From: Benoit Boissinot <bboissin@gmail.com>
To: Stephen Hemminger <shemminger@osdl.org>
Cc: netdev@oss.sgi.com, Jeff Garzik <jgarzik@pobox.com>,
Christoph Hellwig <hch@infradead.org>
Subject: Re: [RFT] New syskonnect gigabit ether driver (skge)
Date: Mon, 17 Jan 2005 14:35:06 +0100 [thread overview]
Message-ID: <40f323d0050117053528f7ac8@mail.gmail.com> (raw)
> Here is my rewrite of the SysKonnect Gigabit Ether driver. Gave up on
> the existing sk98lin driver because it bloated and limited by the requirement
> to be portable. This version is still very experimental and has only been
> run for several days on my LinkSys card (single port Yukon).
> Please test on other hardware and let me know what you find out.
I had no problem with it with the following card (3Com) (not tested in
GigaEthernet mode):
(kernel 2.6.11-rc1-mm1)
0000:00:09.0 Ethernet controller: 3Com Corporation 3c940
10/100/1000Base-T [Marvell] (rev 12)
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5750ns min, 7750ns max), cache line size 08
Interrupt: pin A routed to IRQ 177
Region 0: Memory at d6800000 (32-bit, non-prefetchable)
Region 1: I/O ports at b800 [size=256]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
next reply other threads:[~2005-01-17 13:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-17 13:35 Benoit Boissinot [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-01-14 23:56 [RFT] New syskonnect gigabit ether driver (skge) Stephen Hemminger
2005-01-17 21:07 ` Michal Schmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40f323d0050117053528f7ac8@mail.gmail.com \
--to=bboissin@gmail.com \
--cc=hch@infradead.org \
--cc=jgarzik@pobox.com \
--cc=netdev@oss.sgi.com \
--cc=shemminger@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.