* bootloader
@ 2004-06-04 7:51 Dmitriy Tochansky
2004-06-04 7:53 ` bootloader Tiemo Krueger - mycable.de
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Dmitriy Tochansky @ 2004-06-04 7:51 UTC (permalink / raw)
To: linux-mips
Hi!
Does anybody can advice me some bootloader for my Zinfandel(Db1500) board?
CU.
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: bootloader
2004-06-04 7:51 bootloader Dmitriy Tochansky
@ 2004-06-04 7:53 ` Tiemo Krueger - mycable.de
2004-06-04 8:09 ` bootloader Dmitriy Tochansky
2004-06-04 8:31 ` bootloader Wolfgang Denk
2004-06-04 15:39 ` bootloader Ed Okerson
2 siblings, 1 reply; 9+ messages in thread
From: Tiemo Krueger - mycable.de @ 2004-06-04 7:53 UTC (permalink / raw)
To: Dmitriy Tochansky; +Cc: linux-mips
Yamon should be in Flash of that board and start automatically...
If it doesn't start check the DIP Switches on the board for correct
settings.
(little/big endian, and I think you can switch between the flashes)
Tiemo
Dmitriy Tochansky wrote:
> Hi!
> Does anybody can advice me some bootloader for my Zinfandel(Db1500)
> board?
>
> CU.
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: bootloader
2004-06-04 7:53 ` bootloader Tiemo Krueger - mycable.de
@ 2004-06-04 8:09 ` Dmitriy Tochansky
2004-06-04 8:17 ` bootloader Tiemo Krueger - mycable.de
0 siblings, 1 reply; 9+ messages in thread
From: Dmitriy Tochansky @ 2004-06-04 8:09 UTC (permalink / raw)
To: Tiemo Krueger - mycable.de; +Cc: linux-mips
Tiemo Krueger - mycable.de wrote:
> Yamon should be in Flash of that board and start automatically...
> If it doesn't start check the DIP Switches on the board for correct
> settings.
> (little/big endian, and I think you can switch between the flashes)
>
>
> Tiemo
>
> Dmitriy Tochansky wrote:
> Does anybody can advice me some bootloader for my Zinfandel(Db1500)
> board?
>
Oops! Sorry. :) I mean another bootloader insted YAMON. I need to load
kernel from flash but not from LAN(tftp and etc). Can YAMON to do that?
CU
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: bootloader
2004-06-04 8:09 ` bootloader Dmitriy Tochansky
@ 2004-06-04 8:17 ` Tiemo Krueger - mycable.de
2004-06-04 8:32 ` bootloader Dmitriy Tochansky
0 siblings, 1 reply; 9+ messages in thread
From: Tiemo Krueger - mycable.de @ 2004-06-04 8:17 UTC (permalink / raw)
To: Dmitriy Tochansky; +Cc: linux-mips
Yes, it can!
There are two options, use a kernel simply compiled for ram,
load it via tftp, cp it to an erased flashed area.
then you can start it by copying it to ram and jump to the start address
inside the kernel.
the second more simple solution is to build a compressed kernel,
flash it e.g. to 0xbfd00000 and then simply go there for start.
Pls refer the Yamon help for any details, you can add a start variable
to the Yamon
config which is executed after two seconds if you don't stop this with
Ctrl-c via serial.
(set start 'go 0xbfd00000 root=/dev/mtdblock1' or whatever...)
Tiemo
Dmitriy Tochansky wrote:
> Tiemo Krueger - mycable.de wrote:
>
>> Yamon should be in Flash of that board and start automatically...
>> If it doesn't start check the DIP Switches on the board for correct
>> settings.
>> (little/big endian, and I think you can switch between the flashes)
>>
>>
>> Tiemo
>>
>> Dmitriy Tochansky wrote:
>> Does anybody can advice me some bootloader for my Zinfandel(Db1500)
>> board?
>>
> Oops! Sorry. :) I mean another bootloader insted YAMON. I need to load
> kernel from flash but not from LAN(tftp and etc). Can YAMON to do that?
>
> CU
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: bootloader
2004-06-04 8:17 ` bootloader Tiemo Krueger - mycable.de
@ 2004-06-04 8:32 ` Dmitriy Tochansky
0 siblings, 0 replies; 9+ messages in thread
From: Dmitriy Tochansky @ 2004-06-04 8:32 UTC (permalink / raw)
To: Tiemo Krueger - mycable.de; +Cc: linux-mips
Tiemo Krueger - mycable.de wrote:
> Yes, it can!
> There are two options, use a kernel simply compiled for ram,
> load it via tftp, cp it to an erased flashed area.
> then you can start it by copying it to ram and jump to the start
> address inside the kernel.
> the second more simple solution is to build a compressed kernel,
> flash it e.g. to 0xbfd00000 and then simply go there for start.
>
> Pls refer the Yamon help for any details, you can add a start variable
> to the Yamon
> config which is executed after two seconds if you don't stop this with
> Ctrl-c via serial.
>
> (set start 'go 0xbfd00000 root=/dev/mtdblock1' or whatever...)
>
Yes I did it that way. :) Thanks.
So is there other nice loaders for this board?
CU
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: bootloader
2004-06-04 7:51 bootloader Dmitriy Tochansky
2004-06-04 7:53 ` bootloader Tiemo Krueger - mycable.de
@ 2004-06-04 8:31 ` Wolfgang Denk
2004-06-04 15:39 ` bootloader Ed Okerson
2 siblings, 0 replies; 9+ messages in thread
From: Wolfgang Denk @ 2004-06-04 8:31 UTC (permalink / raw)
To: Dmitriy Tochansky; +Cc: linux-mips
In message <40C029F5.3040506@dfpost.ru> you wrote:
>
> Does anybody can advice me some bootloader for my Zinfandel(Db1500) board?
U-Boot?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
Men don't talk peace unless they're ready to back it up with war.
-- Col. Green, "The Savage Curtain", stardate 5906.4
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: bootloader
2004-06-04 7:51 bootloader Dmitriy Tochansky
2004-06-04 7:53 ` bootloader Tiemo Krueger - mycable.de
2004-06-04 8:31 ` bootloader Wolfgang Denk
@ 2004-06-04 15:39 ` Ed Okerson
2004-06-07 11:31 ` bootloader Dmitriy Tochansky
2 siblings, 1 reply; 9+ messages in thread
From: Ed Okerson @ 2004-06-04 15:39 UTC (permalink / raw)
To: Dmitriy Tochansky; +Cc: linux-mips
I have the same board and I use U-Boot.
Ed
On Fri, 4 Jun 2004, Dmitriy Tochansky wrote:
> Hi!
> Does anybody can advice me some bootloader for my Zinfandel(Db1500) board?
>
> CU.
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: bootloader
2004-06-04 15:39 ` bootloader Ed Okerson
@ 2004-06-07 11:31 ` Dmitriy Tochansky
2004-06-07 17:44 ` bootloader Ed Okerson
0 siblings, 1 reply; 9+ messages in thread
From: Dmitriy Tochansky @ 2004-06-07 11:31 UTC (permalink / raw)
To: Ed Okerson; +Cc: linux-mips
Ed Okerson wrote:
>I have the same board and I use U-Boot.
>
>
>>Hi!
>>Does anybody can advice me some bootloader for my Zinfandel(Db1500) board?
>>
>>CU.
>>
>>
Had you any problems in compile it?
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: bootloader
2004-06-07 11:31 ` bootloader Dmitriy Tochansky
@ 2004-06-07 17:44 ` Ed Okerson
0 siblings, 0 replies; 9+ messages in thread
From: Ed Okerson @ 2004-06-07 17:44 UTC (permalink / raw)
To: Dmitriy Tochansky; +Cc: linux-mips
On Mon, 7 Jun 2004, Dmitriy Tochansky wrote:
> Ed Okerson wrote:
>
> >I have the same board and I use U-Boot.
> >
> >>Hi!
> >>Does anybody can advice me some bootloader for my Zinfandel(Db1500) board?
> >>
> >>CU.
> >>
> >>
> Had you any problems in compile it?
It was somewhat difficult to get it working in little endian mode, but
once I did I submitted patches back to U-Boot and it should work fine now.
Ed Okerson
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2004-06-07 17:45 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-04 7:51 bootloader Dmitriy Tochansky
2004-06-04 7:53 ` bootloader Tiemo Krueger - mycable.de
2004-06-04 8:09 ` bootloader Dmitriy Tochansky
2004-06-04 8:17 ` bootloader Tiemo Krueger - mycable.de
2004-06-04 8:32 ` bootloader Dmitriy Tochansky
2004-06-04 8:31 ` bootloader Wolfgang Denk
2004-06-04 15:39 ` bootloader Ed Okerson
2004-06-07 11:31 ` bootloader Dmitriy Tochansky
2004-06-07 17:44 ` bootloader Ed Okerson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.