[Bridge] problem, vlan and a bridge.

[Bridge] problem, vlan and a bridge.

[Fredrik Laestadius]

Hello world.

I'm new to this list so bare with me.

I have a procurve 2424m with 3 vlans configured.
I get the internet from another procurve that is connected to vlan1, and 
the bridge is connected between vlan1 and vlan2 (doing some filtering here)

So, internet > vlan1 > bridge > vlan2

The problem is that I get a packet loss between 30% and 70% and the logs 
on the bridge looks okay, same with the logs on the procurve.

The bridge works like a charm if I use another switch instead of vlan1.
like this: Internet > another switch > bridge > vlan2
Internet > vlan1 > bridge > another switch gives the same positive result.

The bridge is actually configured to serve as both a bridge between 2 
vlans and as a NAT-box for another vlan with workstations, dont think 
that is relevant to this problem though.
I used to use a router between those 2 vlans to filter, that also worked.

Any clues on where to even start looking? It might be a problem with the 
switch, but I might as well ask here.

Oh, and the vlans are all untagged, and there is no stp running on the 
switch.

Cheers, Fredrik Laestadius. .se