[U-Boot-Users] uboot and serial console on innovator

[U-Boot-Users] uboot and serial console on innovator

[Jeffery Huang]

Dear All,
     I have build a u-boot for innovator 1510 and boot succesful on the 
board via serial console-COM1 output.  Does it possible using COM2 on 
innovator to output message? Does their anyone can tell me how do I do 
for this issue?

Thanks.

Regard,
Jeffery Huang

[U-Boot-Users] uboot and serial console on innovator

[Wolfgang Denk]

In message <412F008D.3020101@autotools.com.tw> you wrote:
>
>      I have build a u-boot for innovator 1510 and boot succesful on the 
> board via serial console-COM1 output.  Does it possible using COM2 on 
> innovator to output message? Does their anyone can tell me how do I do 
> for this issue?

Yes, this is possible, but not out of the box.

You will have to modify the driver to support multiple serial  inter-
faces; see doc/README.serial_multi .

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
For every problem there is one solution which is  simple,  neat,  and
wrong.                                                - H. L. Mencken