From: ada@thorsis.com (Alexander Dahl)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/6] clocksource: rework Atmel TCB timer driver
Date: Wed, 28 Mar 2018 12:29:20 +0200 [thread overview]
Message-ID: <4073350.0MmxRoANOi@ada> (raw)
In-Reply-To: <989df8a3-462a-c645-87f1-9f956e1b22c9@linaro.org>
Hello Daniel,
Am Dienstag, 27. M?rz 2018, 13:30:22 CEST schrieb Daniel Lezcano:
> Can you can give a rough amount for the irq rate on the timer ?
I used itop [1] now to get a rough estimate. First with kernel v4.14.29-rt25
(fully preempt RT):
INT NAME RATE MAX
19 [ vel tc_clkevt] 397 Ints/s (max: 432)
26 [ vel eth0] 4 Ints/s (max: 38)
Next test with kernel v4.15.13 gives (slightly slower, but non-RT):
INT NAME RATE MAX
19 [ vel tc_clkevt] 248 Ints/s (max: 273)
26 [ vel eth0] 4 Ints/s (max: 11)
With kernel v4.16-rc7 plus this patch series and tcb as clocksource:
INT NAME RATE MAX
17 [vel timer at fffa] 2164 Ints/s (max: 2183)
26 [ vel eth0] 5 Ints/s (max: 10)
Is this the information you wanted? If not, could you point me on how to get
the requested irq rate?
Greets
Alex
[1] https://packages.debian.org/stretch/itop
WARNING: multiple messages have this Message-ID (diff)
From: Alexander Dahl <ada@thorsis.com>
To: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
linux-kernel@vger.kernel.org,
Boris Brezillon <boris.brezillon@bootlin.com>,
Thomas Gleixner <tglx@linutronix.de>
Subject: Re: [PATCH v3 0/6] clocksource: rework Atmel TCB timer driver
Date: Wed, 28 Mar 2018 12:29:20 +0200 [thread overview]
Message-ID: <4073350.0MmxRoANOi@ada> (raw)
In-Reply-To: <989df8a3-462a-c645-87f1-9f956e1b22c9@linaro.org>
Hello Daniel,
Am Dienstag, 27. März 2018, 13:30:22 CEST schrieb Daniel Lezcano:
> Can you can give a rough amount for the irq rate on the timer ?
I used itop [1] now to get a rough estimate. First with kernel v4.14.29-rt25
(fully preempt RT):
INT NAME RATE MAX
19 [ vel tc_clkevt] 397 Ints/s (max: 432)
26 [ vel eth0] 4 Ints/s (max: 38)
Next test with kernel v4.15.13 gives (slightly slower, but non-RT):
INT NAME RATE MAX
19 [ vel tc_clkevt] 248 Ints/s (max: 273)
26 [ vel eth0] 4 Ints/s (max: 11)
With kernel v4.16-rc7 plus this patch series and tcb as clocksource:
INT NAME RATE MAX
17 [vel timer@fffa] 2164 Ints/s (max: 2183)
26 [ vel eth0] 5 Ints/s (max: 10)
Is this the information you wanted? If not, could you point me on how to get
the requested irq rate?
Greets
Alex
[1] https://packages.debian.org/stretch/itop
next prev parent reply other threads:[~2018-03-28 10:29 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-23 17:15 [PATCH v3 0/6] clocksource: rework Atmel TCB timer driver Alexandre Belloni
2018-02-23 17:15 ` Alexandre Belloni
2018-02-23 17:15 ` [PATCH v3 1/6] ARM: at91: add TCB registers definitions Alexandre Belloni
2018-02-23 17:15 ` Alexandre Belloni
2018-02-23 17:15 ` [PATCH v3 2/6] clocksource/drivers: Add a new driver for the Atmel ARM TC blocks Alexandre Belloni
2018-02-23 17:15 ` Alexandre Belloni
2018-02-23 17:15 ` [PATCH v3 3/6] clocksource/drivers: atmel-pit: make option silent Alexandre Belloni
2018-02-23 17:15 ` Alexandre Belloni
2018-02-23 17:15 ` [PATCH v3 4/6] ARM: at91: Implement clocksource selection Alexandre Belloni
2018-02-23 17:15 ` Alexandre Belloni
2018-02-23 17:15 ` [PATCH v3 5/6] ARM: configs: at91: use new TCB timer driver Alexandre Belloni
2018-02-23 17:15 ` Alexandre Belloni
2018-02-23 17:15 ` [PATCH v3 6/6] ARM: configs: at91: unselect PIT Alexandre Belloni
2018-02-23 17:15 ` Alexandre Belloni
2018-03-22 15:33 ` [PATCH v3 0/6] clocksource: rework Atmel TCB timer driver Alexandre Belloni
2018-03-22 15:33 ` Alexandre Belloni
2018-03-27 10:41 ` Alexander Dahl
2018-03-27 10:41 ` Alexander Dahl
2018-03-27 11:30 ` Daniel Lezcano
2018-03-27 11:30 ` Daniel Lezcano
2018-03-28 10:29 ` Alexander Dahl [this message]
2018-03-28 10:29 ` Alexander Dahl
2018-03-28 13:03 ` Daniel Lezcano
2018-03-28 13:03 ` Daniel Lezcano
2018-03-28 14:16 ` Alexandre Belloni
2018-03-28 14:16 ` Alexandre Belloni
2018-03-28 14:36 ` Daniel Lezcano
2018-03-28 14:36 ` Daniel Lezcano
2018-03-28 15:31 ` Alexandre Belloni
2018-03-28 15:31 ` Alexandre Belloni
2018-03-28 15:50 ` Alexandre Belloni
2018-03-28 15:50 ` Alexandre Belloni
2018-03-29 8:01 ` Alexander Dahl
2018-03-29 8:01 ` Alexander Dahl
2018-03-29 10:45 ` Alexandre Belloni
2018-03-29 10:45 ` Alexandre Belloni
2018-03-29 11:31 ` Alexander Dahl
2018-03-29 11:31 ` Alexander Dahl
2018-03-29 11:42 ` Alexandre Belloni
2018-03-29 11:42 ` Alexandre Belloni
2018-03-29 12:07 ` Daniel Lezcano
2018-03-29 12:07 ` Daniel Lezcano
2018-03-29 13:02 ` Alexandre Belloni
2018-03-29 13:02 ` Alexandre Belloni
2018-03-29 15:11 ` Alexander Dahl
2018-03-29 15:11 ` Alexander Dahl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4073350.0MmxRoANOi@ada \
--to=ada@thorsis.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.