RPM failures when using 2.6.X kernels on RH9

RPM failures when using 2.6.X kernels on RH9

[Peter Williams]

When attempting to install RPM packages on RH9 using any 2.6.X kernel I 
get the following error messages:

[peterw@mudlark KERNELS]$ sudo rpm -i 
/home/peterw/Downloads/atrpms-29-1.rh9.at.noarch.rpm
rpmdb: unable to join the environment
error: db4 error(11) from dbenv->open: Resource temporarily unavailable
error: cannot open Packages index using db3 - Resource temporarily 
unavailable (11)
error: cannot open Packages database in /var/lib/rpm
warning: /home/peterw/Downloads/atrpms-29-1.rh9.at.noarch.rpm: V3 DSA 
signature: NOKEY, key ID 66534c2b
rpmdb: unable to join the environment
error: db4 error(11) from dbenv->open: Resource temporarily unavailable
error: cannot open Packages database in /var/lib/rpm
[peterw@mudlark KERNELS]$

If I revert to a 2.4.X kernel the package installs without any problems.

Can anyone enlighten me to a likely cause for this phenomenon?

Peter
-- 
Dr Peter Williams, Chief Scientist                peterw@aurema.com
Aurema Pty Limited                                Tel:+61 2 9698 2322
PO Box 305, Strawberry Hills NSW 2012, Australia  Fax:+61 2 9699 9174
79 Myrtle Street, Chippendale NSW 2008, Australia http://www.aurema.com

Re: RPM failures when using 2.6.X kernels on RH9

[Linus Torvalds]

On Thu, 25 Mar 2004, Peter Williams wrote:
>
> When attempting to install RPM packages on RH9 using any 2.6.X kernel I 
> get the following error messages:

Yes. Buggy rpm binary which tries to use direct-IO without proper 
alignment etc. 

Work around by doing

	export LD_ASSUME_KERNEL=2.4.1

and then upgrade to a fixed rpm binary as quickly as possible.

		Linus