* [Ocfs2-devel] Commenting patch for 1st time mount stuff
@ 2004-04-21 19:18 John L. Villalovos
0 siblings, 0 replies; only message in thread
From: John L. Villalovos @ 2004-04-21 19:18 UTC (permalink / raw)
To: ocfs2-devel
Redoing commenting patch with /* */ comments
Index: super.c
===================================================================
--- super.c (revision 860)
+++ super.c (working copy)
@@ -961,6 +961,8 @@
osb->publ_map |= (1 << osb->node_num);
osb->vol_state = VOLUME_INIT;
+ /* Check if first time this partition has been mounted. If so create
+ the root Oracle INode. */
status = ocfs_create_root_oin (osb, NULL);
if (status >= 0)
osb->vol_state = VOLUME_ENABLED;
Index: oin.c
===================================================================
--- oin.c (revision 860)
+++ oin.c (working copy)
@@ -446,6 +446,11 @@
/* ocfs_create_root_oin()
*
+ * This function will create the root Oracle INode (OIN) on the file system if
+ * this is the first time that this partition has ever been mounted.
+ *
+ * If this is NOT the first time this partition has been mounted (meaning it
+ * has been mounted before) then this function does nothing.
*/
int ocfs_create_root_oin (ocfs_super * osb, struct inode *root)
{
@@ -459,7 +464,15 @@
LOG_ENTRY ();
+ /* Is this the first time this partition has been mounted? */
if (osb->vol_layout.root_start_off == 0) {
+ /* This is our first time being mounted. We need to take care
+ * of setting up the root Oracle inode. In order to do this we
+ * are going to call ocfs_create_root_dir_node. So we need to
+ * get the disk offset to the root directory (root_dirnode).
+ * In order to get that we need to read in the volume header
+ * from the first sector of the disk. */
+
status = ocfs_wait_for_disk_lock_release (osb, OCFS_VOLUME_LOCK_OFFSET,
10000, OCFS_DLM_NO_LOCK);
if (status < 0) {
@@ -471,12 +484,14 @@
OCFS_DLM_EXCLUSIVE_LOCK, FLAG_FILE_CREATE,
&lockres, &bh, NULL);
if (status >= 0) {
+ /* Read the volume header from the first sector of the
+ * partition and put it into our buffer head */
status = ocfs_read_bh(osb, 0, &hdr_bh, 0, NULL);
if (status < 0)
LOG_ERROR_STATUS (status);
tmpstat = ocfs_release_lock (osb, OCFS_VOLUME_LOCK_OFFSET, OCFS_DLM_EXCLUSIVE_LOCK, 0, lockres, bh, NULL);
-
+
if (bh)
brelse(bh);
@@ -492,7 +507,13 @@
LOG_ERROR_STATUS (status);
goto finally;
}
-
+
+ /* Get the volume header data from our buffer head. We need to
+ * know the following in order to call
+ * ocfs_create_root_dir_node():
+ * * root_off: disk offset to the ocfs root dirnode
+ * (root_directory)
+ * * internal_off: disk offset to the data segment */
volDiskHdr = (ocfs_vol_disk_hdr *) OCFS_BH_GET_DATA_READ(hdr_bh); /* read */
root_off = volDiskHdr->root_off;
int_off = volDiskHdr->internal_off;
@@ -502,10 +523,13 @@
ocfs_wait_for_disk_lock_release (osb,
OCFS_VOLUME_LOCK_OFFSET,
30000, OCFS_DLM_NO_LOCK);
+ /* Setup the root_start_off with the correct value so
+ * that it will not run this function the next time the
+ * filesystem is mounted. */
osb->vol_layout.root_start_off = root_off;
osb->vol_layout.root_int_off = int_off;
}
-
+ /* Do all the work in creating our root directory */
status = ocfs_create_root_dir_node (osb);
if (status < 0) {
LOG_ERROR_STATUS (status);
-------------- next part --------------
Index: super.c
===================================================================
--- super.c (revision 860)
+++ super.c (working copy)
@@ -961,6 +961,8 @@
osb->publ_map |= (1 << osb->node_num);
osb->vol_state = VOLUME_INIT;
+ /* Check if first time this partition has been mounted. If so create
+ the root Oracle INode. */
status = ocfs_create_root_oin (osb, NULL);
if (status >= 0)
osb->vol_state = VOLUME_ENABLED;
Index: oin.c
===================================================================
--- oin.c (revision 860)
+++ oin.c (working copy)
@@ -446,6 +446,11 @@
/* ocfs_create_root_oin()
*
+ * This function will create the root Oracle INode (OIN) on the file system if
+ * this is the first time that this partition has ever been mounted.
+ *
+ * If this is NOT the first time this partition has been mounted (meaning it
+ * has been mounted before) then this function does nothing.
*/
int ocfs_create_root_oin (ocfs_super * osb, struct inode *root)
{
@@ -459,7 +464,15 @@
LOG_ENTRY ();
+ /* Is this the first time this partition has been mounted? */
if (osb->vol_layout.root_start_off == 0) {
+ /* This is our first time being mounted. We need to take care
+ * of setting up the root Oracle inode. In order to do this we
+ * are going to call ocfs_create_root_dir_node. So we need to
+ * get the disk offset to the root directory (root_dirnode).
+ * In order to get that we need to read in the volume header
+ * from the first sector of the disk. */
+
status = ocfs_wait_for_disk_lock_release (osb, OCFS_VOLUME_LOCK_OFFSET,
10000, OCFS_DLM_NO_LOCK);
if (status < 0) {
@@ -471,12 +484,14 @@
OCFS_DLM_EXCLUSIVE_LOCK, FLAG_FILE_CREATE,
&lockres, &bh, NULL);
if (status >= 0) {
+ /* Read the volume header from the first sector of the
+ * partition and put it into our buffer head */
status = ocfs_read_bh(osb, 0, &hdr_bh, 0, NULL);
if (status < 0)
LOG_ERROR_STATUS (status);
tmpstat = ocfs_release_lock (osb, OCFS_VOLUME_LOCK_OFFSET, OCFS_DLM_EXCLUSIVE_LOCK, 0, lockres, bh, NULL);
-
+
if (bh)
brelse(bh);
@@ -492,7 +507,13 @@
LOG_ERROR_STATUS (status);
goto finally;
}
-
+
+ /* Get the volume header data from our buffer head. We need to
+ * know the following in order to call
+ * ocfs_create_root_dir_node():
+ * * root_off: disk offset to the ocfs root dirnode
+ * (root_directory)
+ * * internal_off: disk offset to the data segment */
volDiskHdr = (ocfs_vol_disk_hdr *) OCFS_BH_GET_DATA_READ(hdr_bh); /* read */
root_off = volDiskHdr->root_off;
int_off = volDiskHdr->internal_off;
@@ -502,10 +523,13 @@
ocfs_wait_for_disk_lock_release (osb,
OCFS_VOLUME_LOCK_OFFSET,
30000, OCFS_DLM_NO_LOCK);
+ /* Setup the root_start_off with the correct value so
+ * that it will not run this function the next time the
+ * filesystem is mounted. */
osb->vol_layout.root_start_off = root_off;
osb->vol_layout.root_int_off = int_off;
}
-
+ /* Do all the work in creating our root directory */
status = ocfs_create_root_dir_node (osb);
if (status < 0) {
LOG_ERROR_STATUS (status);
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-04-21 19:18 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-04-21 19:18 [Ocfs2-devel] Commenting patch for 1st time mount stuff John L. Villalovos
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.