* Re: strange softdog message on 2.4.20 kernel...
2004-08-23 16:51 strange softdog message on 2.4.20 kernel Matthew Qvapul
@ 2004-08-23 16:16 ` Alan Cox
2004-08-23 17:32 ` Matthew Qvapul
0 siblings, 1 reply; 4+ messages in thread
From: Alan Cox @ 2004-08-23 16:16 UTC (permalink / raw)
To: Matthew Qvapul; +Cc: Linux Kernel Mailing List
On Llu, 2004-08-23 at 17:51, Matthew Qvapul wrote:
> 2) /sbin/modprobe softdog soft_margin=900
> 3) grep "adg" > /dev/watchdog
>
> SOFTDOG: WDT device closed unexpectedly. WDT will not stop!
You closed it without indicating you meant to close it so the timer
decided the watchdog daemon had died. Thats configurable when
building the kernel (NOWAYOUT option)
Alan
^ permalink raw reply [flat|nested] 4+ messages in thread
* strange softdog message on 2.4.20 kernel...
@ 2004-08-23 16:51 Matthew Qvapul
2004-08-23 16:16 ` Alan Cox
0 siblings, 1 reply; 4+ messages in thread
From: Matthew Qvapul @ 2004-08-23 16:51 UTC (permalink / raw)
To: linux-kernel
Hallo
I have a strange problem with wdt/softdog mechanism on my mashine
`uname -a`:
Linux pikpok2 2.4.20-28.7 #1 Thu Dec 18 11:23:36 EST 2003 i686
unknown
while performing the following operations I get the message which
is at the end of commands sequence:
1) /bin/mknod /dev/watchdog c 10 130
2) /sbin/modprobe softdog soft_margin=900
3) grep "adg" > /dev/watchdog
SOFTDOG: WDT device closed unexpectedly. WDT will not stop!
what is strange I did exactly the same thing on my friend's
mashine, `uname -a`:
Linux klif 2.4.18-18.7.x.a1smp #1 SMP Mon Nov 25 17:39:43 CET
2002 i686 unknown
and there was no message.
what is more, while performing this on my mashine (2.4.20..) , it
reset after some time ( maybe it was 900 secs ). I think this
this was the reason.
I tried it a few times ( together with opening /dev/watchdog file
with emacs ) and I also caused kernel panic :(
some more info about my mashine. Mayebe it'll be helphul:
[4.] Kernel version (from /proc/version):
Linux version 2.4.20-28.7 (bhcompile@bugs.devel.redhat.com) (gcc
version 2.96 20
000731 (Red Hat Linux 7.3 2.96-126)) #1 Thu Dec 18 11:23:36 EST 2003
[7.] Environment
BASH=/bin/bash
BASH_ENV=/root/.bashrc
BASH_VERSINFO=([0]="2" [1]="05a" [2]="0" [3]="1" [4]="release"
[5]="i686-pc-linux-gnu")
BASH_VERSION='2.05a.0(1)-release'
COLORS=/etc/DIR_COLORS
COLORTERM=
COLUMNS=80
DIRSTACK=()
DISPLAY=:0.0
EUID=0
GROUPS=()
GS_LIB=/root/.kde/share/fonts
GTK_RC_FILES=/etc/gtk/gtkrc:/root/.gtkrc:/root/.gtkrc-kde
HISTFILE=/root/.bash_history
HISTFILESIZE=1000
HISTSIZE=1000
HOME=/root
HOSTNAME=pikpok2
HOSTTYPE=i686
IFS=$' \t\n'
INPUTRC=/etc/inputrc
KDE_MULTIHEAD=false
KONSOLE_DCOP='DCOPRef(konsole-1414,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1414,session-1)'
LANG=en_US.iso885915
LESSOPEN='|/usr/bin/lesspipe.sh %s'
LINES=40
LOGNAME=root
LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:'
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/root
MAILCHECK=60
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/usr/local/sbin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/root/bin
PIPESTATUS=([0]="0")
PPID=1414
PROMPT_COMMAND='echo -ne
"\033]0;${USER}@${HOSTNAME%%.*}:${PWD/$HOME/~}\007"'
PS1='[\u@\h \W]\$ '
PS2='> '
PS4='+ '
PWD=/root
QTDIR=/usr/lib/qt3-gcc2.96
SESSION_MANAGER=local/pikpok2:/tmp/.ICE-unix/1362
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:histexpand:monitor:history:interactive-comments:emacs
SHLVL=3
SUPPORTED=en_US.iso885915:en_US:en
TERM=xterm
UID=0
USER=root
USERNAME=root
XDM_MANAGED=/var/run/xdmctl/xdmctl-:0,maysd,mayfn,sched
XMODIFIERS=@im=none
_=
i=/etc/profile.d/which-2.sh
langfile=/root/.i18n
[7.1.] redhat version
Red Hat Linux release 7.3 (Valhalla)
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 501.140
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat pse36 mmx fxsr sse
bogomips : 999.42
[7.3.] Module information (from /proc/modules):
nls_iso8859-1 3456 1 (autoclean)
nls_cp437 5088 1 (autoclean)
vfat 11484 1 (autoclean)
fat 35992 0 (autoclean) [vfat]
es1371 29856 1 (autoclean)
gameport 3312 0 (autoclean) [es1371]
ac97_codec 13184 0 (autoclean) [es1371]
soundcore 6212 4 (autoclean) [es1371]
agpgart 43520 0 (unused)
autofs 11588 0 (autoclean) (unused)
3c59x 27464 1
ide-cd 31616 0 (autoclean)
cdrom 33152 0 (autoclean) [ide-cd]
usb-uhci 23620 0 (unused)
usbcore 71680 1 [usb-uhci]
ext3 63328 2
jbd 45740 2 [ext3]
[7.4.] Loaded driver and hardware information (/proc/ioports,
/proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
9000-9fff : PCI Bus #01
9000-90ff : ATI Technologies Inc Rage 128 RF/SG AGP
a000-a07f : 3Com Corporation 3cSOHO100-TX Hurricane
a000-a07f : 02:04.0
a400-a43f : Ensoniq 5880 AudioPCI
a400-a43f : es1371
b000-b01f : Intel Corp. 82801AA USB
b000-b01f : usb-uhci
f000-f00f : Intel Corp. 82801AA IDE
f000-f007 : ide0
f008-f00f : ide1
iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1fffffff : System RAM
00100000-00226219 : Kernel code
0022621a-0031f71f : Kernel data
d0000000-d3ffffff : Intel Corp. 82815 815 Chipset Host Bridge and
Memory Controller Hub
d4000000-d7ffffff : PCI Bus #01
d4000000-d7ffffff : ATI Technologies Inc Rage 128 RF/SG AGP
d8000000-d9ffffff : PCI Bus #01
d9000000-d9003fff : ATI Technologies Inc Rage 128 RF/SG AGP
db000000-db00007f : 3Com Corporation 3cSOHO100-TX Hurricane
ffb00000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge
and Memory Controller Hub (rev 02)
Subsystem: Intel Corp. 82815 815 Chipset Host Bridge and Memory
Controller Hub
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [88] #09 [f104]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev
02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: d4000000-d7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: da000000-dbffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) (prog-if
80 [Master])
Subsystem: Intel Corp. 82801AA IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at f000 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) (prog-if
00 [UHCI])
Subsystem: Intel Corp. 82801AA USB
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at b000 [size=32]
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128
RF/SG AGP (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Magnum/Xpert128/X99/Xpert2000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at d9000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:04.0 Ethernet controller: 3Com Corporation 3cSOHO100-TX
Hurricane (rev 30)
Subsystem: 3Com Corporation 3cSOHO100-TX Hurricane
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a000 [size=128]
Region 1: Memory at db000000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:05.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 04)
Subsystem: Ensoniq: Unknown device 8001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort+ <MAbort+ >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at a400 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
the system is freshly installed and that problem also occured on
my previous RH9.0 with the newest kernel updated.
greetings
pikpus
----------------------------------------------------
Chcesz na bieżąco otrzymywać informacje z Olimpiady?
Zanim zdąży je podać radio, telewizja lub prasa?!
-->> Zaprenumeruj za darmo przez wpkontakt! ---> Kliknij:
http://klik.wp.pl/?adr=http%3A%2F%2Fwpkontakt.wp.pl%2Fkanaly.html%23ksport&sid=229
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: strange softdog message on 2.4.20 kernel...
2004-08-23 17:32 ` Matthew Qvapul
@ 2004-08-23 17:08 ` Alan Cox
0 siblings, 0 replies; 4+ messages in thread
From: Alan Cox @ 2004-08-23 17:08 UTC (permalink / raw)
To: Matthew Qvapul; +Cc: Linux Kernel Mailing List
On Llu, 2004-08-23 at 18:32, Matthew Qvapul wrote:
> So probably it means that redhat changed kernel configuration
> kernel between versions 2.4.18 and 2.4.20.
>
> Do You approve the fact that my mashine was rebooted because of
> such kernel config ?
Good to know it works properly. I'd have to dig back but I think what
actually probably occurred is that 2.4.18 to 2.4.20 was the great
watchdog driver clean up when various drivers lacking "NOWAYOUT" support
got fixed properly upstream and a whole pile of other API variances got
cleaned up and resolved.
Alan
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: strange softdog message on 2.4.20 kernel...
2004-08-23 16:16 ` Alan Cox
@ 2004-08-23 17:32 ` Matthew Qvapul
2004-08-23 17:08 ` Alan Cox
0 siblings, 1 reply; 4+ messages in thread
From: Matthew Qvapul @ 2004-08-23 17:32 UTC (permalink / raw)
To: Alan Cox; +Cc: Linux Kernel Mailing List
So probably it means that redhat changed kernel configuration
kernel between versions 2.4.18 and 2.4.20.
Do You approve the fact that my mashine was rebooted because of
such kernel config ?
Greetings
pikpus
Dnia 23-08-2004 o godz. 18:16 Alan Cox napisał(a):
> On Llu, 2004-08-23 at 17:51, Matthew Qvapul wrote:
> > 2) /sbin/modprobe softdog soft_margin=900
> > 3) grep "adg" > /dev/watchdog
> >
> > SOFTDOG: WDT device closed unexpectedly. WDT will not stop!
>
> You closed it without indicating you meant to close it so the timer
> decided the watchdog daemon had died. Thats configurable when
> building the kernel (NOWAYOUT option)
>
> Alan
>
>
----------------------------------------------------
Olimpiada na skuterze!
Skutery, aparaty cyfrowe, oryginalne plecaki olimpijskie
czekają na chętnych! ---> Ateny.wp.pl/Konkurs ---> Sprawdź się!
http://klik.wp.pl/?adr=http%3A%2F%2Fateny.wp.pl%2Fkonkurs&sid=226
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2004-08-23 18:10 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-08-23 16:51 strange softdog message on 2.4.20 kernel Matthew Qvapul
2004-08-23 16:16 ` Alan Cox
2004-08-23 17:32 ` Matthew Qvapul
2004-08-23 17:08 ` Alan Cox
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.