* Major problems with USB Mass-Storage device
@ 2004-08-13 23:37 Mike
0 siblings, 0 replies; 2+ messages in thread
From: Mike @ 2004-08-13 23:37 UTC (permalink / raw)
To: linux-kernel
When trying to mount disks in my HP DVD200E USB/Firewire (connected via
USB 2.0) writer:
ehci_hcd 0000:00:09.3: devpath 1 ep2in 3strikes
ehci_hcd 0000:00:09.3: devpath 1 ep1out 3strikes
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
ehci_hcd 0000:00:09.3: devpath 1 ep1out 3strikes
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sr0, sector 8
Buffer I/O error on device sr0, logical block 1
ehci_hcd 0000:00:09.3: devpath 1 ep2in 3strikes
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sr0, sector 16
Buffer I/O error on device sr0, logical block 2
end_request: I/O error, dev sr0, sector 24
Buffer I/O error on device sr0, logical block 3
Buffer I/O error on device sr0, logical block 4
Buffer I/O error on device sr0, logical block 5
Buffer I/O error on device sr0, logical block 6
Buffer I/O error on device sr0, logical block 7
Buffer I/O error on device sr0, logical block 8
Buffer I/O error on device sr0, logical block 9
Buffer I/O error on device sr0, logical block 10
Buffer I/O error on device sr0, logical block 11
Buffer I/O error on device sr0, logical block 12
Buffer I/O error on device sr0, logical block 13
Buffer I/O error on device sr0, logical block 14
Buffer I/O error on device sr0, logical block 15
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 8
ehci_hcd 0000:00:09.3: devpath 1 ep2in 3strikes
ehci_hcd 0000:00:09.3: devpath 1 ep2in 3strikes
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
I can confirm that the DVD I am trying to mount works fine in my Samsung
SD-610 DVD-ROM drive, which is /dev/hdd.
When attempting to read files on any DVD, I get errors similar to:
ehci_hcd 0000:00:09.3: devpath 1 ep2in 3strikes
I am also seeing seek errors when playing MP3s that are stored on this DVD.
This is the output of /sbin/lspci -v -v, just in case it's necessary:
root@opiate:/home/cpio# /sbin/lspci -v -v
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] (rev c4)
Subsystem: Asustek Computer, Inc.: Unknown device 8018
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
Rate=x2
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d6000000-d76fffff
Prefetchable memory behind bridge: d7700000-e3ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South]
(rev 23)
Subsystem: Asustek Computer, Inc.: Unknown device 8018
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:04.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 10)
(prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 11) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 4
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management
(rev 30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:09.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
Subsystem: ALi Corporation USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d5800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
(prog-if 20 [EHCI])
Subsystem: Unknown device 2020:8888
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 4
Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [2090]
00:0a.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX
(rev 10)
Subsystem: Hewlett-Packard Company: Unknown device 9207
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at d4800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
Subsystem: Creative Labs CT4832 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at b800 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 08)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at b400 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti
4200] (rev a3) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at d7800000 (32-bit, prefetchable) [size=512K]
Expansion ROM at d77e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit-
FW- Rate=x2
This is the output of lsusb -v -v, just in case this is needed as well:
Bus 002 Device 003: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x045e Microsoft Corp.
idProduct 0x0040 Wheel Mouse Optical
bcdDevice 3.00
iManufacturer 1 Microsoft
iProduct 3 Microsoft 3-Button Mouse with IntelliEye(TM)
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 bytes 4 three times
bInterval 10
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 72
Bus 002 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x058f Alcor Micro Corp.
idProduct 0x9254 Hub
bcdDevice 1.00
iManufacturer 1 ALCOR
iProduct 2 Generic USB Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 bytes 1 once
bInterval 255
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.7 uhci_hcd
iProduct 2 VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller
iSerial 1 0000:00:04.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 255
Bus 001 Device 002: ID 03f0:0507 Hewlett-Packard
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x03f0 Hewlett-Packard
idProduct 0x0507
bcdDevice 3.10
iManufacturer 73 Hewlett-Packard
iProduct 89 USB Storage Adapter
iSerial 109
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 2
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 bytes 512 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 bytes 512 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 9
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.7 ehci_hcd
iProduct 2 ALi Corporation USB 2.0 Controller
iSerial 1 0000:00:09.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 12
root@opiate:/home/cpio# lsusb -v -v
Bus 002 Device 003: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x045e Microsoft Corp.
idProduct 0x0040 Wheel Mouse Optical
bcdDevice 3.00
iManufacturer 1 Microsoft
iProduct 3 Microsoft 3-Button Mouse with IntelliEye(TM)
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 bytes 4 three times
bInterval 10
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 72
Bus 002 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x058f Alcor Micro Corp.
idProduct 0x9254 Hub
bcdDevice 1.00
iManufacturer 1 ALCOR
iProduct 2 Generic USB Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 bytes 1 once
bInterval 255
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.7 uhci_hcd
iProduct 2 VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller
iSerial 1 0000:00:04.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 255
Bus 001 Device 002: ID 03f0:0507 Hewlett-Packard
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x03f0 Hewlett-Packard
idProduct 0x0507
bcdDevice 3.10
iManufacturer 73 Hewlett-Packard
iProduct 89 USB Storage Adapter
iSerial 109 0000000000024286
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 2
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 bytes 512 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 bytes 512 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 9
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.7 ehci_hcd
iProduct 2 ALi Corporation USB 2.0 Controller
iSerial 1 0000:00:09.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 12
This are my boot messages, just in case:
Linux version 2.6.7 (root@opiate) (gcc version 3.3.4) #2 Fri Aug 13
18:53:10 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ffc000 (usable)
BIOS-e820: 0000000017ffc000 - 0000000017fff000 (ACPI data)
BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB LOWMEM available.
On node 0 totalpages: 98300
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 94204 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux ro root=301
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
CPU 0 irqstacks, hard=c03b4000 soft=c03b3000
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 731.486 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 386368k/393200k available (1872k kernel code, 6084k reserved,
751k data, 128k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1441.79 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 731.0338 MHz.
..... host bus clock speed is 132.0970 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0a00, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0596] at 0000:00:04.0
IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
udf: registering filesystem
Activating ISA DMA hang workarounds.
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 10 for device 0000:00:0a.0
eth0: RealTek RTL8139 at 0xd880d000, 00:10:b5:58:c8:d7, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139B'
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:04.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci0000:00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 94610U6, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: OPTORITECD-RW CW5201, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG DVD-ROM SD-612, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 90045648 sectors (46103 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66)
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X DVD-ROM drive, 512kB Cache, UDMA(33)
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
PCI: Found IRQ 4 for device 0000:00:09.3
PCI: Sharing IRQ 4 with 0000:00:04.2
ehci_hcd 0000:00:09.3: ALi Corporation USB 2.0 Controller
ehci_hcd 0000:00:09.3: reset hcs_params 0x101216 dbg=1 cc=1 pcc=2
ordered ports=6
ehci_hcd 0000:00:09.3: reset hcc_params 7002 thresh 0 uframes 256/512/1024
ehci_hcd 0000:00:09.3: capability 0001 at 70
ehci_hcd 0000:00:09.3: irq 4, pci mem d880f000
ehci_hcd 0000:00:09.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:09.3: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
ehci_hcd 0000:00:09.3: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:09.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
ehci_hcd 0000:00:09.3: supports USB remote wakeup
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: default language 0x0409
usb usb1: Product: ALi Corporation USB 2.0 Controller
usb usb1: Manufacturer: Linux 2.6.7 ehci_hcd
usb usb1: SerialNumber: 0000:00:09.3
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: individual port power switching
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: enabling power on all ports
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 4 for device 0000:00:04.2
PCI: Sharing IRQ 4 with 0000:00:09.3
uhci_hcd 0000:00:04.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
uhci_hcd 0000:00:04.2: irq 4, io base 0000d400
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:04.2: detected 2 ports
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: default language 0x0409
usb usb2: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
usb usb2: Manufacturer: Linux 2.6.7 uhci_hcd
usb usb2: SerialNumber: 0000:00:04.2
usb usb2: hotplug
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: hotplug
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/media/usbvideo.c: usbvideo_register: module == NULL!
usbcore: registered new driver ibmcam
drivers/usb/media/usbvideo.c: usbvideo_register: module == NULL!
usbcore: registered new driver ultracam
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
ehci_hcd 0000:00:09.3: GetStatus port 1 status 001803 POWER sig=j CSC
CONNECT
hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 128k freed
hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x501
hub 1-0:1.0: port 1 not reset yet, waiting 50ms
ehci_hcd 0000:00:09.3: port 1 high speed
ehci_hcd 0000:00:09.3: GetStatus port 1 status 001005 POWER sig=se0 PE
CONNECT
usb 1-1: new high speed USB device using address 2
usb 1-1: new device strings: Mfr=73, Product=89, SerialNumber=109
usb 1-1: default language 0x0409
usb 1-1: Product: USB Storage Adapter
usb 1-1: Manufacturer: Hewlett-Packard
usb 1-1: SerialNumber: 0000000000024286
usb 1-1: hotplug
usb 1-1: adding 1-1:2.0 (config #2, interface 0)
usb 1-1:2.0: hotplug
usb-storage 1-1:2.0: usb_probe_interface
usb-storage 1-1:2.0: usb_probe_interface - got id
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: HP Model: DVD Writer 200j Rev: 1.72
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
USB Mass Storage device found at 2
uhci_hcd 0000:00:04.2: port 1 portsc 008a
hub 2-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
uhci_hcd 0000:00:04.2: port 2 portsc 009b
hub 2-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
uhci_hcd 0000:00:04.2: port 2 portsc 0099
uhci_hcd 0000:00:04.2: port 2 portsc 0099
uhci_hcd 0000:00:04.2: port 2 portsc 0099
uhci_hcd 0000:00:04.2: port 2 portsc 0099
uhci_hcd 0000:00:04.2: port 2 portsc 0099
hub 2-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101
usb 2-2: new full speed USB device using address 2
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: default language 0x0409
usb 2-2: Product: Generic USB Hub
usb 2-2: Manufacturer: ALCOR
usb 2-2: hotplug
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usb 2-2:1.0: hotplug
hub 2-2:1.0: usb_probe_interface
hub 2-2:1.0: usb_probe_interface - got id
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
hub 2-2:1.0: standalone hub
hub 2-2:1.0: ganged power switching
hub 2-2:1.0: global over-current protection
hub 2-2:1.0: power on to power good time: 44ms
hub 2-2:1.0: local power source is good
hub 2-2:1.0: no over-current condition exists
hub 2-2:1.0: enabling power on all ports
uhci_hcd 0000:00:04.2: port 1 portsc 0088
hub 2-0:1.0: port 1 enable change, status 00000100
hub 2-2:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
hub 2-2:1.0: debounce: port 2: delay 100ms stable 4 status 0x301
usb 2-2.2: new low speed USB device using address 3
usb 2-2.2: skipped 1 descriptor after interface
usb 2-2.2: new device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-2.2: default language 0x0409
usb 2-2.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 2-2.2: Manufacturer: Microsoft
usb 2-2.2: hotplug
usb 2-2.2: adding 2-2.2:1.0 (config #1, interface 0)
usb 2-2.2:1.0: hotplug
usbhid 2-2.2:1.0: usb_probe_interface
usbhid 2-2.2:1.0: usb_probe_interface - got id
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM)] on usb-0000:00:04.2-2.2
Adding 1564880k swap on /dev/hda9. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
To use my DVD writer, I have the following options compiled into the kernel:
SCSI CDROM
Enable vendor-specific extensions
Probe all LUNS
USB EHCI
Enforce bus bandwidth allocation
USB UHCI (for the USB controller on my motherboard and for USB 1.1
compatibility from my USB 2.0 card)
USB Mass-Storage support
ACPI is off.
PnP is off in my BIOS.
USB Legacy support is off in my BIOS.
^ permalink raw reply [flat|nested] 2+ messages in thread* Major problems with USB Mass-Storage device
@ 2004-08-13 23:44 Mike
0 siblings, 0 replies; 2+ messages in thread
From: Mike @ 2004-08-13 23:44 UTC (permalink / raw)
To: linux-kernel
Here are some additional errors. Again, I can read the DVD successfully
in a DVD-ROM drive.
Buffer I/O error on device sr0, logical block 2086686
Buffer I/O error on device sr0, logical block 2086687
Buffer I/O error on device sr0, logical block 2086688
Buffer I/O error on device sr0, logical block 2086689
Buffer I/O error on device sr0, logical block 2086690
Buffer I/O error on device sr0, logical block 2086691
Buffer I/O error on device sr0, logical block 2086692
Buffer I/O error on device sr0, logical block 2086693
Buffer I/O error on device sr0, logical block 2086694
Buffer I/O error on device sr0, logical block 2086695
Buffer I/O error on device sr0, logical block 2086696
Buffer I/O error on device sr0, logical block 2086697
Buffer I/O error on device sr0, logical block 2086698
Buffer I/O error on device sr0, logical block 2086699
Buffer I/O error on device sr0, logical block 2086700
Buffer I/O error on device sr0, logical block 2086701
Buffer I/O error on device sr0, logical block 2086702
Buffer I/O error on device sr0, logical block 2086703
Buffer I/O error on device sr0, logical block 2086704
Buffer I/O error on device sr0, logical block 2086705
Buffer I/O error on device sr0, logical block 2086706
Buffer I/O error on device sr0, logical block 2086707
Buffer I/O error on device sr0, logical block 2086708
Buffer I/O error on device sr0, logical block 2086709
Buffer I/O error on device sr0, logical block 2086710
Buffer I/O error on device sr0, logical block 2086711
Buffer I/O error on device sr0, logical block 2086712
Buffer I/O error on device sr0, logical block 2086713
Buffer I/O error on device sr0, logical block 2086714
Buffer I/O error on device sr0, logical block 2086715
Buffer I/O error on device sr0, logical block 2086716
Buffer I/O error on device sr0, logical block 2086717
Buffer I/O error on device sr0, logical block 2086718
Buffer I/O error on device sr0, logical block 2086719
Buffer I/O error on device sr0, logical block 2086720
Buffer I/O error on device sr0, logical block 2086721
Buffer I/O error on device sr0, logical block 2086722
Buffer I/O error on device sr0, logical block 2086723
Buffer I/O error on device sr0, logical block 2086724
Buffer I/O error on device sr0, logical block 2086725
Buffer I/O error on device sr0, logical block 2086726
Buffer I/O error on device sr0, logical block 2086727
Buffer I/O error on device sr0, logical block 2086728
Buffer I/O error on device sr0, logical block 2086729
Buffer I/O error on device sr0, logical block 2086730
Buffer I/O error on device sr0, logical block 2086731
Buffer I/O error on device sr0, logical block 2086732
Buffer I/O error on device sr0, logical block 2086733
Buffer I/O error on device sr0, logical block 2086734
Buffer I/O error on device sr0, logical block 2086735
Buffer I/O error on device sr0, logical block 2086736
Buffer I/O error on device sr0, logical block 2086737
Buffer I/O error on device sr0, logical block 2086686
Buffer I/O error on device sr0, logical block 2086687
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-08-13 23:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-08-13 23:37 Major problems with USB Mass-Storage device Mike
-- strict thread matches above, loose matches on Subject: below --
2004-08-13 23:44 Mike
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.