* irq X: nobody cared, Stack pointer is garbage
@ 2004-06-30 12:00 Daniel Wagner
0 siblings, 0 replies; only message in thread
From: Daniel Wagner @ 2004-06-30 12:00 UTC (permalink / raw)
To: linux-kernel
Hello!
When i was first trying linux kernel 2.6.7 (compiled with gcc 3.3.4) i
always got the following error during booting:
irq 11: nobody cared!
Stack pointer is garbage, not printing trace
handlers:
[<c027d140>] (ata_interrupt+0x0/0x140)
[<f0c512e0>] (usb_hcd_irq+0x0/0x70 [usbcore])
Disabling IRQ 11
As an effect no device which is assigned to irq 11 did work (e.g.
soundcard and sata-controller)
Currently i'm testing my system without "noapic nolapic" parameters and
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
enabled.
I use an Asus A7N8X2.0 Deluxe mainboard (nForce2 chipset).
With previous versions of the linux kernel i never had this problem.
Any suggestions.
greetings,
Daniel
--
Nuclear weapons can wipe out life on Earth, if used properly.
(http://kwaxi.org)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-06-30 12:00 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-30 12:00 irq X: nobody cared, Stack pointer is garbage Daniel Wagner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.