From: Carlos Limarino <climarino@yahoo.com.ar>
To: video4linux-list@redhat.com
Subject: Re: Help needed to add support for the card Compro VideoMate X50 (CX88/XC2028)
Date: Sun, 17 Aug 2008 10:20:48 -0700 (PDT) [thread overview]
Message-ID: <413360.56066.qm@web34501.mail.mud.yahoo.com> (raw)
In-Reply-To: <474079.21637.qm@web34503.mail.mud.yahoo.com>
I have more information.
This is the dump of 'RegSpy.exe', a Win32 program that lists the registers of CX88 based cards.
CX2388x Card [0]:
Vendor ID: 0x14f1
Device ID: 0x8800
Subsystem ID: 0xe000185b
=================================================================================
CX2388x Card - Register Dump:
AUD_INIT: 00000001 (00000000 00000000 00000000 00000001)
AUD_INIT_LD: 00000001 (00000000 00000000 00000000 00000001)
AUD_SOFT_RESET: 00000000 (00000000 00000000 00000000 00000000)
AUD_I2SINPUTCNTL: 00000004 (00000000 00000000 00000000 00000100)
AUD_BAUDRATE: 00000000 (00000000 00000000 00000000 00000000)
AUD_I2SOUTPUTCNTL: 00000000 (00000000 00000000 00000000 00000000)
AAGC_HYST: 0000001a (00000000 00000000 00000000 00011010)
AAGC_GAIN: 00000000 (00000000 00000000 00000000 00000000)
AAGC_DEF: 00000000 (00000000 00000000 00000000 00000000)
AUD_IIR1_0_SEL: 00000000 (00000000 00000000 00000000 00000000)
AUD_IIR1_0_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_IIR1_1_SEL: 00000002 (00000000 00000000 00000000 00000010)
AUD_IIR1_1_SHIFT: 00000007 (00000000 00000000 00000000 00000111)
AUD_IIR1_2_SEL: 00000001 (00000000 00000000 00000000 00000001)
AUD_IIR1_2_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_IIR1_3_SEL: 00000004 (00000000 00000000 00000000 00000100)
AUD_IIR1_3_SHIFT: 00000007 (00000000 00000000 00000000 00000111)
AUD_IIR1_4_SEL: 00000021 (00000000 00000000 00000000 00100001)
AUD_IIR1_4_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_IIR1_5_SEL: 00000007 (00000000 00000000 00000000 00000111)
AUD_IIR1_5_SHIFT: 00000007 (00000000 00000000 00000000 00000111)
AUD_IIR2_0_SEL: 00000009 (00000000 00000000 00000000 00001001)
AUD_IIR2_0_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_IIR2_1_SEL: 0000001c (00000000 00000000 00000000 00011100)
AUD_IIR2_1_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_IIR2_2_SEL: 00000020 (00000000 00000000 00000000 00100000)
AUD_IIR2_2_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_IIR2_3_SEL: 0000001f (00000000 00000000 00000000 00011111)
AUD_IIR2_3_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_IIR3_0_SEL: 00000016 (00000000 00000000 00000000 00010110)
AUD_IIR3_0_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_IIR3_1_SEL: 00000018 (00000000 00000000 00000000 00011000)
AUD_IIR3_1_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_IIR3_2_SEL: 00000018 (00000000 00000000 00000000 00011000)
AUD_IIR3_2_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_IIR4_0_SEL: 0000000b (00000000 00000000 00000000 00001011)
AUD_IIR4_0_SHIFT: 00000006 (00000000 00000000 00000000 00000110)
AUD_IIR4_1_SEL: 0000000d (00000000 00000000 00000000 00001101)
AUD_IIR4_1_SHIFT: 00000006 (00000000 00000000 00000000 00000110)
AUD_IIR4_2_SEL: 0000000b (00000000 00000000 00000000 00001011)
AUD_IIR4_2_SHIFT: 00000006 (00000000 00000000 00000000 00000110)
AUD_IIR4_0_CA0: 00006349 (00000000 00000000 01100011 01001001)
AUD_IIR4_0_CA1: 00006f27 (00000000 00000000 01101111 00100111)
AUD_IIR4_0_CA2: 0000e7a3 (00000000 00000000 11100111 10100011)
AUD_IIR4_0_CB0: 00005653 (00000000 00000000 01010110 01010011)
AUD_IIR4_0_CB1: 0000cf97 (00000000 00000000 11001111 10010111)
AUD_IIR4_1_CA0: 00006349 (00000000 00000000 01100011 01001001)
AUD_IIR4_1_CA1: 00006f27 (00000000 00000000 01101111 00100111)
AUD_IIR4_1_CA2: 0000e7a3 (00000000 00000000 11100111 10100011)
AUD_IIR4_1_CB0: 00005653 (00000000 00000000 01010110 01010011)
AUD_IIR4_1_CB1: 0000cf97 (00000000 00000000 11001111 10010111)
AUD_IIR4_2_CA0: 00007834 (00000000 00000000 01111000 00110100)
AUD_IIR4_2_CA1: 00007b3d (00000000 00000000 01111011 00111101)
AUD_IIR4_2_CA2: 0000fabd (00000000 00000000 11111010 10111101)
AUD_IIR4_2_CB0: 000073ba (00000000 00000000 01110011 10111010)
AUD_IIR4_2_CB1: 0000f340 (00000000 00000000 11110011 01000000)
AUD_HP_MD_IIR4_1: 00000000 (00000000 00000000 00000000 00000000)
AUD_HP_PROG_IIR4_1: 00000000 (00000000 00000000 00000000 00000000)
AUD_FM_MODE_ENABLE: 00000000 (00000000 00000000 00000000 00000000)
AUD_POLY0_DDS_CONSTANT: 0012010c (00000000 00010010 00000001 00001100)
AUD_DN0_FREQ: 0000283b (00000000 00000000 00101000 00111011)
AUD_DN1_FREQ: 00004000 (00000000 00000000 01000000 00000000)
AUD_DN1_FREQ_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_DN1_AFC: 00000000 (00000000 00000000 00000000 00000000)
AUD_DN1_SRC_SEL: 00000009 (00000000 00000000 00000000 00001001)
AUD_DN1_SHFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_DN2_FREQ: 00003000 (00000000 00000000 00110000 00000000)
AUD_DN2_FREQ_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_DN2_AFC: 00000002 (00000000 00000000 00000000 00000010)
AUD_DN2_SRC_SEL: 00000008 (00000000 00000000 00000000 00001000)
AUD_DN2_SHFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_CRDC0_SRC_SEL: 000000c5 (00000000 00000000 00000000 11000101)
AUD_CRDC0_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_CORDIC_SHIFT_0: 00000006 (00000000 00000000 00000000 00000110)
AUD_CRDC1_SRC_SEL: 000003ce (00000000 00000000 00000011 11001110)
AUD_CRDC1_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_CORDIC_SHIFT_1: 00000007 (00000000 00000000 00000000 00000111)
AUD_DCOC_0_SRC: 0000001a (00000000 00000000 00000000 00011010)
AUD_DCOC0_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_DCOC_0_SHIFT_IN0: 0000000a (00000000 00000000 00000000 00001010)
AUD_DCOC_0_SHIFT_IN1: 00000008 (00000000 00000000 00000000 00001000)
AUD_DCOC_1_SRC: 0000001b (00000000 00000000 00000000 00011011)
AUD_DCOC1_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_DCOC_1_SHIFT_IN0: 0000000a (00000000 00000000 00000000 00001010)
AUD_DCOC_1_SHIFT_IN1: 00000008 (00000000 00000000 00000000 00001000)
AUD_DCOC_2_SRC: 0000001b (00000000 00000000 00000000 00011011)
AUD_DCOC2_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_DCOC_2_SHIFT_IN0: 00000006 (00000000 00000000 00000000 00000110)
AUD_DCOC_2_SHIFT_IN1: 00000008 (00000000 00000000 00000000 00001000)
AUD_DCOC_PASS_IN: 00000003 (00000000 00000000 00000000 00000011)
AUD_PDET_SRC: 00000019 (00000000 00000000 00000000 00011001)
AUD_PDET_SHIFT: 00000002 (00000000 00000000 00000000 00000010)
AUD_PILOT_BQD_1_K0: 00001525 (00000000 00000000 00010101 00100101)
AUD_PILOT_BQD_1_K1: 007f8d4f (00000000 01111111 10001101 01001111)
AUD_PILOT_BQD_1_K2: ff80dd2f (11111111 10000000 11011101 00101111)
AUD_PILOT_BQD_1_K3: ffc071de (11111111 11000000 01110001 11011110)
AUD_PILOT_BQD_1_K4: 00400000 (00000000 01000000 00000000 00000000)
AUD_PILOT_BQD_2_K0: 0000a3d7 (00000000 00000000 10100011 11010111)
AUD_PILOT_BQD_2_K1: 003f8dcd (00000000 00111111 10001101 11001101)
AUD_PILOT_BQD_2_K2: 00400000 (00000000 01000000 00000000 00000000)
AUD_PILOT_BQD_2_K3: 00000000 (00000000 00000000 00000000 00000000)
AUD_PILOT_BQD_2_K4: 00000000 (00000000 00000000 00000000 00000000)
AUD_THR_FR: 00000001 (00000000 00000000 00000000 00000001)
AUD_X_PROG: 00000008 (00000000 00000000 00000000 00001000)
AUD_Y_PROG: 02000000 (00000010 00000000 00000000 00000000)
AUD_HARMONIC_MULT: 00000002 (00000000 00000000 00000000 00000010)
AUD_C1_UP_THR: 00001111 (00000000 00000000 00010001 00010001)
AUD_C1_LO_THR: 00000f0f (00000000 00000000 00001111 00001111)
AUD_C2_UP_THR: 00000000 (00000000 00000000 00000000 00000000)
AUD_C2_LO_THR: 00000000 (00000000 00000000 00000000 00000000)
AUD_PLL_EN: 00000003 (00000000 00000000 00000000 00000011)
AUD_PLL_SRC: 00000019 (00000000 00000000 00000000 00011001)
AUD_PLL_SHIFT: 00000002 (00000000 00000000 00000000 00000010)
AUD_PLL_IF_SEL: 00000009 (00000000 00000000 00000000 00001001)
AUD_PLL_IF_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_BIQUAD_PLL_K0: 00008a68 (00000000 00000000 10001010 01101000)
AUD_BIQUAD_PLL_K1: 00092305 (00000000 00001001 00100011 00000101)
AUD_BIQUAD_PLL_K2: 00100000 (00000000 00010000 00000000 00000000)
AUD_BIQUAD_PLL_K3: 00fcb368 (00000000 11111100 10110011 01101000)
AUD_BIQUAD_PLL_K4: 00080000 (00000000 00001000 00000000 00000000)
AUD_DEEMPH0_SRC_SEL: 00000011 (00000000 00000000 00000000 00010001)
AUD_DEEMPH0_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_DEEMPH0_G0: 00001323 (00000000 00000000 00010011 00100011)
AUD_DEEMPH0_A0: 000067a0 (00000000 00000000 01100111 10100000)
AUD_DEEMPH0_B0: 00000e20 (00000000 00000000 00001110 00100000)
AUD_DEEMPH0_A1: 0003c280 (00000000 00000011 11000010 10000000)
AUD_DEEMPH0_B1: 00003d80 (00000000 00000000 00111101 10000000)
AUD_DEEMPH1_SRC_SEL: 00000013 (00000000 00000000 00000000 00010011)
AUD_DEEMPH1_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_DEEMPH1_G0: 00001323 (00000000 00000000 00010011 00100011)
AUD_DEEMPH1_A0: 000067a0 (00000000 00000000 01100111 10100000)
AUD_DEEMPH1_B0: 00000e20 (00000000 00000000 00001110 00100000)
AUD_DEEMPH1_A1: 0003c280 (00000000 00000011 11000010 10000000)
AUD_DEEMPH1_B1: 00003d80 (00000000 00000000 00111101 10000000)
AUD_OUT0_SEL: 0000003f (00000000 00000000 00000000 00111111)
AUD_OUT0_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_OUT1_SEL: 00000013 (00000000 00000000 00000000 00010011)
AUD_OUT1_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_RDSI_SEL: 00000007 (00000000 00000000 00000000 00000111)
AUD_RDSI_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_RDSQ_SEL: 00000007 (00000000 00000000 00000000 00000111)
AUD_RDSQ_SHIFT: 00000000 (00000000 00000000 00000000 00000000)
AUD_DBX_IN_GAIN: 00004734 (00000000 00000000 01000111 00110100)
AUD_DBX_WBE_GAIN: 00004640 (00000000 00000000 01000110 01000000)
AUD_DBX_SE_GAIN: 00008d31 (00000000 00000000 10001101 00110001)
AUD_DBX_RMS_WBE: 00000002 (00000000 00000000 00000000 00000010)
AUD_DBX_RMS_SE: 00000023 (00000000 00000000 00000000 00100011)
AUD_DBX_SE_BYPASS: 00000000 (00000000 00000000 00000000 00000000)
AUD_FAWDETCTL: 00000678 (00000000 00000000 00000110 01111000)
AUD_FAWDETWINCTL: 000012d6 (00000000 00000000 00010010 11010110)
AUD_DEEMPHGAIN_R: 00010000 (00000000 00000001 00000000 00000000)
AUD_DEEMPHNUMER1_R: 00000000 (00000000 00000000 00000000 00000000)
AUD_DEEMPHNUMER2_R: 00000000 (00000000 00000000 00000000 00000000)
AUD_DEEMPHDENOM1_R: 00000000 (00000000 00000000 00000000 00000000)
AUD_DEEMPHDENOM2_R: 00000000 (00000000 00000000 00000000 00000000)
AUD_ERRLOGPERIOD_R: 000003e8 (00000000 00000000 00000011 11101000)
AUD_ERRINTRPTTHSHLD1_R: 00000fff (00000000 00000000 00001111 11111111)
AUD_ERRINTRPTTHSHLD2_R: 00000fff (00000000 00000000 00001111 11111111)
AUD_ERRINTRPTTHSHLD3_R: 00000fff (00000000 00000000 00001111 11111111)
AUD_NICAM_STATUS1: 0000841f (00000000 00000000 10000100 00011111)
AUD_NICAM_STATUS2: 0000000d (00000000 00000000 00000000 00001101)
AUD_ERRLOG1: 00000000 (00000000 00000000 00000000 00000000)
AUD_ERRLOG2: 00000000 (00000000 00000000 00000000 00000000)
AUD_ERRLOG3: 00000000 (00000000 00000000 00000000 00000000)
AUD_DAC_BYPASS_L: 00000000 (00000000 00000000 00000000 00000000)
AUD_DAC_BYPASS_R: 00000000 (00000000 00000000 00000000 00000000)
AUD_DAC_BYPASS_CTL: 00000000 (00000000 00000000 00000000 00000000)
AUD_CTL: 00001203 (00000000 00000000 00010010 00000011)
AUD_STATUS: 0000fff2 (00000000 00000000 11111111 11110010)
AUD_VOL_CTL: 0000000f (00000000 00000000 00000000 00001111)
AUD_BAL_CTL: 00000000 (00000000 00000000 00000000 00000000)
AUD_START_TIMER: 00000000 (00000000 00000000 00000000 00000000)
AUD_MODE_CHG_TIMER: 000001b5 (00000000 00000000 00000001 10110101)
AUD_POLYPH80SCALEFAC: 00000003 (00000000 00000000 00000000 00000011)
AUD_DMD_RA_DDS: 00c33ef7 (00000000 11000011 00111110 11110111)
AUD_I2S_RA_DDS: 00400000 (00000000 01000000 00000000 00000000)
AUD_RATE_THRES_DMD: 000000b4 (00000000 00000000 00000000 10110100)
AUD_RATE_THRES_I2S: 00000005 (00000000 00000000 00000000 00000101)
AUD_RATE_ADJ1: 00000100 (00000000 00000000 00000001 00000000)
AUD_RATE_ADJ2: 00000200 (00000000 00000000 00000010 00000000)
AUD_RATE_ADJ3: 00000300 (00000000 00000000 00000011 00000000)
AUD_RATE_ADJ4: 00000400 (00000000 00000000 00000100 00000000)
AUD_RATE_ADJ5: 00000500 (00000000 00000000 00000101 00000000)
AUD_APB_IN_RATE_ADJ: 00000000 (00000000 00000000 00000000 00000000)
AUD_PHASE_FIX_CTL: 00000020 (00000000 00000000 00000000 00100000)
AUD_PLL_PRESCALE: 00000002 (00000000 00000000 00000000 00000010)
AUD_PLL_DDS: 00000000 (00000000 00000000 00000000 00000000)
AUD_PLL_INT: 0000001e (00000000 00000000 00000000 00011110)
AUD_PLL_FRAC: 0000e542 (00000000 00000000 11100101 01000010)
AUD_PLL_JTAG: 00000000 (00000000 00000000 00000000 00000000)
AUD_PLL_SPMP: 00000004 (00000000 00000000 00000000 00000100)
AUD_AFE_12DB_EN: 00000001 (00000000 00000000 00000000 00000001)
AUD_PDF_DDS_CNST_BYTE2: 48 (01001000)
AUD_PDF_DDS_CNST_BYTE1: 3d (00111101)
AUD_PDF_DDS_CNST_BYTE0: f5 (11110101)
AUD_QAM_MODE: 05 (00000101)
AUD_PHACC_FREQ_8MSB: 3a (00111010)
AUD_PHACC_FREQ_8LSB: 4a (01001010)
MO_GP0_IO: 000004fb (00000000 00000000 00000100 11111011)
MO_GP1_IO: 000000ff (00000000 00000000 00000000 11111111)
MO_GP2_IO: 00001ef3 (00000000 00000000 00011110 11110011)
MO_GP3_IO: 00000000 (00000000 00000000 00000000 00000000)
end of dump
And this is in the INF of the driver provided by the manufacturer:
HKR,"DriverData","TunerType",0x00010001, 0x1A, 0x00, 0x00, 0x00
HKR,"DriverData","TunerI2CAddress",0x00010001, 0xC2, 0x00, 0x00, 0x00
HKR,"DriverData","TunerResetGPIO",0x00010001, 0x0F,0x00,0x00,0x00
--- El sáb 16-ago-08, Carlos Limarino <climarino@yahoo.com.ar> escribió:
> De: Carlos Limarino <climarino@yahoo.com.ar>
> Asunto: Help needed to add support for the card Compro VideoMate X50 (CX88/XC2028)
> Para: video4linux-list@redhat.com
> Fecha: sábado, 16 de agosto de 2008, 10:54 pm
> Hi,
>
> I'm trying to add support for a CX23880 based card that
> uses the Xceive 2028 tuner. Support for this tuner was
> recently added to the kernel, I tried using similar cards
> already supported by the driver. The results were:
>
> using card=62 (PowerColor RA330)
>
> cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
> ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
> ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] ->
> GSI 17 (level, low) -> IRQ 17
> cx88[0]: subsystem: 185b:e000, board: PowerColor RA330
> [card=62,insmod option]
> cx88[0]: TV tuner type 71, Radio tuner type 0
> tuner' 2-0061: chip found @ 0xc2 (cx88[0])
> xc2028 2-0061: creating new instance
> xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
> cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw
> cx88 IR (PowerColor RA330): unknown key: key=0x3f raw=0x3f
> down=1
> cx88 IR (PowerColor RA330): unknown key: key=0x3f raw=0x3f
> down=0
> input: cx88 IR (PowerColor RA330) as
> /devices/pci0000:00/0000:00:10.0/0000:02:09.0/input/input6
> cx88[0]/0: found at 0000:02:09.0, rev: 5, irq: 17, latency:
> 32, mmio: 0xfc000000
> cx88[0]/0: registered device video0 [v4l2]
> cx88[0]/0: registered device vbi0
> cx88[0]/0: registered device radio0
> firmware: requesting xc3028-v27.fw
> xc2028 2-0061: Loading 80 firmware images from
> xc3028-v27.fw, type: xc2028 firmware, ver 2.7
> cx88[0]: Calling XC2028/3028 callback
> xc2028 2-0061: Loading firmware for type=BASE (1), id
> 0000000000000000.
> cx88[0]: Calling XC2028/3028 callback
> xc2028 2-0061: i2c output error: rc = -121 (should be 64)
> xc2028 2-0061: -121 returned from send
> xc2028 2-0061: Error -22 while loading base firmware
> cx88[0]: Calling XC2028/3028 callback
> xc2028 2-0061: Loading firmware for type=BASE (1), id
> 0000000000000000.
> cx88[0]: Calling XC2028/3028 callback
> xc2028 2-0061: i2c output error: rc = -121 (should be 64)
> xc2028 2-0061: -121 returned from send
> xc2028 2-0061: Error -22 while loading base firmware
> cx88[0]: Calling XC2028/3028 callback
> xc2028 2-0061: Loading firmware for type=BASE FM (401), id
> 0000000000000000.
> cx88[0]: Calling XC2028/3028 callback
> xc2028 2-0061: Loading firmware for type=FM (400), id
> 0000000000000000.
> cx88[0]: Calling XC2028/3028 callback
>
> using card=61 (Winfast TV2000 XP Global)
>
> cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
> ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] ->
> GSI 17 (level, low) -> IRQ 17
> cx88[0]: subsystem: 185b:e000, board: Winfast TV2000 XP
> Global [card=61,insmod option]
> cx88[0]: TV tuner type 71, Radio tuner type 0
> tuner' 2-0061: chip found @ 0xc2 (cx88[0])
> xc2028 2-0061: creating new instance
> xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
> cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw
> cx88[0]/0: found at 0000:02:09.0, rev: 5, irq: 17, latency:
> 32, mmio: 0xfc000000
> cx88[0]/0: registered device video0 [v4l2]
> cx88[0]/0: registered device vbi0
> cx88[0]/0: registered device radio0
> firmware: requesting xc3028-v27.fw
> xc2028 2-0061: Loading 80 firmware images from
> xc3028-v27.fw, type: xc2028 firmware, ver 2.7
> cx88[0]: Calling XC2028/3028 callback
> xc2028 2-0061: Loading firmware for type=BASE MTS (5), id
> 0000000000000000.
> cx88[0]: Calling XC2028/3028 callback
> i2c-adapter i2c-2: sendbytes: NAK bailout.
> xc2028 2-0061: i2c output error: rc = -5 (should be 64)
> xc2028 2-0061: -5 returned from send
> xc2028 2-0061: Error -22 while loading base firmware
> cx88[0]: Calling XC2028/3028 callback
> xc2028 2-0061: Loading firmware for type=BASE MTS (5), id
> 0000000000000000.
> cx88[0]: Calling XC2028/3028 callback
> i2c-adapter i2c-2: sendbytes: NAK bailout.
> xc2028 2-0061: i2c output error: rc = -5 (should be 64)
> xc2028 2-0061: -5 returned from send
> xc2028 2-0061: Error -22 while loading base firmware
> cx88[0]: Calling XC2028/3028 callback
> xc2028 2-0061: Loading firmware for type=BASE FM (401), id
> 0000000000000000.
> cx88[0]: Calling XC2028/3028 callback
> i2c-adapter i2c-2: sendbytes: NAK bailout.
> xc2028 2-0061: i2c output error: rc = -5 (should be 64)
> xc2028 2-0061: -5 returned from send
> xc2028 2-0061: Error -22 while loading base firmware
> cx88[0]: Calling XC2028/3028 callback
> xc2028 2-0061: Loading firmware for type=BASE FM (401), id
> 0000000000000000.
> cx88[0]: Calling XC2028/3028 callback
> i2c-adapter i2c-2: sendbytes: NAK bailout.
> xc2028 2-0061: i2c output error: rc = -5 (should be 64)
> xc2028 2-0061: -5 returned from send
> xc2028 2-0061: Error -22 while loading base firmware
>
> Developers of the CX18 driver found a similar problem with
> some cards, it seems that the pin that is used to reset the
> tuner changes from card to card:
>
> http://www.gossamer-threads.com/lists/ivtv/devel/38594
>
> Since I don't have much knowledge about driver
> programming, I can't find something similar to
> 'xceive_pin' to change & test. I would greatly
> appreciate any help with this.
>
> Thank you!
>
>
>
> Yahoo! Cocina
> Recetas prácticas y comida saludable
> http://ar.mujer.yahoo.com/cocina/
>
> --
> video4linux-list mailing list
> Unsubscribe
> mailto:video4linux-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list
Yahoo! Cocina
Recetas prácticas y comida saludable
http://ar.mujer.yahoo.com/cocina/
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
prev parent reply other threads:[~2008-08-17 17:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-17 1:54 Help needed to add support for the card Compro VideoMate X50 (CX88/XC2028) Carlos Limarino
2008-08-17 17:20 ` Carlos Limarino [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=413360.56066.qm@web34501.mail.mud.yahoo.com \
--to=climarino@yahoo.com.ar \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.