[LARTC] Re: e: [T] filter ingress policy rates -> slow!!

[LARTC] Re: e: [T] filter ingress policy rates -> slow!!

[Edulix]

El Jueves, 1 de Julio de 2004 22:40, Stef Coene escribió:
> Can you post the tc counters?
> tc -s -d qdisc filter ffff:
>
> Stef

Sure:

BTW, that command d9oesn't work fine here:
[root@k12ltsp-server root]# tc -s -d qdisc filter ffff:
Command "filter" is unknown, try "tc qdisc help".
So let's just print:

[root@k12ltsp-server root]# /etc/init.d/eshaper start downlink
Applying tc rules:                                         [  OK  ]

(That command starts *only* ingress policies)
[root@k12ltsp-server root]# tc -s -d qdisc
qdisc ingress ffff: dev eth0 ----------------
 Sent 384 bytes 3 pkts (dropped 0, overlimits 0)
[root@k12ltsp-server root]#

Is this normal or expected?

Thanks for your time,
    Edulix.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] Re: e: [T] filter ingress policy rates -> slow!!

[gypsy]

Edulix wrote:
> (That command starts *only* ingress policies)
> [root@k12ltsp-server root]# tc -s -d qdisc
> qdisc ingress ffff: dev eth0 ----------------
>  Sent 384 bytes 3 pkts (dropped 0, overlimits 0)
> [root@k12ltsp-server root]#

This is a joke?  You have not demonstrated any slowdown.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/