* RE: powernow-k8 won't load on Athlon64
@ 2004-08-24 16:08 paul.devriendt
2004-08-24 21:26 ` Ari Pollak
0 siblings, 1 reply; 16+ messages in thread
From: paul.devriendt @ 2004-08-24 16:08 UTC (permalink / raw)
To: ajp, cpufreq
> Trying to contact my motherboard manufacturer (MSI) about
> this gets me nowhere,
> it would probably be better if someone actually at AMD would
> deal with this.
Give me the board identification info (model number, revision, etc),
the processor identification info as best you can, and the BIOS
revision info, and I will pass it on. No guarantees that it will
be fixed, but I do have someone I can report it to.
Paul.
^ permalink raw reply [flat|nested] 16+ messages in thread
* RE: powernow-k8 won't load on Athlon64
2004-08-24 16:08 powernow-k8 won't load on Athlon64 paul.devriendt
@ 2004-08-24 21:26 ` Ari Pollak
0 siblings, 0 replies; 16+ messages in thread
From: Ari Pollak @ 2004-08-24 21:26 UTC (permalink / raw)
To: paul.devriendt; +Cc: cpufreq
Board Info:
- MSI K8T Neo-FSR, Rev. 1.0
- BIOS Rev.: 1.2
- AMD Athlon64 3000+
Thank you muchly for your help, it is very much appreciated.
> Give me the board identification info (model number, revision, etc),
> the processor identification info as best you can, and the BIOS
> revision info, and I will pass it on. No guarantees that it will
> be fixed, but I do have someone I can report it to.
>
> Paul.
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* RE: powernow-k8 won't load on Athlon64
@ 2004-08-24 16:21 paul.devriendt
2004-08-25 9:31 ` Bruno Ducrot
0 siblings, 1 reply; 16+ messages in thread
From: paul.devriendt @ 2004-08-24 16:21 UTC (permalink / raw)
To: ducrot, ajp; +Cc: cpufreq
> > Sure, it's up here: http://stuff.ebnj.net/acpidmp.out.bz2
>
> A (quick) decodage by hand show there is 3 P-states, which contains
> those settings:
>
> freq: 1600000 voltage 950
> freq: 1400000 voltage 950
> freq: 1200000 voltage 950
>
> Voltage don't change (weird), and all frequencies are below
> 1.6GHz, so there
> are all 'low'... Those values are indeed completely bogus..
> Complain to the bios writter (and ask Paul to give you some
> better tables
> for overriding purposes. He like to give them ;)
Thanks Bruno, I had pulled the file down but had not gotten
around to looking at it yet. Those values are not going to
work ... I am sticking with my guess of leftover K7 stuff.
AMD publishes the frequency/voltage info for Athlon64 ... you
do not need to ask me ;) It is on AMD's web site, in the Power
and Thermal Data Sheet, document number 30430.
Paul.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: powernow-k8 won't load on Athlon64
2004-08-24 16:21 paul.devriendt
@ 2004-08-25 9:31 ` Bruno Ducrot
2004-08-25 13:46 ` Ari Pollak
0 siblings, 1 reply; 16+ messages in thread
From: Bruno Ducrot @ 2004-08-25 9:31 UTC (permalink / raw)
To: paul.devriendt, ajp; +Cc: cpufreq
Hi,
On Tue, Aug 24, 2004 at 11:21:33AM -0500, paul.devriendt@amd.com wrote:
> > > Sure, it's up here: http://stuff.ebnj.net/acpidmp.out.bz2
> >
> > A (quick) decodage by hand show there is 3 P-states, which contains
> > those settings:
> >
> > freq: 1600000 voltage 950
> > freq: 1400000 voltage 950
> > freq: 1200000 voltage 950
Actually, the correct values are:
ACPI P-state 0
freq 1600 power 24040 latency 125 bus latency 6 control 0x06432308 status 0x00000308
freq: 1600000 voltage 1250
irt: 0 rvo 0 pllock 100 vidmvs 1 vstable 100
ACPI P-state 1
freq 1400 power 0 latency 125 bus latency 6 control 0x06432306 status 0x00000306
freq: 1400000 voltage 1250
irt: 0 rvo 0 pllock 100 vidmvs 1 vstable 100
ACPI P-state 2
freq 1200 power 18880 latency 125 bus latency 6 control 0x06432304 status 0x00000304
freq: 1200000 voltage 1250
irt: 0 rvo 0 pllock 100 vidmvs 1 vstable 100
sorry..
> >
> > Voltage don't change (weird), and all frequencies are below
> > 1.6GHz, so there
> > are all 'low'... Those values are indeed completely bogus..
> > Complain to the bios writter (and ask Paul to give you some
> > better tables
> > for overriding purposes. He like to give them ;)
> Thanks Bruno, I had pulled the file down but had not gotten
> around to looking at it yet. Those values are not going to
> work ... I am sticking with my guess of leftover K7 stuff.
>
> AMD publishes the frequency/voltage info for Athlon64 ... you
> do not need to ask me ;) It is on AMD's web site, in the Power
> and Thermal Data Sheet, document number 30430.
>
Ok.. I think then an override with the below patch is OK for the
amd64 3000+ (with 512ko L2 cache).
I'm not sure for this part (I've taken them from an ACPI DSDT):
data->irt = 3;
data->rvo = 2;
data->plllock = 2;
data->vidmvs = 1;
data->vstable = 5;
Paul, could you please confirm those values?
--- linux-2.6/arch/i386/kernel/cpu/cpufreq/powernow-k8.c 2004/08/24 13:49:16 1.1
+++ linux-2.6/arch/i386/kernel/cpu/cpufreq/powernow-k8.c 2004/08/25 11:01:56
@@ -47,6 +47,9 @@
static struct powernow_k8_data *powernow_data[NR_CPUS];
+
+#define OVERRIDE_MAX (3)
+
/* Return a frequency in MHz, given an input fid */
static u32 find_freq_from_fid(u32 fid)
{
@@ -794,6 +797,68 @@
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
#endif /* CONFIG_X86_POWERNOW_K8_ACPI */
+static int powernow_k8_cpu_init_override(struct powernow_k8_data *data)
+{
+ struct cpufreq_frequency_table *powernow_table;
+ u32 fid, vid;
+
+ /* fill in data->powernow_table */
+ powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
+ * (OVERRIDE_MAX + 1)), GFP_KERNEL);
+ if (!powernow_table) {
+ dprintk(KERN_ERR PFX "powernow_table memory alloc failure\n");
+ goto err_out;
+ }
+
+ /* 2000 GHz 1.50V */
+ fid = 0xc;
+ vid = 2;
+ dprintk(KERN_INFO PFX " %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
+ powernow_table[0].index = fid; /* lower 8 bits */
+ powernow_table[0].index |= (vid << 8); /* upper 8 bits */
+ powernow_table[0].frequency = find_khz_freq_from_fid(fid);
+
+ /* 1800 GHz 1.40V */
+ fid = 0xa;
+ vid = 6;
+ dprintk(KERN_INFO PFX " %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
+ powernow_table[1].index = fid; /* lower 8 bits */
+ powernow_table[1].index |= (vid << 8); /* upper 8 bits */
+ powernow_table[1].frequency = find_khz_freq_from_fid(fid);
+
+ /* 1000 GHz 1.10V */
+ fid = 0x2;
+ vid = 0x12;
+ dprintk(KERN_INFO PFX " %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
+ powernow_table[2].index = fid; /* lower 8 bits */
+ powernow_table[2].index |= (vid << 8); /* upper 8 bits */
+ powernow_table[2].frequency = find_khz_freq_from_fid(fid);
+
+ powernow_table[3].index = 0;
+ powernow_table[3].frequency = CPUFREQ_TABLE_END;
+
+ data->powernow_table = powernow_table;
+
+ /* fill in data */
+ data->numps = 3;
+ data->irt = 3;
+ data->rvo = 2;
+ data->plllock = 2;
+ data->vidmvs = 1;
+ data->vstable = 5;
+ data->acpi_data.state_count = 0;
+ print_basics(data);
+ return 0;
+
+err_out:
+ /*acpi_processor_unregister_performance(&data->acpi_data, data->cpu);*/
+
+ /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
+ data->acpi_data.state_count = 0;
+
+ return -ENODEV;
+}
+
/* Take a frequency, and issue the fid/vid transition command */
static int transition_frequency(struct powernow_k8_data *data, unsigned int index)
{
@@ -942,6 +1007,13 @@
data->cpu = pol->cpu;
+ if (powernow_k8_cpu_init_override(data)) {
+ printk(KERN_ERR PFX "Oops, can't override the powernow table for cpu %d\n", pol->cpu);
+ kfree(data);
+ return -ENODEV;
+ } else
+ goto the_next;
+
if (powernow_k8_cpu_init_acpi(data)) {
/*
* Use the PSB BIOS structure. This is only availabe on
@@ -964,6 +1036,7 @@
return -ENODEV;
}
}
+the_next:
/* only run on specific CPU from here on */
oldmask = current->cpus_allowed;
Cheers,
--
Bruno Ducrot
-- Which is worse: ignorance or apathy?
-- Don't know. Don't care.
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: powernow-k8 won't load on Athlon64
2004-08-25 9:31 ` Bruno Ducrot
@ 2004-08-25 13:46 ` Ari Pollak
2004-08-25 14:50 ` Bruno Ducrot
0 siblings, 1 reply; 16+ messages in thread
From: Ari Pollak @ 2004-08-25 13:46 UTC (permalink / raw)
To: cpufreq
Thanks! I just tried this patch out and it seems to work properly:
ACPI: Processor [CPU1] (supports C1)
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV)
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
powernow-k8: cpu_init done, current fid 0xc, vid 0x2
Unfortunately, bumping the CPU speed down to 1 GHz doesn't seem to make
the CPU run any cooler or the CPU fan run any slower :(
>
> --- linux-2.6/arch/i386/kernel/cpu/cpufreq/powernow-k8.c 2004/08/24 13:49:16 1.1
> +++ linux-2.6/arch/i386/kernel/cpu/cpufreq/powernow-k8.c 2004/08/25 11:01:56
> @@ -47,6 +47,9 @@
>
> static struct powernow_k8_data *powernow_data[NR_CPUS];
>
> +
> +#define OVERRIDE_MAX (3)
> +
> /* Return a frequency in MHz, given an input fid */
> static u32 find_freq_from_fid(u32 fid)
> {
> @@ -794,6 +797,68 @@
> static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
> #endif /* CONFIG_X86_POWERNOW_K8_ACPI */
>
> +static int powernow_k8_cpu_init_override(struct powernow_k8_data *data)
> +{
> + struct cpufreq_frequency_table *powernow_table;
> + u32 fid, vid;
> +
> + /* fill in data->powernow_table */
> + powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
> + * (OVERRIDE_MAX + 1)), GFP_KERNEL);
> + if (!powernow_table) {
> + dprintk(KERN_ERR PFX "powernow_table memory alloc failure\n");
> + goto err_out;
> + }
> +
> + /* 2000 GHz 1.50V */
> + fid = 0xc;
> + vid = 2;
> + dprintk(KERN_INFO PFX " %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
> + powernow_table[0].index = fid; /* lower 8 bits */
> + powernow_table[0].index |= (vid << 8); /* upper 8 bits */
> + powernow_table[0].frequency = find_khz_freq_from_fid(fid);
> +
> + /* 1800 GHz 1.40V */
> + fid = 0xa;
> + vid = 6;
> + dprintk(KERN_INFO PFX " %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
> + powernow_table[1].index = fid; /* lower 8 bits */
> + powernow_table[1].index |= (vid << 8); /* upper 8 bits */
> + powernow_table[1].frequency = find_khz_freq_from_fid(fid);
> +
> + /* 1000 GHz 1.10V */
> + fid = 0x2;
> + vid = 0x12;
> + dprintk(KERN_INFO PFX " %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
> + powernow_table[2].index = fid; /* lower 8 bits */
> + powernow_table[2].index |= (vid << 8); /* upper 8 bits */
> + powernow_table[2].frequency = find_khz_freq_from_fid(fid);
> +
> + powernow_table[3].index = 0;
> + powernow_table[3].frequency = CPUFREQ_TABLE_END;
> +
> + data->powernow_table = powernow_table;
> +
> + /* fill in data */
> + data->numps = 3;
> + data->irt = 3;
> + data->rvo = 2;
> + data->plllock = 2;
> + data->vidmvs = 1;
> + data->vstable = 5;
> + data->acpi_data.state_count = 0;
> + print_basics(data);
> + return 0;
> +
> +err_out:
> + /*acpi_processor_unregister_performance(&data->acpi_data, data->cpu);*/
> +
> + /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
> + data->acpi_data.state_count = 0;
> +
> + return -ENODEV;
> +}
> +
> /* Take a frequency, and issue the fid/vid transition command */
> static int transition_frequency(struct powernow_k8_data *data, unsigned int index)
> {
> @@ -942,6 +1007,13 @@
>
> data->cpu = pol->cpu;
>
> + if (powernow_k8_cpu_init_override(data)) {
> + printk(KERN_ERR PFX "Oops, can't override the powernow table for cpu %d\n", pol->cpu);
> + kfree(data);
> + return -ENODEV;
> + } else
> + goto the_next;
> +
> if (powernow_k8_cpu_init_acpi(data)) {
> /*
> * Use the PSB BIOS structure. This is only availabe on
> @@ -964,6 +1036,7 @@
> return -ENODEV;
> }
> }
> +the_next:
>
> /* only run on specific CPU from here on */
> oldmask = current->cpus_allowed;
>
>
>
>
> Cheers,
>
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: powernow-k8 won't load on Athlon64
2004-08-25 13:46 ` Ari Pollak
@ 2004-08-25 14:50 ` Bruno Ducrot
2004-08-25 14:54 ` Ari Pollak
0 siblings, 1 reply; 16+ messages in thread
From: Bruno Ducrot @ 2004-08-25 14:50 UTC (permalink / raw)
To: Ari Pollak; +Cc: cpufreq
Hi,
On Wed, Aug 25, 2004 at 09:46:42AM -0400, Ari Pollak wrote:
> Thanks! I just tried this patch out and it seems to work properly:
> ACPI: Processor [CPU1] (supports C1)
> powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b)
> powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV)
> powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
> powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
> powernow-k8: cpu_init done, current fid 0xc, vid 0x2
>
> Unfortunately, bumping the CPU speed down to 1 GHz doesn't seem to make
> the CPU run any cooler or the CPU fan run any slower :(
Could you please run 'bogomips' in order to check that at least the cpu
is slower? (on debian, it's just apt-get install sysutils, for other
systems, I must admit I don't know).
--
Bruno Ducrot
-- Which is worse: ignorance or apathy?
-- Don't know. Don't care.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: powernow-k8 won't load on Athlon64
2004-08-25 14:50 ` Bruno Ducrot
@ 2004-08-25 14:54 ` Ari Pollak
0 siblings, 0 replies; 16+ messages in thread
From: Ari Pollak @ 2004-08-25 14:54 UTC (permalink / raw)
To: Bruno Ducrot; +Cc: cpufreq
Yes, it is definitely running slower.
% bogomips
Calibrating delay loop.. ok - 976.00 BogoMips
% cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 12
model name : AMD Athlon(tm) 64 Processor 3000+
stepping : 0
cpu MHz : 1000.513
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm
3dnowext 3dnow
bogomips : 1970.17
Bruno Ducrot wrote:
> Could you please run 'bogomips' in order to check that at least the cpu
> is slower? (on debian, it's just apt-get install sysutils, for other
> systems, I must admit I don't know).
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* RE: powernow-k8 won't load on Athlon64
@ 2004-08-23 16:55 paul.devriendt
2004-08-24 15:36 ` Bruno Ducrot
0 siblings, 1 reply; 16+ messages in thread
From: paul.devriendt @ 2004-08-23 16:55 UTC (permalink / raw)
To: ducrot, ajp; +Cc: cpufreq
> Here, the powernow-k8 driver complains there is too many low
> frequencies. This come from ACPI stuff in powernow-k8.
The AMD driver does not allow you to have multiple low
frequencies. The complication is that the hardware can not
transition from a low frequency (<=1.4GHz) to another low
frequency - it has to switch to a high frequency (>=1.6GHz)
as an interim step.
It would be a trivial hack to change the driver to ignore
such multiple entries instead of giving a fatal error. It
already ignores bogus entries of -1 so that code path is
there.
I thought I saw a post from Pavel that he had a modified version
of the driver that did implement low-low transition.
> > powernow-k8: BIOS error: PSB table is not v1.4
>
> Here, after falling back to the PSB/PST method, it complain about the
> wrong version of the PSB table.
>
> There is very likely a BIOS trouble, though I would expected that this
> work after a patch from Paul?
From previous such problems I have looked at, the BIOS writers left
the old K7 tables in the BIOS when they implemented the K8 support.
That may or may not be the case here. I suggest the best way forward
is to ignore this (or report it to the machine vendor as a broken
BIOS) and get the ACPI stuff working.
Paul.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: powernow-k8 won't load on Athlon64
2004-08-23 16:55 paul.devriendt
@ 2004-08-24 15:36 ` Bruno Ducrot
0 siblings, 0 replies; 16+ messages in thread
From: Bruno Ducrot @ 2004-08-24 15:36 UTC (permalink / raw)
To: paul.devriendt; +Cc: ajp, cpufreq
Hi Paul,
On Mon, Aug 23, 2004 at 11:55:41AM -0500, paul.devriendt@amd.com wrote:
> >From previous such problems I have looked at, the BIOS writers left
> the old K7 tables in the BIOS when they implemented the K8 support.
> That may or may not be the case here. I suggest the best way forward
> is to ignore this (or report it to the machine vendor as a broken
> BIOS) and get the ACPI stuff working.
>
At least for the ACPI stuff, sound like there is a kind of mix of the
two.. Some fields specific to the k8 seems to be filled though
they should be zeroed for k7 (I've not throughfully verified, but the
fact that vid are somehow constants remind me cool'n quiet for the
athlon-xp). I guess someone from AMD should warn them (hint hint ;)
Cheers,
--
Bruno Ducrot
-- Which is worse: ignorance or apathy?
-- Don't know. Don't care.
^ permalink raw reply [flat|nested] 16+ messages in thread
* powernow-k8 won't load on Athlon64
@ 2004-08-19 16:19 Ari Pollak
2004-08-19 19:39 ` Dave Jones
2004-08-23 15:46 ` Bruno Ducrot
0 siblings, 2 replies; 16+ messages in thread
From: Ari Pollak @ 2004-08-19 16:19 UTC (permalink / raw)
To: cpufreq
[-- Attachment #1: Type: text/plain, Size: 3780 bytes --]
Hi there.. I'm trying to load the powernow-k8 module under kernel
2.6.8.1 built for i386/Athlon64, but it won't load. I get the following
kernel messages instead:
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b)
powernow-k8: Too many lo freq table entries
powernow-k8: BIOS error: PSB table is not v1.4
FATAL: Error inserting powernow_k8
(/lib/modules/2.6.8.1/kernel/arch/i386/kernel/cpu/cpufreq/powernow-k8.ko):
No such device
Trying to load the "acpi" cpufreq driver just results in the "no such
device" error.
This is an AMD Athlon64 3000+, on an MSI K8T Neo-FSR. Here is my
/proc/cpuinfo, the output of lsmod, and attached is my kernel .config.
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 12
model name : AMD Athlon(tm) 64 Processor 3000+
stepping : 0
cpu MHz : 2001.027
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm
3dnowext 3dnow
bogomips : 3940.35
Module Size Used by
processor 17392 0
freq_table 4292 0
i2c_isa 2048 0
fan 4044 0
ac 4876 0
button 6360 0
nfsd 99272 3
exportfs 6400 1 nfsd
parport_pc 39680 1
lp 10536 0
parport 41032 2 parport_pc,lp
ipt_MASQUERADE 4032 2
ipt_limit 2560 1
ipt_state 2112 13
iptable_filter 2944 1
ip_conntrack_irc 71472 0
ip_nat_ftp 5104 0
iptable_nat 25132 3 ipt_MASQUERADE,ip_nat_ftp
ip_tables 18176 5
ipt_MASQUERADE,ipt_limit,ipt_state,iptable_filter,iptable_nat
ip_conntrack_ftp 72240 1 ip_nat_ftp
ip_conntrack 35144 6
ipt_MASQUERADE,ipt_state,ip_conntrack_irc,ip_nat_ftp,iptable_nat,ip_conntrack_ftp
visor 18128 0
usbserial 28008 1 visor
usb_storage 30464 0
snd_via82xx 28740 0
snd_ac97_codec 69572 1 snd_via82xx
snd_pcm_oss 54248 0
snd_mixer_oss 19904 1 snd_pcm_oss
snd_pcm 97352 2 snd_via82xx,snd_pcm_oss
snd_timer 25540 1 snd_pcm
snd_page_alloc 11720 2 snd_via82xx,snd_pcm
snd_mpu401_uart 8000 1 snd_via82xx
snd_rawmidi 24996 1 snd_mpu401_uart
snd_seq_device 8264 1 snd_rawmidi
snd 54820 9
snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 10016 1 snd
uhci_hcd 32656 0
usbcore 117668 6 visor,usbserial,usb_storage,uhci_hcd
sata_via 7492 0
libata 40708 1 sata_via
r8169 17476 0
crc32 4352 1 r8169
evdev 9344 0
cpufreq_powersave 1792 0
cpufreq_userspace 5336 0
radeon 130532 2
via_agp 9088 0
agpgart 34472 1 via_agp
3c59x 38760 0
binfmt_misc 11656 1
sd_mod 18944 0
scsi_mod 83072 3 usb_storage,libata,sd_mod
w83627hf 29060 0
eeprom 7624 0
i2c_sensor 2944 2 w83627hf,eeprom
i2c_dev 9984 0
i2c_viapro 7116 0
i2c_core 24144 6
i2c_isa,w83627hf,eeprom,i2c_sensor,i2c_dev,i2c_viapro
rtc 12664 0
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 30536 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
# CONFIG_X86_UP_IOAPIC is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_PROC_INTF is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_CPU_FREQ_TABLE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_MEGARAID is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
CONFIG_SCSI_SATA_VIA=m
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_TFTP is not set
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_PHYSDEV is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_UINPUT=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
CONFIG_AGP_AMD=m
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83627HF=m
#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
#
# Logo configuration
#
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
CONFIG_SND_USB_AUDIO=m
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
CONFIG_USB_OV511=m
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_TIGL=m
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
[-- Attachment #3: Type: text/plain, Size: 143 bytes --]
_______________________________________________
Cpufreq mailing list
Cpufreq@www.linux.org.uk
http://www.linux.org.uk/mailman/listinfo/cpufreq
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: powernow-k8 won't load on Athlon64
2004-08-19 16:19 Ari Pollak
@ 2004-08-19 19:39 ` Dave Jones
2004-08-19 19:53 ` Ari Pollak
2004-08-23 15:46 ` Bruno Ducrot
1 sibling, 1 reply; 16+ messages in thread
From: Dave Jones @ 2004-08-19 19:39 UTC (permalink / raw)
To: Ari Pollak; +Cc: cpufreq
On Thu, Aug 19, 2004 at 12:19:32PM -0400, Ari Pollak wrote:
> Hi there.. I'm trying to load the powernow-k8 module under kernel
> 2.6.8.1 built for i386/Athlon64, but it won't load. I get the following
> kernel messages instead:
> powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b)
> powernow-k8: Too many lo freq table entries
> powernow-k8: BIOS error: PSB table is not v1.4
> FATAL: Error inserting powernow_k8
> (/lib/modules/2.6.8.1/kernel/arch/i386/kernel/cpu/cpufreq/powernow-k8.ko):
> No such device
There's quite a backlog of cpufreq bits pending which are due to be
merged hopefully next week. (Linus is on vacation right now)
Can you try http://www.codemonkey.org.uk/projects/cpufreq/daily-snapshots/cpufreq-2004-08-19.diff
and see if that fixes it for you ? (I think it will)
Dave
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: powernow-k8 won't load on Athlon64
2004-08-19 16:19 Ari Pollak
2004-08-19 19:39 ` Dave Jones
@ 2004-08-23 15:46 ` Bruno Ducrot
2004-08-23 16:45 ` Ari Pollak
1 sibling, 1 reply; 16+ messages in thread
From: Bruno Ducrot @ 2004-08-23 15:46 UTC (permalink / raw)
To: Ari Pollak; +Cc: cpufreq
Hi,
On Thu, Aug 19, 2004 at 12:19:32PM -0400, Ari Pollak wrote:
> Hi there.. I'm trying to load the powernow-k8 module under kernel
> 2.6.8.1 built for i386/Athlon64, but it won't load. I get the following
> kernel messages instead:
> powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b)
> powernow-k8: Too many lo freq table entries
Here, the powernow-k8 driver complains there is too many low
frequencies. This come from ACPI stuff in powernow-k8.
> powernow-k8: BIOS error: PSB table is not v1.4
Here, after falling back to the PSB/PST method, it complain about the
wrong version of the PSB table.
There is very likely a BIOS trouble, though I would expected that this
work after a patch from Paul? Strange. Could you please send me a
dump of teh ACPI tables, please, via:
wget ftp://ftp.kernel.org//pub/linux/kernel/people/lenb/acpi/utils/pmtools-20031210.tar.bz2
tar xjvfp pmtools-20031210.tar.bz2
cd pmtools-20031210/acpidmp
make
sudo ./acpidmp > acpidmp.out
bzip2 acpidmp.out
Then could you mail me (privately) or better give us a link to this
acpidmp.out.bz2?
Cheers,
--
Bruno Ducrot
-- Which is worse: ignorance or apathy?
-- Don't know. Don't care.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: powernow-k8 won't load on Athlon64
2004-08-23 15:46 ` Bruno Ducrot
@ 2004-08-23 16:45 ` Ari Pollak
2004-08-24 14:35 ` Bruno Ducrot
0 siblings, 1 reply; 16+ messages in thread
From: Ari Pollak @ 2004-08-23 16:45 UTC (permalink / raw)
To: cpufreq
Bruno Ducrot <ducrot <at> poupinou.org> writes:
> Then could you mail me (privately) or better give us a link to this
> acpidmp.out.bz2?
Sure, it's up here: http://stuff.ebnj.net/acpidmp.out.bz2
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: powernow-k8 won't load on Athlon64
2004-08-23 16:45 ` Ari Pollak
@ 2004-08-24 14:35 ` Bruno Ducrot
2004-08-24 14:41 ` Ari Pollak
0 siblings, 1 reply; 16+ messages in thread
From: Bruno Ducrot @ 2004-08-24 14:35 UTC (permalink / raw)
To: Ari Pollak; +Cc: cpufreq
Hi,
On Mon, Aug 23, 2004 at 04:45:36PM +0000, Ari Pollak wrote:
> Bruno Ducrot <ducrot <at> poupinou.org> writes:
> > Then could you mail me (privately) or better give us a link to this
> > acpidmp.out.bz2?
>
> Sure, it's up here: http://stuff.ebnj.net/acpidmp.out.bz2
A (quick) decodage by hand show there is 3 P-states, which contains
those settings:
freq: 1600000 voltage 950
freq: 1400000 voltage 950
freq: 1200000 voltage 950
Voltage don't change (weird), and all frequencies are below 1.6GHz, so there
are all 'low'... Those values are indeed completely bogus..
Complain to the bios writter (and ask Paul to give you some better tables
for overriding purposes. He like to give them ;)
Cheers,
--
Bruno Ducrot
-- Which is worse: ignorance or apathy?
-- Don't know. Don't care.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: powernow-k8 won't load on Athlon64
2004-08-24 14:35 ` Bruno Ducrot
@ 2004-08-24 14:41 ` Ari Pollak
0 siblings, 0 replies; 16+ messages in thread
From: Ari Pollak @ 2004-08-24 14:41 UTC (permalink / raw)
To: cpufreq
> Voltage don't change (weird), and all frequencies are below 1.6GHz, so there
> are all 'low'... Those values are indeed completely bogus..
> Complain to the bios writter (and ask Paul to give you some better tables
> for overriding purposes. He like to give them ;)
Trying to contact my motherboard manufacturer (MSI) about this gets me nowhere,
it would probably be better if someone actually at AMD would deal with this.
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2004-08-25 14:54 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-08-24 16:08 powernow-k8 won't load on Athlon64 paul.devriendt
2004-08-24 21:26 ` Ari Pollak
-- strict thread matches above, loose matches on Subject: below --
2004-08-24 16:21 paul.devriendt
2004-08-25 9:31 ` Bruno Ducrot
2004-08-25 13:46 ` Ari Pollak
2004-08-25 14:50 ` Bruno Ducrot
2004-08-25 14:54 ` Ari Pollak
2004-08-23 16:55 paul.devriendt
2004-08-24 15:36 ` Bruno Ducrot
2004-08-19 16:19 Ari Pollak
2004-08-19 19:39 ` Dave Jones
2004-08-19 19:53 ` Ari Pollak
2004-08-23 15:46 ` Bruno Ducrot
2004-08-23 16:45 ` Ari Pollak
2004-08-24 14:35 ` Bruno Ducrot
2004-08-24 14:41 ` Ari Pollak
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.