From: Janos Makadi <maki@freemail.hu>
To: linux-kernel@vger.kernel.org
Subject: Serial card
Date: Sat, 20 Mar 2004 16:37:33 +0100 [thread overview]
Message-ID: <405C653D.10008@freemail.hu> (raw)
Hello,
I have a SWEEX i/o CARD, which has two serial, and one paralell ports.
On the board is a Netmos (Moschip) Nm9835cv. Is it possible to use this
card with the 2.6 series kernel? I`m searching on the net two days now,
but didn`t found any information. Using setserial for setup failed.
lspci -v :
00:0b.0 Communication controller: Unknown device 9710:9835 (rev 01)
Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown device 0012
Flags: medium devsel, IRQ 11
I/O ports at b400 [disabled] [size=8]
I/O ports at b000 [disabled] [size=8]
I/O ports at a800 [disabled] [size=8]
I/O ports at a400 [disabled] [size=8]
I/O ports at a000 [disabled] [size=8]
I/O ports at 9800 [disabled] [size=16]
/proc/pci :
Bus 0, device 11, function 0:
Communication controller: NetMos Technology 222N-2 I/O Card (2S+1P)
(rev 1).
IRQ 11.
Master Capable. Latency=32.
I/O at 0xb400 [0xb407].
I/O at 0xb000 [0xb007].
I/O at 0xa800 [0xa807].
I/O at 0xa400 [0xa407].
I/O at 0xa000 [0xa007].
I/O at 0x9800 [0x980f].
Regards,
Janos
reply other threads:[~2004-03-20 15:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=405C653D.10008@freemail.hu \
--to=maki@freemail.hu \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.