From: Michal Schmidt <xschmi00@stud.feec.vutbr.cz>
To: Stephen Hemminger <shemminger@osdl.org>
Cc: Jeff Garzik <jgarzik@pobox.com>,
Christoph Hellwig <hch@infradead.org>,
netdev@oss.sgi.com
Subject: Re: [RFT] New syskonnect gigabit ether driver (skge)
Date: Mon, 17 Jan 2005 22:07:07 +0100 [thread overview]
Message-ID: <41EC28FB.3040904@stud.feec.vutbr.cz> (raw)
In-Reply-To: <20050114155613.3c68e829@dxpl.pdx.osdl.net>
Stephen Hemminger wrote:
> Here is my rewrite of the SysKonnect Gigabit Ether driver. Gave up on
> the existing sk98lin driver because it bloated and limited by the requirement
> to be portable. This version is still very experimental and has only been
> run for several days on my LinkSys card (single port Yukon).
> Please test on other hardware and let me know what you find out.
Works with no problems with the integrated card on my Asus A8V Deluxe
motherboard (architecture is x86_64). I only tested 100Mbit full-duplex.
0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. Yukon
Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
Subsystem: Asustek Computer, Inc.: Unknown device 811a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fb900000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at 9800 [size=256]
Expansion ROM at fb800000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
next prev parent reply other threads:[~2005-01-17 21:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-14 23:56 [RFT] New syskonnect gigabit ether driver (skge) Stephen Hemminger
2005-01-17 21:07 ` Michal Schmidt [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-01-17 13:35 Benoit Boissinot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41EC28FB.3040904@stud.feec.vutbr.cz \
--to=xschmi00@stud.feec.vutbr.cz \
--cc=hch@infradead.org \
--cc=jgarzik@pobox.com \
--cc=netdev@oss.sgi.com \
--cc=shemminger@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.