From: Tiemo Krueger - mycable GmbH <tk@mycable.de>
To: safiudeen Ts <safiudeen@hotmail.com>, linux-mips@linux-mips.org
Subject: Re: Jtag spec. and the firmware for Au1100
Date: Tue, 13 Jul 2004 10:37:05 +0200 [thread overview]
Message-ID: <40F39F31.70102@mycable.de> (raw)
In-Reply-To: <BAY15-F33CIq1eE3VsX00049230@hotmail.com>
Normally you could use a boatloader like Yamon or uboot to load something
from a tftp-server or serial conenction on the board. If there isn't any
bootloader
on the board you have to flash one on your board. This should normally
be provided
with the board (which one do you have?).
Ejtag: The pin specification for ejtag should be in the board
documentation, normally
it's quite easy to build an adapter to connect it to ejtag hardware like
the bdi2000 or similar.
firmware: So you mean a kernel and maybe a rootfile-system? Didn't came
anything with the board?
Depending on the HW-components on the board you may require your own
kernel which
you can build from the sources on Linux-mips.org, try at first a default
configuration for the Au1100.
Tiemo
safiudeen Ts wrote:
> How can we copy the kernel image to target board (processor au1100 )?
> if we want to use JTAG where can I get the jatg schemetic detailes and
> the firmware for Red Hat linux 9
> please any one can help me in this regards
>
> than you
> safi
>
> _________________________________________________________________
> Protect your PC - get McAfee.com VirusScan Online
> http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>
>
>
next prev parent reply other threads:[~2004-07-13 8:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-13 8:23 Jtag spec. and the firmware for Au1100 safiudeen Ts
2004-07-13 8:31 ` Wolfgang Denk
2004-07-13 8:37 ` Tiemo Krueger - mycable GmbH [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-07-13 9:04 safiudeen Ts
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40F39F31.70102@mycable.de \
--to=tk@mycable.de \
--cc=linux-mips@linux-mips.org \
--cc=safiudeen@hotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.