[PATCH 2/6] ARM: rockchip: add debug uart used by rk3288

[heiko@sntech.de (Heiko Stübner)]

Am Dienstag, 15. Juli 2014, 21:13:10 schrieb Doug Anderson:
> Heiko,
> 
> On Tue, Jul 15, 2014 at 4:00 PM, Heiko St?bner <heiko@sntech.de> wrote:
> > The uarts on rk3288 are still compatible with the dw_8250, but located
> > at a different position and need DEBUG_UART_8250_WORD enabled.
> > 
> > Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> > ---
> > 
> >  arch/arm/Kconfig.debug | 12 +++++++++++-
> >  1 file changed, 11 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> > index 8f90595..f68def0 100644
> > --- a/arch/arm/Kconfig.debug
> > +++ b/arch/arm/Kconfig.debug
> > @@ -613,6 +613,14 @@ choice
> > 
> >                   Say Y here if you want kernel low-level debugging
> >                   support
> >                   on Rockchip based platforms.
> > 
> > +       config DEBUG_RK32_UART2
> 
> It's slightly confusing that you didn't rename the old "DEBUG_RK3X_UART2".

My problem is, to what :-) ... DEBUG_RK30_UART2 ?

RK30xx and RK31xx share these, but I guess at least the description should be 
adapted.


> 
> Other than that:
> 
> Reviewed-by: Doug Anderson <dianders@chromium.org>
> Tested-by: Doug Anderson <dianders@chromium.org>