* Serial card
@ 2004-03-20 15:37 Janos Makadi
0 siblings, 0 replies; only message in thread
From: Janos Makadi @ 2004-03-20 15:37 UTC (permalink / raw)
To: linux-kernel
Hello,
I have a SWEEX i/o CARD, which has two serial, and one paralell ports.
On the board is a Netmos (Moschip) Nm9835cv. Is it possible to use this
card with the 2.6 series kernel? I`m searching on the net two days now,
but didn`t found any information. Using setserial for setup failed.
lspci -v :
00:0b.0 Communication controller: Unknown device 9710:9835 (rev 01)
Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown device 0012
Flags: medium devsel, IRQ 11
I/O ports at b400 [disabled] [size=8]
I/O ports at b000 [disabled] [size=8]
I/O ports at a800 [disabled] [size=8]
I/O ports at a400 [disabled] [size=8]
I/O ports at a000 [disabled] [size=8]
I/O ports at 9800 [disabled] [size=16]
/proc/pci :
Bus 0, device 11, function 0:
Communication controller: NetMos Technology 222N-2 I/O Card (2S+1P)
(rev 1).
IRQ 11.
Master Capable. Latency=32.
I/O at 0xb400 [0xb407].
I/O at 0xb000 [0xb007].
I/O at 0xa800 [0xa807].
I/O at 0xa400 [0xa407].
I/O at 0xa000 [0xa007].
I/O at 0x9800 [0x980f].
Regards,
Janos
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-03-20 15:33 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-20 15:37 Serial card Janos Makadi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.