[LARTC] shaping problems

[LARTC] shaping problems

[nix4me]

Hi,
 
I am using the following script to limit my outbound traffic.  This 
scipt runs on a box behind my firewall.  It limits my outbound passive 
ftp traffic to 39K perfectly....just like  i want.  However, i just 
noticed that it is also limiting uploads coming to my server.
 
Is there something I can change to make it not limit uploads to my server?
#!/bin/bash
#shaping passive ftp traffic

# mark the outbound passive ftp packets on ports 50000-51000
iptables -t mangle -D POSTROUTING -o eth0 -j MYSHAPER-OUT 2> /dev/null > 
/dev/null
iptables -t mangle -F MYSHAPER-OUT 2> /dev/null > /dev/null
iptables -t mangle -X MYSHAPER-OUT 2> /dev/null > /dev/null
 
iptables -t mangle -N MYSHAPER-OUT
iptables -t mangle -I POSTROUTING -o eth0 -j MYSHAPER-OUT

iptables -t mangle -A MYSHAPER-OUT -p tcp --sport 65437 -j MARK 
--set-mark 20
iptables -t mangle -A MYSHAPER-OUT -p tcp --sport 50000:51000 -j MARK 
--set-mark 20
#iptables -t mangle -A MYSHAPER-OUT -p tcp --dport 50000:65437 -j MARK 
--set-mark 20
iptables -t mangle -A MYSHAPER-OUT -m mark --mark 0 -j MARK --set-mark 26
# clear it
tc qdisc del dev eth0 root

#add the root qdisk
tc qdisc add dev eth0 root handle 1: htb default 26

#add main rate limit class
tc class add dev eth0 parent 1: classid 1:1 htb rate 10000mbps

#add leaf classes
tc class add dev eth0 parent 1:1 classid 1:26 htb rate 10000mbps
tc class add dev eth0 parent 1:1 classid 1:20 htb rate 39kbps

#filter traffic into classes
tc filter add dev eth0 parent 1:0  prio 0 protocol ip handle 20 fw 
flowid 1:20
tc filter add dev eth0 parent 1:0  prio 0 protocol ip handle 26 fw 
flowid 1:26

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/