* [linux-lvm] How do I pvresize? @ 2004-03-21 21:01 Glen Harris 2004-03-22 21:10 ` David Mohr 0 siblings, 1 reply; 5+ messages in thread From: Glen Harris @ 2004-03-21 21:01 UTC (permalink / raw) To: linux-lvm We started running out of space on our backup server, so I bought a couple of new 250Gb disks, added them to the 16 bay FC RAID array and expanded the RAID, followed by the slice. I then went to expand the PV, and got a "Command not implemented yet." message. This is a problem. This is a *BIG* problem. What are my options, short of destroying the volume and starting from scratch? ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-lvm] How do I pvresize? 2004-03-21 21:01 [linux-lvm] How do I pvresize? Glen Harris @ 2004-03-22 21:10 ` David Mohr 2004-03-22 21:41 ` Glen Harris 0 siblings, 1 reply; 5+ messages in thread From: David Mohr @ 2004-03-22 21:10 UTC (permalink / raw) To: LVM general discussion and development I'm pretty new to LVM, so take my comment with a grain of salt. Why do you need to resize the PV at all? If you need more space, create a new PV and add it to the LV, that should do the trick. ~David On Sun, 2004-03-21 at 15:01, Glen Harris wrote: > We started running out of space on our backup server, so I bought a > couple of new 250Gb disks, added them to the 16 bay FC RAID array > and expanded the RAID, followed by the slice. > > I then went to expand the PV, and got a "Command not implemented yet." > message. > > This is a problem. This is a *BIG* problem. > > What are my options, short of destroying the volume and starting > from scratch? > _______________________________________________ > linux-lvm mailing list > linux-lvm@redhat.com > https://www.redhat.com/mailman/listinfo/linux-lvm > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-lvm] How do I pvresize? 2004-03-22 21:10 ` David Mohr @ 2004-03-22 21:41 ` Glen Harris 2004-03-23 9:37 ` Chris Laycock 0 siblings, 1 reply; 5+ messages in thread From: Glen Harris @ 2004-03-22 21:41 UTC (permalink / raw) To: LVM general discussion and development I have already expanded the RAID slice by 250Gb, and now have a /dev/sda which is 250Gb larger than it was before. I now cannot remove that disk without either rebuilding the RAID on the hot spare(back to square one) or destroying the RAID. Please, can someone help me? David Mohr wrote: > I'm pretty new to LVM, so take my comment with a grain of salt. > > Why do you need to resize the PV at all? If you need more space, create > a new PV and add it to the LV, that should do the trick. > > ~David > > On Sun, 2004-03-21 at 15:01, Glen Harris wrote: > >>We started running out of space on our backup server, so I bought a >>couple of new 250Gb disks, added them to the 16 bay FC RAID array >>and expanded the RAID, followed by the slice. >> >>I then went to expand the PV, and got a "Command not implemented yet." >>message. >> >>This is a problem. This is a *BIG* problem. >> >>What are my options, short of destroying the volume and starting >>from scratch? >>_______________________________________________ >>linux-lvm mailing list >>linux-lvm@redhat.com >>https://www.redhat.com/mailman/listinfo/linux-lvm >>read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ >> > > > _______________________________________________ > linux-lvm mailing list > linux-lvm@redhat.com > https://www.redhat.com/mailman/listinfo/linux-lvm > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-lvm] How do I pvresize? 2004-03-22 21:41 ` Glen Harris @ 2004-03-23 9:37 ` Chris Laycock 2004-03-23 21:18 ` Glen Harris 0 siblings, 1 reply; 5+ messages in thread From: Chris Laycock @ 2004-03-23 9:37 UTC (permalink / raw) To: LVM general discussion and development [-- Attachment #1: Type: text/plain, Size: 2436 bytes --] Glen, If you do a pvscan do you get 'PV "/dev/sda1" etc' or 'PV "/dev/sda" etc' If you get the former could you not create /dev/sda2 with the extra 250GB and add that to the LV as a separate PV I'm assuming that you can have different partitions on the same array (actual disk) defined as separate PVs I may be completely off track here, please feel free to correct..... Regards, Chris. ------------------- Chris Laycock IT Specialist IBM Global Services (IDO) LITS, Stevenage Mail point: K3 STEV UK Email: LaycockC@uk.ibm.com Tel : (01438) 76-9460 (internal: 44-9460) Please respond to LVM general discussion and development <linux-lvm@redhat.com> Sent by: linux-lvm-bounces@redhat.com To: LVM general discussion and development <linux-lvm@redhat.com> cc: Subject: Re: [linux-lvm] How do I pvresize? I have already expanded the RAID slice by 250Gb, and now have a /dev/sda which is 250Gb larger than it was before. I now cannot remove that disk without either rebuilding the RAID on the hot spare(back to square one) or destroying the RAID. Please, can someone help me? David Mohr wrote: > I'm pretty new to LVM, so take my comment with a grain of salt. > > Why do you need to resize the PV at all? If you need more space, create > a new PV and add it to the LV, that should do the trick. > > ~David > > On Sun, 2004-03-21 at 15:01, Glen Harris wrote: > >>We started running out of space on our backup server, so I bought a >>couple of new 250Gb disks, added them to the 16 bay FC RAID array >>and expanded the RAID, followed by the slice. >> >>I then went to expand the PV, and got a "Command not implemented yet." >>message. >> >>This is a problem. This is a *BIG* problem. >> >>What are my options, short of destroying the volume and starting >>from scratch? >>_______________________________________________ >>linux-lvm mailing list >>linux-lvm@redhat.com >>https://www.redhat.com/mailman/listinfo/linux-lvm >>read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ >> > > > _______________________________________________ > linux-lvm mailing list > linux-lvm@redhat.com > https://www.redhat.com/mailman/listinfo/linux-lvm > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ [-- Attachment #2: Type: text/html, Size: 3614 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-lvm] How do I pvresize? 2004-03-23 9:37 ` Chris Laycock @ 2004-03-23 21:18 ` Glen Harris 0 siblings, 0 replies; 5+ messages in thread From: Glen Harris @ 2004-03-23 21:18 UTC (permalink / raw) To: LVM general discussion and development No, I used the raw device sda. I didn't bother partitioning it, as I knew I could expand the raid, and grow the PV just like I did back with LVM-1. glen. Chris Laycock wrote: > > Glen, > > If you do a pvscan do you get 'PV "/dev/sda1" etc' or 'PV "/dev/sda" > etc' > If you get the former could you not create /dev/sda2 with the extra > 250GB and add that to the LV as a separate PV > I'm assuming that you can have different partitions on the same array > (actual disk) defined as separate PVs > I may be completely off track here, please feel free to correct..... > > Regards, > > Chris. > > ------------------- > Chris Laycock > IT Specialist > IBM Global Services (IDO) > > LITS, Stevenage > Mail point: K3 STEV UK > Email: LaycockC@uk.ibm.com > Tel : (01438) 76-9460 (internal: 44-9460) > > Please respond to LVM general discussion and development > <linux-lvm@redhat.com> > > Sent by: linux-lvm-bounces@redhat.com > > To: LVM general discussion and development <linux-lvm@redhat.com> > cc: > Subject: Re: [linux-lvm] How do I pvresize? > > > I have already expanded the RAID slice by 250Gb, and now have a > /dev/sda which is 250Gb larger than it was before. > > I now cannot remove that disk without either rebuilding the RAID > on the hot spare(back to square one) or destroying the RAID. > > Please, can someone help me? > > David Mohr wrote: > > I'm pretty new to LVM, so take my comment with a grain of salt. > > > > Why do you need to resize the PV at all? If you need more space, create > > a new PV and add it to the LV, that should do the trick. > > > > ~David > > > > On Sun, 2004-03-21 at 15:01, Glen Harris wrote: > > > >>We started running out of space on our backup server, so I bought a > >>couple of new 250Gb disks, added them to the 16 bay FC RAID array > >>and expanded the RAID, followed by the slice. > >> > >>I then went to expand the PV, and got a "Command not implemented yet." > >>message. > >> > >>This is a problem. This is a *BIG* problem. > >> > >>What are my options, short of destroying the volume and starting > >>from scratch? > >>_______________________________________________ > >>linux-lvm mailing list > >>linux-lvm@redhat.com > >>https://www.redhat.com/mailman/listinfo/linux-lvm > >>read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ > >> > > > > > > _______________________________________________ > > linux-lvm mailing list > > linux-lvm@redhat.com > > https://www.redhat.com/mailman/listinfo/linux-lvm > > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ > _______________________________________________ > linux-lvm mailing list > linux-lvm@redhat.com > https://www.redhat.com/mailman/listinfo/linux-lvm > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ > > > ------------------------------------------------------------------------ > > _______________________________________________ > linux-lvm mailing list > linux-lvm@redhat.com > https://www.redhat.com/mailman/listinfo/linux-lvm > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2004-03-23 21:18 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2004-03-21 21:01 [linux-lvm] How do I pvresize? Glen Harris 2004-03-22 21:10 ` David Mohr 2004-03-22 21:41 ` Glen Harris 2004-03-23 9:37 ` Chris Laycock 2004-03-23 21:18 ` Glen Harris
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.