Libata - sata_sil - error

Libata - sata_sil - error

[Fabian Fenaut]

Hi,

I was writing to my sata drive, and I've just had this :

Sep 24 14:26:58 odie kernel: scsi1: ERROR on channel 0, id 0, lun 0, 
CDB: Read (10) 00 03 14 ca a7 00 00 08 00
Sep 24 14:26:58 odie kernel: Current sda: sense key Medium Error
Sep 24 14:26:58 odie kernel: Additional sense: Unrecovered read error - 
auto reallocate failed
Sep 24 14:26:58 odie kernel: end_request: I/O error, dev sda, sector 
51694247
Sep 24 14:26:58 odie kernel: ATA: abnormal status 0x58 on port 0xE080E087
Sep 24 14:26:58 odie last message repeated 2 times

uname -r = 2.6.7-mm7-ff

Drive : Vendor: ATA       Model: ST3120026AS       Rev: 3.05

Full dmesg : http://fabian.fenaut.free.fr/linux/dmesg-2.6.7-mm7-ff
.config : http://fabian.fenaut.free.fr/linux/config-2.6.7-mm7-ff

Since 7 sept, I had "EXT3-fs warning: mounting fs with errors, running
e2fsck is recommended" when mounting this drive. So I tried to fsck, but
it hangs and nothing happened.

Please help :)

Fabian

Re: Libata - sata_sil - error

[Alan Cox]

On Gwe, 2004-09-24 at 13:53, Fabian Fenaut wrote:
> Since 7 sept, I had "EXT3-fs warning: mounting fs with errors, running
> e2fsck is recommended" when mounting this drive. So I tried to fsck, but
> it hangs and nothing happened.

2.6.7 doesn't have code to generate proper SATA error diagnostic
reports. 2.6.9rc2 will dump the ATA error state which will reveal a lot
more.