[Qemu-devel] Darwin 7.01

[Qemu-devel] Darwin 7.01

[Fabrice Bellard]

Hi,

Darwin 7.01 x86 should work better now. In order to make it work, PCI 
IDE DMA was added, but it is kept disabled in the BIOS so that most OSes 
won't use it as it is not considered as stable yet.

Fabrice.

Re: [Qemu-devel] Darwin 7.01

[Jean-Michel POURE]

> Darwin 7.01 x86 should work better now. In order to make it work, PCI
> IDE DMA was added, but it is kept disabled in the BIOS so that most OSes
> won't use it as it is not considered as stable yet.

Wonderful. Magic. The installation of Darwin 7.01 worked like a charm. An 
image is being uploaded to http://www.poure.com/qemu. It will be available 
Sunday morning.

A question about MacOsX 10.2 support, which is based on:
http://www.opensource.apple.com/darwinsource/images/darwinppc-602.cdr.gz

On startup of darwinppc-602.cdr, the error message is exactly
the same as when starting MacOsX 10.2:

http://www.poure.com/screenshots/qemu_temp_9.png

MacOsX is just a graphical layer on top of Darwin. Do you think that there are 
chances to install DarwinPPC-602 soon?

Cheers,
Jean-Michel Pouré

Re: [Qemu-devel] Darwin 7.01

[Pierre d'Herbemont]

Le 26 juin 04, à 16:22, Jean-Michel POURE a écrit :

> On startup of darwinppc-602.cdr, the error message is exactly
> the same as when starting MacOsX 10.2:
>
> http://www.poure.com/screenshots/qemu_temp_9.png
>

Try to start up Mac OS X/Darwin using the -v (verbose) option. You'll 
have more informations about the kernel panic.

Pierre

Re: [Qemu-devel] Darwin 7.01

[Jean-Michel POURE]

Le samedi 26 Juin 2004 17:16, vous avez écrit :
> Try to start up Mac OS X/Darwin using the -v (verbose) option. You'll
> have more informations about the kernel panic.

Dear Pierre,

I only have a MacOsX 10.2 unused license, I cannot test MacOsX 10.3.

When loading Darwin 6.02 PPC or MacOs10.2, I do not come to a point where a 
text prompt is displayed. The only messages are:

In qemu shell:

Mac OS X Loader
Opening partition [/pci@f2000000/mac-io@e/ata-4@1f000/disk@0/disk@0:1]...
HFSInitPartition: 1f0014
Loading HFS+ file: [\\mach_kernel] from 1f0014.
Loading HFS+ file: [\mach_kernel] from 1f0014.
LoadDrivers: Loading from [/pci@f2000000/mac-io@e/ata-4@1f000/disk@0/disk@0:1,
\System\Library\Extensions.mkext]
Loading HFS+ file: [\System\Library\Extensions.mkext] from 1f0014.

Screenshots:
http://www.poure.com/screenshots/qemu_temp_14.png
http://www.poure.com/screenshots/qemu_temp_13.png

On the first screenshot, we can notice the following message:
"ide1:drive0:CDROM
no ISO9660 signature"

Just a guess: could to be a similar problem to the bug of Darwin 7.02 PPC 
CDROM not being recognized.

Kindest regards,
Jean-Michel

Re: [Qemu-devel] Darwin 7.01

[Brad Watson]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=us-ascii, Size: 1507 bytes --]

Hi Jean-Micel,

Would you mind telling me which qemu cvs version you
are using, which darwin cdrom image, and which options
you are specifying that allowed you to run darwin x86
?  Currently when I attempt to run, it just hangs
displaying an "apple...."

Thank you kindly,

Brad Watson

--- Jean-Michel POURE <jm@poure.com> wrote:
> > Darwin 7.01 x86 should work better now. In order
> to make it work, PCI
> > IDE DMA was added, but it is kept disabled in the
> BIOS so that most OSes
> > won't use it as it is not considered as stable
> yet.
> 
> Wonderful. Magic. The installation of Darwin 7.01
> worked like a charm. An 
> image is being uploaded to
> http://www.poure.com/qemu. It will be available 
> Sunday morning.
> 
> A question about MacOsX 10.2 support, which is based
> on:
>
http://www.opensource.apple.com/darwinsource/images/darwinppc-602.cdr.gz
> 
> On startup of darwinppc-602.cdr, the error message
> is exactly
> the same as when starting MacOsX 10.2:
> 
> http://www.poure.com/screenshots/qemu_temp_9.png
> 
> MacOsX is just a graphical layer on top of Darwin.
> Do you think that there are 
> chances to install DarwinPPC-602 soon?
> 
> Cheers,
> Jean-Michel Pouré
> 
> 
> _______________________________________________
> Qemu-devel mailing list
> Qemu-devel@nongnu.org
> http://lists.nongnu.org/mailman/listinfo/qemu-devel
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

Re: [Qemu-devel] Darwin 7.01

[Jean-Michel POURE]

Le samedi 26 Juin 2004 18:29, vous avez écrit :
> Would you mind telling me which qemu cvs version you
> are using, which darwin cdrom image, and which options
> you are specifying that allowed you to run darwin x86
> ?  Currently when I attempt to run, it just hangs
> displaying an "apple...."

Dear Brad,

- Qemu CVS version head from today 26/06/2004 (this morning French time). I 
did not upgrade to the latest changes committed afterwards.

- The CD-ROM installers from Darwin can be fetched from:
http://www.opensource.apple.com/darwinsource/

I downloaded and installed: 
http://www.opensource.apple.com/darwinsource/images/darwin-701.iso.gz

- Then I booted the Darwin guest:
qemu -cdrom darwin-701.iso -hda hd.img -m 128 -boot d -cirrusvga -user-net

According to the Darwin howto, networking under x86 only works with precise 
3Com network card (from memory, I did not check again). Therefore, it is 
likely that networking cannot work in the guest. This limitation does not 
exist in the PPC versions.

MacOsX is entirely based on free software:  achieving to run Darwin-701 PPC or 
Darwin-6.02 PPC in qemu-system-ppc should bring MacOsX 10.3 and MacOsX 10.2 
respectively. The PPC images can be fetched from:

- Darwin-7.01 for PPC (a bug in the PPC bios prevents the iso from booting 
according to Jocelyn.):
http://www.opensource.apple.com/darwinsource/images/darwin-701.iso.gz

- Darwin-6.02 for PPC:
http://www.opensource.apple.com/darwinsource/images/darwinppc-602.cdr.gz

Kindest regards,
Jean-Michel