problems with my USB-Harddisk. When i plug it in, i got the
following errors:

hub.c: new USB device 00:09.3-6.1, assigned address 3
usb.c: USB device 3 (vend/prod 0x5e3/0x702) is not claimed by any active
driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
  Vendor: FUJITSU   Model: MHR2030AT         Rev: 0811
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
 sda:<6>Device not ready.  Make sure there is a disc in the drive.
usb_control/bulk_msg: timeout
...
usb_control/bulk_msg: timeout

I dont know how to fix it. can anyone help??


thanks, 

thorsten


-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Re: usb-storage

[pa3gcu]

On Monday 02 February 2004 17:59, Thorsten Alge wrote:
> hi,
>
> i have some problems with my USB-Harddisk. When i plug it in, i got the
> following errors:

I personally have never encounderd your problem, but i did a search on 
google.com/linux and found the following mail, it represents your problem in 
many ways, it also has a solution suggested as well.

http://mailman.u.washington.edu/pipermail/linux/2002-November/005302.html

> hub.c: new USB device 00:09.3-6.1, assigned address 3
> usb.c: USB device 3 (vend/prod 0x5e3/0x702) is not claimed by any active
> driver.
> Initializing USB Mass Storage driver...
> usb.c: registered new driver usb-storage
> scsi1 : SCSI emulation for USB Mass Storage devices
>   Vendor: FUJITSU   Model: MHR2030AT         Rev: 0811
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
> SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
>  sda:<6>Device not ready.  Make sure there is a disc in the drive.
> usb_control/bulk_msg: timeout
> ...
> usb_control/bulk_msg: timeout
>
> I dont know how to fix it. can anyone help??
>
>
> thanks,
>
> thorsten
>

-- 
If the Linux community is a bunch of theives because they
try to imitate windows programs, then the Windows community
is built on organized crime.

Regards Richard
pa3gcu@zeelandnet.nl
http://people.zeelandnet.nl/pa3gcu/



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs