* [lm-sensors] Need Help, Ubutnu 7.1, Asus K8V-MX, AMD 3000+,
@ 2008-02-26 19:43 Martin Wegener
2008-02-28 19:48 ` Martin Wegener
2008-03-01 0:17 ` Matt Roberds
0 siblings, 2 replies; 3+ messages in thread
From: Martin Wegener @ 2008-02-26 19:43 UTC (permalink / raw)
To: lm-sensors
Hello,
I've got a problem using lm-sensors with my computer.
I'm on Ubutnu 7.1 (64bit version; 2.6.22-14-generic), with an Asus K8V-MX mainboard(AMD64 3000+) and a Zalman CNPS7000A cooler.
First I just installed lm-sensors with 'sudo apt-get install lm-sensors'
worked without a problem. Then I did 'sudo sensors-detect' and answered all questions with yes.
But 'sudo pwmconfig' told me to check my fans:
------------------------------------------------
Found the following devices:
hwmon0/device is k8temp
hwmon1/device is w83627ehf
Found the following PWM controls:
hwmon1/device/pwm1
hwmon1/device/pwm1_enable stuck to 1
Failed to set pwmhwmon1/device/pwm1 to full speed
Something's wrong, check your fans!
------------------------------------------------
This is what 'sudo sensors' told me:
------------------------------------------------
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
+24°C
w83627ehf-isa-0290
Adapter: ISA adapter
VCore: +1.15 V (min = +0.00 V, max = +1.74 V)
in1: +12.41 V (min = +8.29 V, max = +12.62 V)
AVCC: +3.23 V (min = +3.60 V, max = +4.08 V) ALARM
3VCC: +3.15 V (min = +3.06 V, max = +4.08 V)
in4: +1.62 V (min = +1.78 V, max = +2.01 V) ALARM
in5: +1.73 V (min = +0.31 V, max = +1.77 V)
in6: +5.58 V (min = +5.50 V, max = +0.64 V) ALARM
VSB: +3.15 V (min = +4.08 V, max = +3.60 V) ALARM
VBAT: +2.03 V (min = +1.17 V, max = +1.52 V) ALARM
in9: +1.63 V (min = +0.42 V, max = +1.53 V) ALARM
Case Fan: 0 RPM (min = 42 RPM, div = 128) ALARM
CPU Fan: 2678 RPM (min = 1875 RPM, div = 4)
Aux Fan: 0 RPM (min = 48 RPM, div = 128) ALARM
fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM
Sys Temp: +30°C (high = +93°C, hyst = -88°C)
CPU Temp: +21.0°C (high = +80.0°C, hyst = +75.0°C)
AUX Temp: +28.5°C (high = +80.0°C, hyst = +75.0°C)
-----------------------------------------------------
But becaus of pwmconfig was not working, fancontrol wasn't able to do anything:
----------------------------------------------------
Loading configuration from /etc/fancontrol ...
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
Some mandatory settings missing, please check your config file!
----------------------------------------------------
So I decided to use the Subversion to get the newest lm-sensors source.
This is the result:
'sudo sensors'
------------------------------------------------------------------
w83627ehf-isa-0290
Adapter: ISA adapter
VCore: +1.14 V (min = +0.00 V, max = +1.74 V)
in1: +12.36 V (min = +8.29 V, max = +12.62 V)
AVCC: +3.18 V (min = +3.60 V, max = +4.08 V) ALARM
3VCC: +3.18 V (min = +1.01 V, max = +4.08 V)
in4: +1.63 V (min = +1.66 V, max = +2.01 V) ALARM
in5: +1.73 V (min = +0.31 V, max = +1.77 V)
in6: +5.63 V (min = +5.50 V, max = +0.64 V) ALARM
VSB: +3.18 V (min = +4.05 V, max = +3.60 V) ALARM
VBAT: +2.03 V (min = +1.17 V, max = +1.52 V) ALARM
in9: +1.62 V (min = +0.42 V, max = +1.53 V) ALARM
Case Fan: 0 RPM (min = 42 RPM, div = 128) ALARM
CPU Fan: 2700 RPM (min = 3750 RPM, div = 2) ALARM
Aux Fan: 0 RPM (min = 48 RPM, div = 128) ALARM
fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM
Sys Temp: +38.0°C (high = +93.0°C, hyst = -88.0°C)
CPU Temp: +28.5°C (high = +80.0°C, hyst = +75.0°C)
AUX Temp: +35.0°C (high = +80.0°C, hyst = +75.0°C)
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +33.0°C
--------------------------------------------------------------
'sudo pwmconfig'
--------------------------------------------------------------
Found the following devices:
hwmon0/device is k8temp
hwmon1/device is w83627ehf
Found the following PWM controls:
hwmon1/device/pwm1
hwmon1/device/pwm1 stuck to 0
Manual control mode not supported, skipping hwmon1/device/pwm1.
hwmon1/device/pwm2
hwmon1/device/pwm2 stuck to 0
Manual control mode not supported, skipping hwmon1/device/pwm2.
hwmon1/device/pwm3
hwmon1/device/pwm3 stuck to 0
Manual control mode not supported, skipping hwmon1/device/pwm3.
There are no usable PWM outputs.
--------------------------------------------------------------
Speedstepping works without I probelm (when Cool and Quiet support is activated in the bios)
I've installed the newest bios, but it didn't help me.
And my bios it self does not give the the possibility to control my CPU-fan speed
(There is nothing like Q-fan).
So what am I doing wrong?
Thanks for your help,
Martin W.
'sudo lsmod':
-----------------------------------------------------------------------------------
Module Size Used by
ipv6 317192 8
af_packet 28172 2
rfcomm 47656 2
l2cap 28672 11 rfcomm
bluetooth 63876 4 rfcomm,l2cap
ppdev 11272 0
ac 7304 0
container 6400 0
dock 12264 0
video 21140 0
button 10400 0
sbs 21520 0
battery 12424 0
powernow_k8 16608 0
cpufreq_ondemand 10896 1
cpufreq_userspace 6048 0
cpufreq_powersave 3072 0
cpufreq_conservative 9608 0
cpufreq_stats 8160 0
freq_table 6464 3 powernow_k8,cpufreq_ondemand,cpufreq_stats
w83627ehf 24464 0
i2c_isa 6400 1 w83627ehf
sbp2 27144 0
lp 15048 0
tda827x 9348 1
saa7134_alsa 17440 0
saa7134_dvb 21004 0
dvb_pll 18436 1 saa7134_dvb
video_buf_dvb 8708 1 saa7134_dvb
dvb_core 94768 1 video_buf_dvb
tda1004x 18692 2 saa7134_dvb
tuner 70184 0
snd_via82xx 33192 1
gameport 18704 1 snd_via82xx
snd_mpu401_uart 11008 1 snd_via82xx
snd_seq_dummy 5380 0
snd_seq_oss 36864 0
snd_seq_midi 11008 0
snd_rawmidi 29824 2 snd_mpu401_uart,snd_seq_midi
usbhid 32576 0
nvidia 7013492 34
hid 33408 1 usbhid
saa7134 148308 2 saa7134_alsa,saa7134_dvb
snd_via82xx_modem 18444 0
snd_ac97_codec 122200 2 snd_via82xx,snd_via82xx_modem
video_buf 30084 4 saa7134_alsa,saa7134_dvb,video_buf_dvb,saa7134
compat_ioctl32 11136 1 saa7134
snd_seq_midi_event 9984 2 snd_seq_oss,snd_seq_midi
parport_pc 41896 1
pcmcia 46232 0
ac97_bus 4096 1 snd_ac97_codec
snd_pcm_oss 50048 0
snd_mixer_oss 20096 1 snd_pcm_oss
ir_kbd_i2c 11536 1 saa7134
snd_seq 62496 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_seq_device 10260 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
psmouse 45596 0
parport 44172 3 ppdev,lp,parport_pc
snd_pcm 94344 5 saa7134_alsa,snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss
snd_timer 27272 2 snd_seq,snd_pcm
ir_common 38916 2 saa7134,ir_kbd_i2c
i2c_viapro 11544 0
pcspkr 4608 0
serio_raw 9092 0
videodev 31360 1 saa7134
v4l2_common 21888 4 tuner,saa7134,compat_ioctl32,videodev
v4l1_compat 15364 2 saa7134,videodev
k8temp 7680 0
snd_page_alloc 12560 3 snd_via82xx,snd_via82xx_modem,snd_pcm
snd 69288 15 saa7134_alsa,snd_via82xx,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_pcm,snd_timer
soundcore 10272 1 snd
shpchp 38300 0
i2c_core 30208 11 w83627ehf,i2c_isa,tda827x,saa7134_dvb,dvb_pll,tda1004x,tuner,nvidia,saa7134,ir_kbd_i2c,i2c_viapro
yenta_socket 30220 1
rsrc_nonstatic 14208 1 yenta_socket
pcmcia_core 46628 3 pcmcia,yenta_socket,rsrc_nonstatic
pci_hotplug 36612 1 shpchp
evdev 13056 4
ext3 146576 7
jbd 69360 1 ext3
mbcache 11272 1 ext3
ide_cd 35488 0
cdrom 41768 1 ide_cd
ide_disk 20352 9
ata_generic 9988 0
floppy 69608 0
ehci_hcd 40076 0
via_rhine 28936 0
mii 7424 1 via_rhine
uhci_hcd 29600 0
usbcore 161584 4 usbhid,ehci_hcd,uhci_hcd
sata_via 14596 0
libata 138928 2 ata_generic,sata_via
scsi_mod 172856 2 sbp2,libata
via82cxxx 11268 0 [permanent]
ide_core 141200 3 ide_cd,ide_disk,via82cxxx
ohci1394 38984 0
ieee1394 109528 2 sbp2,ohci1394
thermal 16528 0
processor 36232 2 powernow_k8,thermal
fan 6920 0
fuse 52528 1
apparmor 47008 0
commoncap 9472 1 apparmor
-----------------------------------------------------------------------------------
'sudo lspci':
-----------------------------------------------------------------------------------
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
00:0c.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
00:0d.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5500] (rev a1)
-----------------------------------------------------------------------------------
_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten!
Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc\x021114
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
* [lm-sensors] Need Help, Ubutnu 7.1, Asus K8V-MX, AMD 3000+,
2008-02-26 19:43 [lm-sensors] Need Help, Ubutnu 7.1, Asus K8V-MX, AMD 3000+, Martin Wegener
@ 2008-02-28 19:48 ` Martin Wegener
2008-03-01 0:17 ` Matt Roberds
1 sibling, 0 replies; 3+ messages in thread
From: Martin Wegener @ 2008-02-28 19:48 UTC (permalink / raw)
To: lm-sensors
Hello,
I've got a problem using lm-sensors with my computer.
I'm on Ubutnu 7.1 (64bit version; 2.6.22-14-generic), with an Asus K8V-MX mainboard(AMD64 3000+) and a Zalman CNPS7000A cooler.
First I just installed lm-sensors with 'sudo apt-get install lm-sensors'
worked without a problem. Then I did 'sudo sensors-detect' and answered all questions with yes.
But 'sudo pwmconfig' told me to check my fans:
------------------------------------------------
Found the following devices:
hwmon0/device is k8temp
hwmon1/device is w83627ehf
Found the following PWM controls:
hwmon1/device/pwm1
hwmon1/device/pwm1_enable stuck to 1
Failed to set pwmhwmon1/device/pwm1 to full speed
Something's wrong, check your fans!
------------------------------------------------
This is what 'sudo sensors' told me:
------------------------------------------------
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
+24°C
w83627ehf-isa-0290
Adapter: ISA adapter
VCore: +1.15 V (min = +0.00 V, max = +1.74 V)
in1: +12.41 V (min = +8.29 V, max = +12.62 V)
AVCC: +3.23 V (min = +3.60 V, max = +4.08 V) ALARM
3VCC: +3.15 V (min = +3.06 V, max = +4.08 V)
in4: +1.62 V (min = +1.78 V, max = +2.01 V) ALARM
in5: +1.73 V (min = +0.31 V, max = +1.77 V)
in6: +5.58 V (min = +5.50 V, max = +0.64 V) ALARM
VSB: +3.15 V (min = +4.08 V, max = +3.60 V) ALARM
VBAT: +2.03 V (min = +1.17 V, max = +1.52 V) ALARM
in9: +1.63 V (min = +0.42 V, max = +1.53 V) ALARM
Case Fan: 0 RPM (min = 42 RPM, div = 128) ALARM
CPU Fan: 2678 RPM (min = 1875 RPM, div = 4)
Aux Fan: 0 RPM (min = 48 RPM, div = 128) ALARM
fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM
Sys Temp: +30°C (high = +93°C, hyst = -88°C)
CPU Temp: +21.0°C (high = +80.0°C, hyst = +75.0°C)
AUX Temp: +28.5°C (high = +80.0°C, hyst = +75.0°C)
-----------------------------------------------------
But becaus of pwmconfig was not working, fancontrol wasn't able to do anything:
----------------------------------------------------
Loading configuration from /etc/fancontrol ...
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
grep: /etc/fancontrol: No such file or directory
Some mandatory settings missing, please check your config file!
----------------------------------------------------
So I decided to use the Subversion to get the newest lm-sensors source.
This is the result:
'sudo sensors'
------------------------------------------------------------------
w83627ehf-isa-0290
Adapter: ISA adapter
VCore: +1.14 V (min = +0.00 V, max = +1.74 V)
in1: +12.36 V (min = +8.29 V, max = +12.62 V)
AVCC: +3.18 V (min = +3.60 V, max = +4.08 V) ALARM
3VCC: +3.18 V (min = +1.01 V, max = +4.08 V)
in4: +1.63 V (min = +1.66 V, max = +2.01 V) ALARM
in5: +1.73 V (min = +0.31 V, max = +1.77 V)
in6: +5.63 V (min = +5.50 V, max = +0.64 V) ALARM
VSB: +3.18 V (min = +4.05 V, max = +3.60 V) ALARM
VBAT: +2.03 V (min = +1.17 V, max = +1.52 V) ALARM
in9: +1.62 V (min = +0.42 V, max = +1.53 V) ALARM
Case Fan: 0 RPM (min = 42 RPM, div = 128) ALARM
CPU Fan: 2700 RPM (min = 3750 RPM, div = 2) ALARM
Aux Fan: 0 RPM (min = 48 RPM, div = 128) ALARM
fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM
Sys Temp: +38.0°C (high = +93.0°C, hyst = -88.0°C)
CPU Temp: +28.5°C (high = +80.0°C, hyst = +75.0°C)
AUX Temp: +35.0°C (high = +80.0°C, hyst = +75.0°C)
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +33.0°C
--------------------------------------------------------------
'sudo pwmconfig'
--------------------------------------------------------------
Found the following devices:
hwmon0/device is k8temp
hwmon1/device is w83627ehf
Found the following PWM controls:
hwmon1/device/pwm1
hwmon1/device/pwm1 stuck to 0
Manual control mode not supported, skipping hwmon1/device/pwm1.
hwmon1/device/pwm2
hwmon1/device/pwm2 stuck to 0
Manual control mode not supported, skipping hwmon1/device/pwm2.
hwmon1/device/pwm3
hwmon1/device/pwm3 stuck to 0
Manual control mode not supported, skipping hwmon1/device/pwm3.
There are no usable PWM outputs.
--------------------------------------------------------------
Speedstepping works without I probelm (when Cool and Quiet support is activated in the bios)
I've installed the newest bios, but it didn't help me.
And my bios it self does not give the the possibility to control my CPU-fan speed
(There is nothing like Q-fan).
So what am I doing wrong?
Thanks for your help,
Martin W.
'sudo lsmod':
-----------------------------------------------------------------------------------
Module Size Used by
ipv6 317192 8
af_packet 28172 2
rfcomm 47656 2
l2cap 28672 11 rfcomm
bluetooth 63876 4 rfcomm,l2cap
ppdev 11272 0
ac 7304 0
container 6400 0
dock 12264 0
video 21140 0
button 10400 0
sbs 21520 0
battery 12424 0
powernow_k8 16608 0
cpufreq_ondemand 10896 1
cpufreq_userspace 6048 0
cpufreq_powersave 3072 0
cpufreq_conservative 9608 0
cpufreq_stats 8160 0
freq_table 6464 3 powernow_k8,cpufreq_ondemand,cpufreq_stats
w83627ehf 24464 0
i2c_isa 6400 1 w83627ehf
sbp2 27144 0
lp 15048 0
tda827x 9348 1
saa7134_alsa 17440 0
saa7134_dvb 21004 0
dvb_pll 18436 1 saa7134_dvb
video_buf_dvb 8708 1 saa7134_dvb
dvb_core 94768 1 video_buf_dvb
tda1004x 18692 2 saa7134_dvb
tuner 70184 0
snd_via82xx 33192 1
gameport 18704 1 snd_via82xx
snd_mpu401_uart 11008 1 snd_via82xx
snd_seq_dummy 5380 0
snd_seq_oss 36864 0
snd_seq_midi 11008 0
snd_rawmidi 29824 2 snd_mpu401_uart,snd_seq_midi
usbhid 32576 0
nvidia 7013492 34
hid 33408 1 usbhid
saa7134 148308 2 saa7134_alsa,saa7134_dvb
snd_via82xx_modem 18444 0
snd_ac97_codec 122200 2 snd_via82xx,snd_via82xx_modem
video_buf 30084 4 saa7134_alsa,saa7134_dvb,video_buf_dvb,saa7134
compat_ioctl32 11136 1 saa7134
snd_seq_midi_event 9984 2 snd_seq_oss,snd_seq_midi
parport_pc 41896 1
pcmcia 46232 0
ac97_bus 4096 1 snd_ac97_codec
snd_pcm_oss 50048 0
snd_mixer_oss 20096 1 snd_pcm_oss
ir_kbd_i2c 11536 1 saa7134
snd_seq 62496 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_seq_device 10260 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
psmouse 45596 0
parport 44172 3 ppdev,lp,parport_pc
snd_pcm 94344 5 saa7134_alsa,snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss
snd_timer 27272 2 snd_seq,snd_pcm
ir_common 38916 2 saa7134,ir_kbd_i2c
i2c_viapro 11544 0
pcspkr 4608 0
serio_raw 9092 0
videodev 31360 1 saa7134
v4l2_common 21888 4 tuner,saa7134,compat_ioctl32,videodev
v4l1_compat 15364 2 saa7134,videodev
k8temp 7680 0
snd_page_alloc 12560 3 snd_via82xx,snd_via82xx_modem,snd_pcm
snd 69288 15 saa7134_alsa,snd_via82xx,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_pcm,snd_timer
soundcore 10272 1 snd
shpchp 38300 0
i2c_core 30208 11 w83627ehf,i2c_isa,tda827x,saa7134_dvb,dvb_pll,tda1004x,tuner,nvidia,saa7134,ir_kbd_i2c,i2c_viapro
yenta_socket 30220 1
rsrc_nonstatic 14208 1 yenta_socket
pcmcia_core 46628 3 pcmcia,yenta_socket,rsrc_nonstatic
pci_hotplug 36612 1 shpchp
evdev 13056 4
ext3 146576 7
jbd 69360 1 ext3
mbcache 11272 1 ext3
ide_cd 35488 0
cdrom 41768 1 ide_cd
ide_disk 20352 9
ata_generic 9988 0
floppy 69608 0
ehci_hcd 40076 0
via_rhine 28936 0
mii 7424 1 via_rhine
uhci_hcd 29600 0
usbcore 161584 4 usbhid,ehci_hcd,uhci_hcd
sata_via 14596 0
libata 138928 2 ata_generic,sata_via
scsi_mod 172856 2 sbp2,libata
via82cxxx 11268 0 [permanent]
ide_core 141200 3 ide_cd,ide_disk,via82cxxx
ohci1394 38984 0
ieee1394 109528 2 sbp2,ohci1394
thermal 16528 0
processor 36232 2 powernow_k8,thermal
fan 6920 0
fuse 52528 1
apparmor 47008 0
commoncap 9472 1 apparmor
-----------------------------------------------------------------------------------
'sudo lspci':
-----------------------------------------------------------------------------------
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
00:0c.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
00:0d.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5500] (rev a1)
-----------------------------------------------------------------------------------
_______________________________________________________________________
Jetzt neu! Schützen Sie Ihren PC mit McAfee und WEB.DE. 30 Tage
kostenlos testen. http://www.pc-sicherheit.web.de/startseite/?mc\x022220
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [lm-sensors] Need Help, Ubutnu 7.1, Asus K8V-MX, AMD 3000+,
2008-02-26 19:43 [lm-sensors] Need Help, Ubutnu 7.1, Asus K8V-MX, AMD 3000+, Martin Wegener
2008-02-28 19:48 ` Martin Wegener
@ 2008-03-01 0:17 ` Matt Roberds
1 sibling, 0 replies; 3+ messages in thread
From: Matt Roberds @ 2008-03-01 0:17 UTC (permalink / raw)
To: lm-sensors
On Thu, 28 Feb 2008, Martin Wegener wrote:
> Speedstepping works without I probelm (when Cool and Quiet support
> is activated in the bios) I've installed the newest bios, but it
> didn't help me. And my bios it self does not give the the
> possibility to control my CPU-fan speed (There is nothing like Q-fan).
Have you tried disabling or at least changing the speed and fan related
settings (like Cool and Quiet) in the BIOS to see if that affects
anything? I am not sure how common this is, but maybe the BIOS and
lmsensors are fighting for control of the hardware.
Matt Roberds
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-03-01 0:17 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-02-26 19:43 [lm-sensors] Need Help, Ubutnu 7.1, Asus K8V-MX, AMD 3000+, Martin Wegener
2008-02-28 19:48 ` Martin Wegener
2008-03-01 0:17 ` Matt Roberds
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.