All of lore.kernel.org
 help / color / mirror / Atom feed
From: Benoit Boissinot <bboissin@gmail.com>
To: Vojtech Pavlik <vojtech@suse.cz>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Andrew Morton <akpm@osdl.org>
Subject: New ALPS code in -mm
Date: Fri, 4 Mar 2005 22:02:03 +0100	[thread overview]
Message-ID: <40f323d005030413024d71e3f9@mail.gmail.com> (raw)
In-Reply-To: <20050301115432.GA5598@ucw.cz>

[-- Attachment #1: Type: text/plain, Size: 1355 bytes --]

On Tue, 1 Mar 2005 12:54:32 +0100, Vojtech Pavlik <vojtech@suse.cz> wrote:
> 
> Can you check with a current -mm kernel whether any of the issues is
> still there? Everything seems to work smoothly with my ALPS.
> 

I have problems with ALPS and 2.6.11-mm1. If I move the pointer with
the touchpad, it activates button modifiers at the same time. (xev
reports a MotionNotify event with state = 0x600 or sometimes 0x200
instead of the expected 0x0).

Moreover the pointer sometimes jump at the bottom right of the screen.

It worked fine with 2.6.11-rc5-mm1.

relevant portion of dmesg:

- with rc5:

Linux version 2.6.11-rc5-mm1 (tonfa@casaverde) (gcc version
3.4.3-20050110 (Gentoo Linux 3.                4.3.20050110,
ssp-3.4.3.20050110-0, pie-8.7.7)) #2 Tue Mar 1 13:33:05 CET 2005
input: AT Translated Set 2 keyboard on isa0060/serio0
ALPS Touchpad (Dualpoint) detected
Enabling hardware tapping
input: AlpsPS/2 ALPS TouchPad on isa0060/serio1

- with .11

Linux version 2.6.11-mm1 (tonfa@casaverde) (gcc version 3.4.3-20050110
(Gentoo Linux 3.4.3.                20050110, ssp-3.4.3.20050110-0,
pie-8.7.7)) #5 Fri Mar 4 16:49:47 CET 2005
input: AT Translated Set 2 keyboard on isa0060/serio0
   Enabling hardware tapping
input: DualPoint Stick on isa0060/serio1
input: AlpsPS/2 ALPS DualPoint TouchPad on isa0060/serio1

I hope it can help.

Benoit

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: lspci.log --]
[-- Type: text/x-log; name="lspci.log", Size: 5206 bytes --]

0000:00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
	Flags: bus master, fast devsel, latency 0
	Memory at e0000000 (32-bit, prefetchable)
	Capabilities: <available only to root>

0000:00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, 66Mhz, fast devsel, latency 32
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fc000000-fdffffff
	Prefetchable memory behind bridge: e8000000-efffffff
	Expansion ROM at 0000c000 [disabled] [size=4K]

0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation: Unknown device 4541
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at bf80 [size=32]

0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation: Unknown device 4541
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at bf40 [size=32]

0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation: Unknown device 4541
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at bf20 [size=32]

0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
	Subsystem: Dell: Unknown device 011d
	Flags: bus master, medium devsel, latency 0, IRQ 11
	Memory at f4fffc00 (32-bit, non-prefetchable)
	Capabilities: <available only to root>

0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000d000-0000efff
	Memory behind bridge: f6000000-fbffffff

0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
	Flags: bus master, medium devsel, latency 0

0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
	Subsystem: Intel Corporation: Unknown device 4541
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at <ignored>
	I/O ports at <ignored>
	I/O ports at <ignored>
	I/O ports at <ignored>
	I/O ports at bfa0 [size=16]
	Memory at 20000000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
	Subsystem: Dell: Unknown device 011d
	Flags: bus master, medium devsel, latency 0, IRQ 5
	I/O ports at b800
	I/O ports at bc40 [size=64]
	Memory at f4fff800 (32-bit, non-prefetchable) [size=512]
	Memory at f4fff400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <available only to root>

0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
	Subsystem: Conexant: Unknown device 5422
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at b400
	I/O ports at b080 [size=128]
	Capabilities: <available only to root>

0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [FireGL 9000] (rev 02) (prog-if 00 [VGA])
	Subsystem: Dell: Unknown device 011d
	Flags: bus master, VGA palette snoop, stepping, 66Mhz, medium devsel, latency 32, IRQ 11
	Memory at e8000000 (32-bit, prefetchable)
	I/O ports at c000 [size=256]
	Memory at fcff0000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <available only to root>

0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01)
	Subsystem: Dell: Unknown device 865d
	Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
	Memory at faff0000 (64-bit, non-prefetchable)
	Capabilities: <available only to root>

0000:02:01.0 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
	Subsystem: Dell: Unknown device 011d
	Flags: slow devsel, IRQ 255
	Memory at 20001000 (32-bit, non-prefetchable) [disabled]
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	I/O window 0: 00000000-00000003 [disabled]
	I/O window 1: 00000000-00000003 [disabled]
	16-bit legacy interface ports at 0001

0000:02:01.1 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
	Subsystem: Dell: Unknown device 011d
	Flags: slow devsel, IRQ 255
	Memory at 20002000 (32-bit, non-prefetchable) [disabled]
	Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
	I/O window 0: 00000000-00000003 [disabled]
	I/O window 1: 00000000-00000003 [disabled]
	16-bit legacy interface ports at 0001

0000:02:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
	Subsystem: Intel Corporation: Unknown device 2722
	Flags: bus master, medium devsel, latency 32, IRQ 11
	Memory at fafef000 (32-bit, non-prefetchable)
	Capabilities: <available only to root>


[-- Attachment #3: config.gz --]
[-- Type: application/gzip, Size: 9034 bytes --]

  reply	other threads:[~2005-03-04 22:27 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-02-24 23:29 ALPS tapping disabled. WHY? Ian E. Morgan
2005-02-25  3:08 ` Dmitry Torokhov
2005-02-27  7:50   ` Vojtech Pavlik
2005-02-28 22:23     ` Ian E. Morgan
2005-03-01 11:40       ` David Ford
2005-03-01 11:54         ` Vojtech Pavlik
2005-03-04 21:02           ` Benoit Boissinot [this message]
2005-03-04 21:13             ` New ALPS code in -mm Vojtech Pavlik
2005-03-07  7:14               ` Daniel Barkalow
2005-03-07  7:30                 ` Vojtech Pavlik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=40f323d005030413024d71e3f9@mail.gmail.com \
    --to=bboissin@gmail.com \
    --cc=akpm@osdl.org \
    --cc=dtor_core@ameritech.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vojtech@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.