need help :)

need help :)

[Daniel Harris]

Hi , I have had some trouble with my harddrive... when I try boot it i
just get a init# prompt, when I mount it I cannot view certain
directories like /proc , /sbin , /home etc .. I can't erase them
either. I need to if possible recover the contents of /home and other
directories.

Here is the log of what happens when I run reiserfsck on the drive :

grow_id_map: objectid map expanded: used 5120, 5 blocks
grow_id_map: objectid map expanded: used 10240, 10 blocks
grow_id_map: objectid map expanded: used 10240, 10 blocks
shrink_id_map: objectid map shrinked: used 14336, 15 blocks
shrink_id_map: objectid map shrinked: used 14336, 15 blocks
grow_id_map: objectid map expanded: used 15360, 15 blocks
grow_id_map: objectid map expanded: used 20480, 20 blocks
grow_id_map: objectid map expanded: used 20480, 20 blocks
grow_id_map: objectid map expanded: used 20480, 20 blocks
grow_id_map: objectid map expanded: used 20480, 20 blocks
shrink_id_map: objectid map shrinked: used 24576, 25 blocks
shrink_id_map: objectid map shrinked: used 24576, 25 blocks
shrink_id_map: objectid map shrinked: used 24576, 25 blocks
shrink_id_map: objectid map shrinked: used 24576, 25 blocks
shrink_id_map: objectid map shrinked: used 24576, 25 blocks
shrink_id_map: objectid map shrinked: used 24576, 25 blocks
shrink_id_map: objectid map shrinked: used 24576, 25 blocks
shrink_id_map: objectid map shrinked: used 24576, 25 blocks
grow_id_map: objectid map expanded: used 25600, 25 blocks
grow_id_map: objectid map expanded: used 25600, 25 blocks
grow_id_map: objectid map expanded: used 25600, 25 blocks
grow_id_map: objectid map expanded: used 25600, 25 blocks
shrink_id_map: objectid map shrinked: used 24576, 25 blocks
grow_id_map: objectid map expanded: used 20480, 20 blocks
grow_id_map: objectid map expanded: used 20480, 20 blocks
shrink_id_map: objectid map shrinked: used 19456, 20 blocks
check_semantic_pass: name "sbin" in directory 2 51382 points to
nowhere
are_file_items_correct: symlink found in indirect item 159732 83499
are_file_items_correct: symlink found in indirect item 159732 70387
are_file_items_correct: symlink found in indirect item 159732 83521
are_file_items_correct: symlink found in indirect item 159732 83509
are_file_items_correct: symlink found in indirect item 159732 83501
are_file_items_correct: symlink found in indirect item 159732 72759
are_file_items_correct: symlink found in indirect item 159732 62602
are_file_items_correct: symlink found in indirect item 159732 47187
are_file_items_correct: symlink found in indirect item 159732 65099
are_file_items_correct: symlink found in indirect item 159732 83515
check_semantic_pass: name "local" in directory 2 51382 points to
nowhere
dir 90688 105103 has wrong sd_size 120, has to be 80
are_file_items_correct: symlink found in indirect item 109229 86382
are_file_items_correct: symlink found in indirect item 96298 74350
dir 90688 105035 has wrong sd_size 296, has to be 112
dir 90688 105143 has wrong sd_size 152, has to be 48
dir 90688 105116 has wrong sd_size 280, has to be 96
dir 90688 105032 has wrong sd_size 120, has to be 80
dir 90688 105081 has wrong sd_size 296, has to be 144
check_semantic_pass: hash mismatch detected (changglog.Dgbian.gz)
dir 90688 105051 has wrong sd_size 144, has to be 104
are_file_items_correct: symlink found in indirect item 72876 73039
dir 90688 105131 has wrong sd_size 392, has to be 136
dir 90688 105055 has wrong sd_size 232, has to be 96



I would like to know if there is any method to fix this...



thanks



- Daniel Harris
_______________________________________________________________
 http://www.webmail.co.za the South-African free email service

Re: need help :)

[Dirk Mueller]

On Don, 27 Jun 2002, Daniel Harris wrote:

> Here is the log of what happens when I run reiserfsck on the drive :
> 
	> grow_id_map: objectid map expanded: used 5120, 5 blocks

This is an extremely old reiserfsck version. Use a newer one. 


Dirk

Need help !

[Srinivasa Deevi]

Hi all

do I need to add any fonts in fonts directory to see the any console 
output through fbcon ? Right now I am able to see the blinking cursor 
but any data from it .

can somebody help me what should I do to see the cosole output on a 
frame buffer device ? The frame buffer driver is working in graphics 
mode . I have trouble in console mode .

thanks in advance,
sri



-------------------------------------------------------
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference
Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer
Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA
REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND

Re: Need help !

[David Eger]

On Mon, Jun 14, 2004 at 12:21:35PM -0700, Srinivasa Deevi wrote:

> do I need to add any fonts in fonts directory to see the any console 
> output through fbcon ? 

You shouldn't need to.

Have you set the fb_info[.*|.var.*|.fix.*] fields to reflect your hardware?
Try running 'fbset -i > stats.txt' blind from the console and affirm
that the settings are currect.

-dte


-------------------------------------------------------
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference
Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer
Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA
REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND

Re: Need help !

[Jan-Benedict Glaw]

[-- Attachment #1: Type: text/plain, Size: 1356 bytes --]

On Mon, 2004-06-14 12:21:35 -0700, Srinivasa Deevi <sdeevi%integrated-devices.com@integrated-devices.com>
wrote in message <40CDFABF.2020503@integrated-devices.com>:
> do I need to add any fonts in fonts directory to see the any console 
> output through fbcon ? Right now I am able to see the blinking cursor 
> but any data from it .

No, you don't need to add fonts, but make sure you've choosen at least
one of them:)

> can somebody help me what should I do to see the cosole output on a 
> frame buffer device ? The frame buffer driver is working in graphics 
> mode . I have trouble in console mode .

I've seen that, too, when I wrote a FB driver. My bug was that I was
missing

#ifdef CONFIG_VT
#ifdef CONFIG_DUMMY_CONSOLE
	/*
	 * We need a dummy console up at cons_init time, otherwise there'll
	 * be no VTs allocated for the real fbdev console to later take over.
	 */
	conswitchp = &dummy_con;
#endif
#endif

in arch-dependand code (for me, adding it to ./arch/vax/kernel/setup.c
did the job).

MfG, JBG

-- 
   Jan-Benedict Glaw       jbglaw@lug-owl.de    . +49-172-7608481
   "Eine Freie Meinung in  einem Freien Kopf    | Gegen Zensur | Gegen Krieg
    fuer einen Freien Staat voll Freier Bürger" | im Internet! |   im Irak!
   ret = do_actions((curr | FREE_SPEECH) & ~(NEW_COPYRIGHT_LAW | DRM | TCPA));

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Need Help !!!

[Biswajit Paul]

HI,

   Can u help me ???

 ---------------------------------------------------------------------
 INTRO :
 ----------------------------------------------------------------------
   i need to maintain counters for number of packets

 1. drop
 2. accepted.
 by Netfilter and the protocol distribution among them.

 i put two counters in nf_hook_slow(...) function inB
net/core/netfilter.c

   switch(verdict){
                    case NF_ACCEPT:
                              pkt_accept_count++;
                    case NF_DROP :
                              pkt_drop_count++;
   }

 -----------------------------------------------------------------------
 OBSERVATION :
 -----------------------------------------------------------------------

                when default policy is ACCEPT and i write rules to drop
selective packets i am getting the appropiate values of counters.

                but when the default policy is DROP and no other rule for
ACCEPT then both the counters (pkt_accept_count and pkt_drop_count ) are
incrementing !!!!


 -----------------------------------------------------------------------
 QUERY :
 -----------------------------------------------------------------------

             1. As i am not accepting a single packet the why
pkt_accept_count counter is incrementing !!!

             2. Is there any other better way to do the job ?
 -----------------------------------------------------------------------

 Regards

          Biswajit

Need help!

[leon_tseng]

Currently, i am implementing isakmp/ike nat helper. As isakmp always uses source
port 500, destination port 500. After the first connection is established, the
second connection's source port will be changed to another port. How can i make
nelfilter not to change the source port? Currently my idea is to demultiplex the
connection through isakmp icookie/rcookie.  How to achieve this? Thanks. Your
help will be appreciated.

need help!

[rong wang]

Here is the question

1, If I have my own CODEC plugin (optimizied version),
how could I install it within ALSA?

2. Where is the sound effect processing in ALSA?

Last time, Lee answered my question, but
unfortunately, I lost his email address. 
Anybody answered my question, appreciated!

Rhong

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click

Need help !

[Bo Yang]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi ,
    Everybody , I am on the list for a month ,
everytime I saw your question and answers , I
just want to reproduct your enviroment and trouble ,
and then slove it .
    But your troubles almost occur in the very
complicated enviroment such as two router with four
LANs and a PPP interface and etc.

    How can I simulate such a condition ?
I have thought about do it using VMWare , but I need
many vms , and my system can't afford such a load !
    Is there any software to achive such a task ?

Thank you !

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFFNylj7tZp58UCwyMRAswLAKDb6M51SSCwdTzZEkE/RE0Iwt4s0ACfUnqf
YDVevTQAXnzCK0WJJuCHxPY=
=8cfF
-----END PGP SIGNATURE-----

Re: Need help !

[Bo Yang]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
 
Jasbir Khehra :


Thank you !
I am downloading it now !
And I have take a look at the introduction , good tools .
But I also want to know  ,
Does netkit has the ablity to let my VMWare machine to be a node in
the vitual network ?
I have read the introduction , found it may not !


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
 
iD8DBQFFOK7H7tZp58UCwyMRAso3AKDKMUPq0Xcj9yCdzq46i/v9HdFymwCdF8sN
51cyO5ticY62uW2s+/bv40M=
=i+/6
-----END PGP SIGNATURE-----

Re: Need help !

[Jasbir Khehra]

Bo Yang wrote:

>-----BEGIN PGP SIGNED MESSAGE-----
>Hash: SHA1
>
>Hi ,
>    Everybody , I am on the list for a month ,
>everytime I saw your question and answers , I
>just want to reproduct your enviroment and trouble ,
>and then slove it .
>    But your troubles almost occur in the very
>complicated enviroment such as two router with four
>LANs and a PPP interface and etc.
>
>    How can I simulate such a condition ?
>I have thought about do it using VMWare , but I need
>many vms , and my system can't afford such a load !
>    Is there any software to achive such a task ?
>
>Thank you !
>
>-----BEGIN PGP SIGNATURE-----
>Version: GnuPG v1.4.5 (MingW32)
>Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
>iD8DBQFFNylj7tZp58UCwyMRAswLAKDb6M51SSCwdTzZEkE/RE0Iwt4s0ACfUnqf
>YDVevTQAXnzCK0WJJuCHxPY=
>=8cfF
>-----END PGP SIGNATURE----
>
netkit >> netkit.org
HTH
-Jasbir

Re: Need help !

[Nathan]

Try Xen or V-Server


Quoting Jasbir Khehra <jasbir.k@gmail.com>:

> Bo Yang wrote:
> 
> >-----BEGIN PGP SIGNED MESSAGE-----
> >Hash: SHA1
> >
> >Hi ,
> >    Everybody , I am on the list for a month ,
> >everytime I saw your question and answers , I
> >just want to reproduct your enviroment and trouble ,
> >and then slove it .
> >    But your troubles almost occur in the very
> >complicated enviroment such as two router with four
> >LANs and a PPP interface and etc.
> >
> >    How can I simulate such a condition ?
> >I have thought about do it using VMWare , but I need
> >many vms , and my system can't afford such a load !
> >    Is there any software to achive such a task ?
> >
> >Thank you !
> >
> >-----BEGIN PGP SIGNATURE-----
> >Version: GnuPG v1.4.5 (MingW32)
> >Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
> >
> >iD8DBQFFNylj7tZp58UCwyMRAswLAKDb6M51SSCwdTzZEkE/RE0Iwt4s0ACfUnqf
> >YDVevTQAXnzCK0WJJuCHxPY=
> >=8cfF
> >-----END PGP SIGNATURE----
> >
> netkit >> netkit.org
> HTH
> -Jasbir
> 




Thanks

- Nathan
- http://www.linuxcare.ca