* i2o_block-cleanup.patch for 2.6.6 with request for review
@ 2004-04-22 14:56 Markus Lidel
0 siblings, 0 replies; only message in thread
From: Markus Lidel @ 2004-04-22 14:56 UTC (permalink / raw)
To: axboe, SCSI Mailing List
[-- Attachment #1: Type: text/plain, Size: 1244 bytes --]
Hello,
Okay, after some time, i now have a new i2o_block patch, which solves
several bugs:
- I2O_LOCK was often called with c->unit, which addresses the
controller, and not the device (dev->index). This wasn't discovered
yet, because each device uses the same queue on the same controller,
and there was only one controller.
- the cleanup function for gendisk (del_gendisk) has a bug, if the
queue is shared between different devices. To workaround the queue is
removed before. Is this okay, because blk_unregister_queue will not be
executed.
- redundant code removed in module initialization and remove, use
i2ob_new_device and i2ob_del_device instead.
- added all changes from Jens Axboe (also removed the atomic, which
is not needed, because the spinlock is already held, i think).
The patch is as always also available at
http://i2o.shadowconnect.com/i2o_block-cleanup.patch
Thank you for your help...
Best regards,
Markus Lidel
------------------------------------------
Markus Lidel (Senior IT Consultant)
Shadow Connect GmbH
Carl-Reisch-Weg 12
D-86381 Krumbach
Germany
Phone: +49 82 82/99 51-0
Fax: +49 82 82/99 51-11
E-Mail: Markus.Lidel@shadowconnect.com
URL: http://www.shadowconnect.com
[-- Attachment #2: i2o_block-cleanup.patch --]
[-- Type: text/plain, Size: 20554 bytes --]
--- a/drivers/message/i2o/i2o_block.c 2004-04-03 17:37:37.000000000 -1000
+++ b/drivers/message/i2o/i2o_block.c 2004-04-23 02:13:24.132931000 -1000
@@ -83,7 +83,6 @@
#include <asm/semaphore.h>
#include <linux/completion.h>
#include <asm/io.h>
-#include <asm/atomic.h>
#include <linux/smp_lock.h>
#include <linux/wait.h>
@@ -111,16 +110,12 @@
I2O_EVT_IND_BSA_SCSI_SMART )
-#define I2O_LOCK(unit) (i2ob_dev[(unit)].req_queue->queue_lock)
-
/*
* Some of these can be made smaller later
*/
-static int i2ob_media_change_flag[MAX_I2OB];
-static u32 i2ob_max_sectors[MAX_I2OB<<4];
-
static int i2ob_context;
+static struct block_device_operations i2ob_fops;
/*
* I2O Block device descriptor
@@ -143,6 +138,9 @@
int wcache;
int power;
int index;
+ int media_change_flag;
+ u32 max_sectors;
+ struct gendisk *gd;
};
/*
@@ -162,16 +160,16 @@
};
/*
- * Per IOP requst queue information
+ * Per IOP request queue information
*
- * We have a separate requeust_queue_t per IOP so that a heavilly
+ * We have a separate request_queue_t per IOP so that a heavilly
* loaded I2O block device on an IOP does not starve block devices
* across all I2O controllers.
*
*/
struct i2ob_iop_queue
{
- atomic_t queue_depth;
+ unsigned int queue_depth;
struct i2ob_request request_queue[MAX_I2OB_DEPTH];
struct i2ob_request *i2ob_qhead;
request_queue_t *req_queue;
@@ -183,9 +181,8 @@
* Each I2O disk is one of these.
*/
-static struct i2ob_device i2ob_dev[MAX_I2OB<<4];
+static struct i2ob_device i2ob_dev[MAX_I2OB];
static int i2ob_dev_count = 0;
-static struct gendisk *i2ob_disk[MAX_I2OB];
/*
* Mutex and spin lock for event handling synchronization
@@ -312,7 +309,6 @@
/*
* Mask out partitions from now on
*/
- unit &= 0xF0;
/* This can be optimised later - just want to be sure its right for
starters */
@@ -402,7 +398,7 @@
}
i2o_post_message(c,m);
- atomic_inc(&i2ob_queues[c->unit]->queue_depth);
+ i2ob_queues[c->unit]->queue_depth ++;
return 0;
}
@@ -453,8 +449,8 @@
struct i2ob_request *ireq = NULL;
u8 st;
u32 *m = (u32 *)msg;
- u8 unit = (m[2]>>8)&0xF0; /* low 4 bits are partition */
- struct i2ob_device *dev = &i2ob_dev[(unit&0xF0)];
+ u8 unit = m[2]>>8;
+ struct i2ob_device *dev = &i2ob_dev[unit];
/*
* FAILed message
@@ -475,10 +471,10 @@
ireq=&i2ob_queues[c->unit]->request_queue[m[3]];
ireq->req->errors++;
- spin_lock_irqsave(I2O_LOCK(c->unit), flags);
+ spin_lock_irqsave(dev->req_queue->queue_lock, flags);
i2ob_unhook_request(ireq, c->unit);
i2ob_end_request(ireq->req);
- spin_unlock_irqrestore(I2O_LOCK(c->unit), flags);
+ spin_unlock_irqrestore(dev->req_queue->queue_lock, flags);
/* Now flush the message by making it a NOP */
m[0]&=0x00FFFFFF;
@@ -509,10 +505,10 @@
ireq=&i2ob_queues[c->unit]->request_queue[m[3]];
ireq->req->errors++;
printk(KERN_WARNING "I2O Block: Data transfer to deleted device!\n");
- spin_lock_irqsave(I2O_LOCK(c->unit), flags);
+ spin_lock_irqsave(dev->req_queue->queue_lock, flags);
i2ob_unhook_request(ireq, c->unit);
i2ob_end_request(ireq->req);
- spin_unlock_irqrestore(I2O_LOCK(c->unit), flags);
+ spin_unlock_irqrestore(dev->req_queue->queue_lock, flags);
return;
}
@@ -576,17 +572,17 @@
*/
i2ob_free_sglist(dev, ireq);
- spin_lock_irqsave(I2O_LOCK(c->unit), flags);
+ spin_lock_irqsave(dev->req_queue->queue_lock, flags);
i2ob_unhook_request(ireq, c->unit);
i2ob_end_request(ireq->req);
- atomic_dec(&i2ob_queues[c->unit]->queue_depth);
+ i2ob_queues[c->unit]->queue_depth --;
/*
* We may be able to do more I/O
*/
- i2ob_request(dev->req_queue);
- spin_unlock_irqrestore(I2O_LOCK(c->unit), flags);
+ i2ob_request(dev->gd->queue);
+ spin_unlock_irqrestore(dev->req_queue->queue_lock, flags);
}
/*
@@ -598,8 +594,8 @@
{
unsigned int evt;
unsigned long flags;
+ struct i2ob_device *dev;
int unit;
- int i;
//The only event that has data is the SCSI_SMART event.
struct i2o_reply {
u32 header[4];
@@ -638,6 +634,7 @@
unit = le32_to_cpu(evt_local->header[3]);
evt = le32_to_cpu(evt_local->evt_indicator);
+ dev = &i2ob_dev[unit];
switch(evt)
{
/*
@@ -648,10 +645,9 @@
*/
case I2O_EVT_IND_BSA_VOLUME_LOAD:
{
- struct gendisk *p = i2ob_disk[unit>>4];
- i2ob_install_device(i2ob_dev[unit].i2odev->controller,
- i2ob_dev[unit].i2odev, unit);
- add_disk(p);
+ i2ob_install_device(dev->i2odev->controller,
+ dev->i2odev, unit);
+ add_disk(dev->gd);
break;
}
@@ -663,17 +659,18 @@
*/
case I2O_EVT_IND_BSA_VOLUME_UNLOAD:
{
- struct gendisk *p = i2ob_disk[unit>>4];
+ struct gendisk *p = dev->gd;
+ blk_queue_max_sectors(dev->gd->queue, 0);
del_gendisk(p);
- for(i = unit; i <= unit+15; i++)
- blk_queue_max_sectors(i2ob_dev[i].req_queue, 0);
- i2ob_media_change_flag[unit] = 1;
+ put_disk(p);
+ dev->gd = NULL;
+ dev->media_change_flag = 1;
break;
}
case I2O_EVT_IND_BSA_VOLUME_UNLOAD_REQ:
printk(KERN_WARNING "%s: Attempt to eject locked media\n",
- i2ob_dev[unit].i2odev->dev_name);
+ dev->i2odev->dev_name);
break;
/*
@@ -691,12 +688,12 @@
{
u64 size;
- if(i2ob_query_device(&i2ob_dev[unit], 0x0004, 0, &size, 8) !=0 )
- i2ob_query_device(&i2ob_dev[unit], 0x0000, 4, &size, 8);
+ if(i2ob_query_device(dev, 0x0004, 0, &size, 8) !=0 )
+ i2ob_query_device(dev, 0x0000, 4, &size, 8);
- spin_lock_irqsave(I2O_LOCK(unit), flags);
- set_capacity(i2ob_disk[unit>>4], size>>9);
- spin_unlock_irqrestore(I2O_LOCK(unit), flags);
+ spin_lock_irqsave(dev->req_queue->queue_lock, flags);
+ set_capacity(dev->gd, size>>9);
+ spin_unlock_irqrestore(dev->req_queue->queue_lock, flags);
break;
}
@@ -708,7 +705,7 @@
case I2O_EVT_IND_BSA_SCSI_SMART:
{
char buf[16];
- printk(KERN_INFO "I2O Block: %s received a SCSI SMART Event\n",i2ob_dev[unit].i2odev->dev_name);
+ printk(KERN_INFO "I2O Block: %s received a SCSI SMART Event\n",dev->i2odev->dev_name);
evt_local->data[16]='\0';
sprintf(buf,"%s",&evt_local->data[0]);
printk(KERN_INFO " Disk Serial#:%s\n",buf);
@@ -735,12 +732,12 @@
* hit the fan big time. The card seems to recover but loses
* the pending writes. Deeply ungood except for testing fsck
*/
- if(i2ob_dev[unit].i2odev->controller->promise)
+ if(dev->i2odev->controller->promise)
panic("I2O controller firmware failed. Reboot and force a filesystem check.\n");
default:
printk(KERN_INFO "%s: Received event 0x%X we didn't register for\n"
KERN_INFO " Blame the I2O card manufacturer 8)\n",
- i2ob_dev[unit].i2odev->dev_name, evt);
+ dev->i2odev->dev_name, evt);
break;
}
};
@@ -765,14 +762,6 @@
u32 m;
while ((req = elv_next_request(q)) != NULL) {
- /*
- * On an IRQ completion if there is an inactive
- * request on the queue head it means it isnt yet
- * ready to dispatch.
- */
- if(req->rq_status == RQ_INACTIVE)
- return;
-
dev = req->rq_disk->private_data;
/*
@@ -780,7 +769,7 @@
* generic IOP commit control. Certainly it's not right
* its global!
*/
- if(atomic_read(&i2ob_queues[dev->unit]->queue_depth) >= dev->depth)
+ if(i2ob_queues[dev->unit]->queue_depth >= dev->depth)
break;
/* Get a message */
@@ -788,7 +777,7 @@
if(m==0xFFFFFFFF)
{
- if(atomic_read(&i2ob_queues[dev->unit]->queue_depth) == 0)
+ if(i2ob_queues[dev->unit]->queue_depth == 0)
printk(KERN_ERR "i2o_block: message queue and request queue empty!!\n");
break;
}
@@ -797,13 +786,12 @@
*/
req->errors = 0;
blkdev_dequeue_request(req);
- req->waiting = NULL;
ireq = i2ob_queues[dev->unit]->i2ob_qhead;
i2ob_queues[dev->unit]->i2ob_qhead = ireq->next;
ireq->req = req;
- i2ob_send(m, dev, ireq, (dev->unit&0xF0));
+ i2ob_send(m, dev, ireq, dev->index);
}
}
@@ -1065,7 +1053,10 @@
u16 power;
u32 flags, status;
struct i2ob_device *dev=&i2ob_dev[unit];
- int i;
+ struct gendisk *disk;
+ request_queue_t *q;
+ int segments;
+
/*
* For logging purposes...
@@ -1079,21 +1070,35 @@
* before any I/O can be performed. If it fails, this
* device is useless.
*/
- if(!i2ob_queues[unit]) {
- if(i2ob_init_iop(unit))
+ if(!i2ob_queues[c->unit]) {
+ if(i2ob_init_iop(c->unit))
return 1;
}
+ q = i2ob_queues[c->unit]->req_queue;
+
/*
* This will save one level of lookup/indirection in critical
* code so that we can directly get the queue ptr from the
* device instead of having to go the IOP data structure.
*/
- dev->req_queue = i2ob_queues[unit]->req_queue;
+ dev->req_queue = q;
+ /*
+ * Allocate a gendisk structure and initialize it
+ */
+ disk = alloc_disk(16);
+ if (!disk)
+ return 1;
+
+ dev->gd = disk;
/* initialize gendik structure */
- i2ob_disk[unit>>4]->private_data = dev;
- i2ob_disk[unit>>4]->queue = dev->req_queue;
+ disk->major = MAJOR_NR;
+ disk->first_minor = unit<<4;
+ disk->queue = q;
+ disk->fops = &i2ob_fops;
+ sprintf(disk->disk_name, "i2o/hd%c", 'a' + unit);
+ disk->private_data = dev;
/*
* Ask for the current media data. If that isn't supported
@@ -1110,53 +1115,49 @@
power = 0;
i2ob_query_device(dev, 0x0000, 5, &flags, 4);
i2ob_query_device(dev, 0x0000, 6, &status, 4);
- set_capacity(i2ob_disk[unit>>4], size>>9);
+ set_capacity(disk, size>>9);
/*
* Max number of Scatter-Gather Elements
*/
- i2ob_dev[unit].power = power; /* Save power state in device proper */
- i2ob_dev[unit].flags = flags;
+ dev->power = power; /* Save power state in device proper */
+ dev->flags = flags;
- for(i=unit;i<=unit+15;i++)
- {
- request_queue_t *q = i2ob_dev[unit].req_queue;
- int segments = (d->controller->status_block->inbound_frame_size - 7) / 2;
+ segments = (d->controller->status_block->inbound_frame_size - 7) / 2;
- if(segments > 16)
- segments = 16;
-
- i2ob_dev[i].power = power; /* Save power state */
- i2ob_dev[unit].flags = flags; /* Keep the type info */
+ if(segments > 16)
+ segments = 16;
+
+ dev->power = power; /* Save power state */
+ dev->flags = flags; /* Keep the type info */
- blk_queue_max_sectors(q, 96); /* 256 might be nicer but many controllers
+ blk_queue_max_sectors(q, 96); /* 256 might be nicer but many controllers
explode on 65536 or higher */
- blk_queue_max_phys_segments(q, segments);
- blk_queue_max_hw_segments(q, segments);
+ blk_queue_max_phys_segments(q, segments);
+ blk_queue_max_hw_segments(q, segments);
- i2ob_dev[i].rcache = CACHE_SMARTFETCH;
- i2ob_dev[i].wcache = CACHE_WRITETHROUGH;
+ dev->rcache = CACHE_SMARTFETCH;
+ dev->wcache = CACHE_WRITETHROUGH;
- if(d->controller->battery == 0)
- i2ob_dev[i].wcache = CACHE_WRITETHROUGH;
+ if(d->controller->battery == 0)
+ dev->wcache = CACHE_WRITETHROUGH;
- if(d->controller->promise)
- i2ob_dev[i].wcache = CACHE_WRITETHROUGH;
+ if(d->controller->promise)
+ dev->wcache = CACHE_WRITETHROUGH;
- if(d->controller->short_req)
- {
- blk_queue_max_sectors(q, 8);
- blk_queue_max_phys_segments(q, 8);
- blk_queue_max_hw_segments(q, 8);
- }
+ if(d->controller->short_req)
+ {
+ blk_queue_max_sectors(q, 8);
+ blk_queue_max_phys_segments(q, 8);
+ blk_queue_max_hw_segments(q, 8);
}
- strcpy(d->dev_name, i2ob_disk[unit>>4]->disk_name);
- strcpy(i2ob_disk[unit>>4]->devfs_name, i2ob_disk[unit>>4]->disk_name);
+ strcpy(d->dev_name, disk->disk_name);
+ strcpy(disk->devfs_name, disk->disk_name);
printk(KERN_INFO "%s: Max segments %d, queue depth %d, byte limit %d.\n",
- d->dev_name, i2ob_dev[unit].max_segments, i2ob_dev[unit].depth, i2ob_max_sectors[unit]<<9);
+ d->dev_name, dev->max_segments, dev->depth, dev->max_sectors<<9);
i2ob_query_device(dev, 0x0000, 0, &type, 1);
@@ -1197,7 +1198,7 @@
}
printk(".\n");
printk(KERN_INFO "%s: Maximum sectors/read set to %d.\n",
- d->dev_name, i2ob_max_sectors[unit]);
+ d->dev_name, dev->max_sectors);
/*
* Register for the events we're interested in and that the
@@ -1233,7 +1234,7 @@
/* Queue is MAX_I2OB + 1... */
i2ob_queues[unit]->request_queue[i].next = NULL;
i2ob_queues[unit]->i2ob_qhead = &i2ob_queues[unit]->request_queue[0];
- atomic_set(&i2ob_queues[unit]->queue_depth, 0);
+ i2ob_queues[unit]->queue_depth = 0;
i2ob_queues[unit]->lock = SPIN_LOCK_UNLOCKED;
i2ob_queues[unit]->req_queue = blk_init_queue(i2ob_request, &i2ob_queues[unit]->lock);
@@ -1257,7 +1258,6 @@
struct i2o_device *d, *b=NULL;
struct i2o_controller *c;
- struct i2ob_device *dev;
for(i=0; i< MAX_I2O_CONTROLLERS; i++)
{
@@ -1313,44 +1313,12 @@
continue; /*Already claimed on pass 1 */
}
- if(i2o_claim_device(d, &i2o_block_handler))
- {
- printk(KERN_WARNING "i2o_block: Controller %d, TID %d\n", c->unit,
- d->lct_data.tid);
- printk(KERN_WARNING "\t%sevice refused claim! Skipping installation\n", bios?"Boot d":"D");
- continue;
- }
-
- i2o_release_device(d, &i2o_block_handler);
-
- if(scan_unit<MAX_I2OB<<4)
- {
- /*
- * Get the device and fill in the
- * Tid and controller.
- */
- dev=&i2ob_dev[scan_unit];
- dev->i2odev = d;
- dev->controller = c;
- dev->unit = c->unit;
- dev->tid = d->lct_data.tid;
-
- if(i2ob_install_device(c,d,scan_unit))
- printk(KERN_WARNING "Could not install I2O block device\n");
- else
- {
- add_disk(i2ob_disk[scan_unit>>4]);
- scan_unit+=16;
- i2ob_dev_count++;
-
- /* We want to know when device goes away */
- i2o_device_notify_on(d, &i2o_block_handler);
- }
- }
+ if(scan_unit<MAX_I2OB)
+ i2ob_new_device(c, d);
else
{
if(!warned++)
- printk(KERN_WARNING "i2o_block: too many device, registering only %d.\n", scan_unit>>4);
+ printk(KERN_WARNING "i2o_block: too many device, registering only %d.\n", scan_unit);
}
}
i2o_unlock_controller(c);
@@ -1399,12 +1367,12 @@
printk(KERN_INFO " Controller %d Tid %d\n",c->unit, d->lct_data.tid);
/* Check for available space */
- if(i2ob_dev_count>=MAX_I2OB<<4)
+ if(i2ob_dev_count>=MAX_I2OB)
{
printk(KERN_ERR "i2o_block: No more devices allowed!\n");
return;
}
- for(unit = 0; unit < (MAX_I2OB<<4); unit += 16)
+ for(unit = 0; unit < MAX_I2OB; unit ++)
{
if(!i2ob_dev[unit].i2odev)
break;
@@ -1420,18 +1388,20 @@
dev->i2odev = d;
dev->controller = c;
dev->tid = d->lct_data.tid;
+ dev->unit = c->unit;
- if(i2ob_install_device(c,d,unit))
+ if(i2ob_install_device(c,d,unit)) {
+ i2o_release_device(d, &i2o_block_handler);
printk(KERN_ERR "i2o_block: Could not install new device\n");
+ }
else
{
- add_disk(i2ob_disk[unit>>4]);
+ i2o_release_device(d, &i2o_block_handler);
+ add_disk(dev->gd);
i2ob_dev_count++;
i2o_device_notify_on(d, &i2o_block_handler);
}
- i2o_release_device(d, &i2o_block_handler);
-
return;
}
@@ -1443,64 +1413,58 @@
void i2ob_del_device(struct i2o_controller *c, struct i2o_device *d)
{
int unit = 0;
- int i = 0;
unsigned long flags;
+ struct i2ob_device *dev;
- spin_lock_irqsave(I2O_LOCK(c->unit), flags);
-
- /*
- * Need to do this...we somtimes get two events from the IRTOS
- * in a row and that causes lots of problems.
- */
- i2o_device_notify_off(d, &i2o_block_handler);
-
- printk(KERN_INFO "I2O Block Device Deleted\n");
-
- for(unit = 0; unit < MAX_I2OB<<4; unit += 16)
+ for(unit = 0; unit < MAX_I2OB; unit ++)
{
- if(i2ob_dev[unit].i2odev == d)
+ dev = &i2ob_dev[unit];
+ if(dev->i2odev == d)
{
printk(KERN_INFO " /dev/%s: Controller %d Tid %d\n",
d->dev_name, c->unit, d->lct_data.tid);
break;
}
}
- if(unit >= MAX_I2OB<<4)
+
+ printk(KERN_INFO "I2O Block Device Deleted\n");
+
+ if(unit >= MAX_I2OB)
{
printk(KERN_ERR "i2ob_del_device called, but not in dev table!\n");
- spin_unlock_irqrestore(I2O_LOCK(c->unit), flags);
return;
}
+ spin_lock_irqsave(dev->req_queue->queue_lock, flags);
+
+ /*
+ * Need to do this...we somtimes get two events from the IRTOS
+ * in a row and that causes lots of problems.
+ */
+ i2o_device_notify_off(d, &i2o_block_handler);
+
/*
* This will force errors when i2ob_get_queue() is called
* by the kenrel.
*/
- del_gendisk(i2ob_disk[unit>>4]);
- i2ob_dev[unit].req_queue = NULL;
- for(i = unit; i <= unit+15; i++)
- {
- i2ob_dev[i].i2odev = NULL;
- blk_queue_max_sectors(i2ob_dev[i].req_queue, 0);
- }
- spin_unlock_irqrestore(I2O_LOCK(c->unit), flags);
-
- /*
- * Decrease usage count for module
- */
-
- while(i2ob_dev[unit].refcnt--)
- MOD_DEC_USE_COUNT;
-
- i2ob_dev[unit].refcnt = 0;
-
- i2ob_dev[i].tid = 0;
+ if(dev->gd) {
+ struct gendisk *gd = dev->gd;
+ gd->queue = NULL;
+ del_gendisk(gd);
+ put_disk(gd);
+ dev->gd = NULL;
+ }
+ spin_unlock_irqrestore(dev->req_queue->queue_lock, flags);
+ dev->req_queue = NULL;
+ dev->i2odev = NULL;
+ dev->refcnt = 0;
+ dev->tid = 0;
/*
* Do we need this?
* The media didn't really change...the device is just gone
*/
- i2ob_media_change_flag[unit] = 1;
+ dev->media_change_flag = 1;
i2ob_dev_count--;
}
@@ -1511,10 +1475,9 @@
static int i2ob_media_change(struct gendisk *disk)
{
struct i2ob_device *p = disk->private_data;
- int i = p->index;
- if(i2ob_media_change_flag[i])
+ if(p->media_change_flag)
{
- i2ob_media_change_flag[i]=0;
+ p->media_change_flag=0;
return 1;
}
return 0;
@@ -1523,7 +1486,7 @@
static int i2ob_revalidate(struct gendisk *disk)
{
struct i2ob_device *p = disk->private_data;
- return i2ob_install_device(p->controller, p->i2odev, p->index<<4);
+ return i2ob_install_device(p->controller, p->i2odev, p->index);
}
/*
@@ -1536,7 +1499,7 @@
for(i=0;i<MAX_I2OB;i++)
{
- struct i2ob_device *dev=&i2ob_dev[(i<<4)];
+ struct i2ob_device *dev=&i2ob_dev[i];
if(dev->refcnt!=0)
{
@@ -1598,51 +1561,36 @@
if (register_blkdev(MAJOR_NR, "i2o_block"))
return -EIO;
- for (i = 0; i < MAX_I2OB; i++) {
- struct gendisk *disk = alloc_disk(16);
- if (!disk)
- goto oom;
- i2ob_dev[i<<4].index = i;
- disk->queue = i2ob_dev[i<<4].req_queue;
- i2ob_disk[i] = disk;
- }
#ifdef MODULE
printk(KERN_INFO "i2o_block: registered device at major %d\n", MAJOR_NR);
#endif
/*
+ * Set up the queue
+ */
+ for(i = 0; i < MAX_I2O_CONTROLLERS; i++)
+ i2ob_queues[i] = NULL;
+
+ /*
* Now fill in the boiler plate
*/
- for (i = 0; i < MAX_I2OB << 4; i++) {
- i2ob_dev[i].refcnt = 0;
- i2ob_dev[i].flags = 0;
- i2ob_dev[i].controller = NULL;
- i2ob_dev[i].i2odev = NULL;
- i2ob_dev[i].tid = 0;
- i2ob_dev[i].head = NULL;
- i2ob_dev[i].tail = NULL;
- i2ob_dev[i].depth = MAX_I2OB_DEPTH;
- i2ob_max_sectors[i] = 2;
- }
-
for (i = 0; i < MAX_I2OB; i++) {
- struct gendisk *disk = i2ob_disk[i];
- disk->major = MAJOR_NR;
- disk->first_minor = i<<4;
- disk->fops = &i2ob_fops;
- sprintf(disk->disk_name, "i2o/hd%c", 'a' + i);
+ struct i2ob_device *dev = &i2ob_dev[i];
+ dev->index = i;
+ dev->refcnt = 0;
+ dev->flags = 0;
+ dev->controller = NULL;
+ dev->i2odev = NULL;
+ dev->tid = 0;
+ dev->head = NULL;
+ dev->tail = NULL;
+ dev->depth = MAX_I2OB_DEPTH;
+ dev->max_sectors = 2;
+ dev->gd = NULL;
}
/*
- * Set up the queue
- */
- for(i = 0; i < MAX_I2O_CONTROLLERS; i++)
- {
- i2ob_queues[i] = NULL;
- }
-
- /*
* Register the OSM handler as we will need this to probe for
* drives, geometry and other goodies.
*/
@@ -1671,9 +1619,6 @@
return 0;
-oom:
- while (i--)
- put_disk(i2ob_disk[i]);
unregister_blkdev(MAJOR_NR, "i2o_block");
return -ENOMEM;
}
@@ -1701,11 +1646,8 @@
if(i2ob_dev_count) {
struct i2o_device *d;
for(i = 0; i < MAX_I2OB; i++)
- if((d=i2ob_dev[i<<4].i2odev)) {
- i2o_device_notify_off(d, &i2o_block_handler);
- i2o_event_register(d->controller, d->lct_data.tid,
- i2ob_context, i<<4, 0);
- }
+ if((d = i2ob_dev[i].i2odev))
+ i2ob_del_device(d->controller, d);
}
/*
@@ -1725,15 +1667,21 @@
*/
i2o_remove_handler(&i2o_block_handler);
-
- for (i = 0; i < MAX_I2OB; i++)
- put_disk(i2ob_disk[i]);
/*
* Return the block device
*/
if (unregister_blkdev(MAJOR_NR, "i2o_block") != 0)
printk("i2o_block: cleanup_module failed\n");
+
+ /*
+ * release request queue
+ */
+ for (i = 0; i < MAX_I2O_CONTROLLERS; i ++)
+ if(i2ob_queues[i]) {
+ blk_cleanup_queue(i2ob_queues[i]->req_queue);
+ kfree(i2ob_queues[i]);
+ }
}
MODULE_AUTHOR("Red Hat");
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-04-22 14:53 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-04-22 14:56 i2o_block-cleanup.patch for 2.6.6 with request for review Markus Lidel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.