[LARTC] HTB 2.6.8 works 2.4.27 does not!

[LARTC] HTB 2.6.8 works 2.4.27 does not!

[Peter Huetmannsberger]

Hi again, sorry to be such a bother. 

I got my setup to work with kernel 2.6.8.1, however the two machines where 
I need to implement the shaping are running a 2.4.27 kernel. 

I have applied the infamous June patch (htbfair.diff) already, and 
recompiled the modules. And I am using the tc that comes with 
htb3.6-020525.tgz. While I can see the packets going into the right 
class, it does not seem to have any effect. I am using the same scripts on 
both the 2.6.8.1 and the 2.4.27 machines, and it seems that it does not 
work at all with 2.4.27. 

Any idea what else I could try?

Many thanks, 

.peter

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] HTB 2.6.8 works 2.4.27 does not!

[Peter Huetmannsberger]

Hi again, 

I have also changed the things suggested by Stef earlier on: 

- HTB hysteries 

- PSCHED_CPU 

- QLENGTH in sfq

Nothing seems to help. Kernel 2.4.27 distribution (RH9a)

Thanks, 

.peter

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] HTB 2.6.8 works 2.4.27 does not!

[gypsy]

Peter Huetmannsberger wrote:
> 
> Hi again,
> 
> I have also changed the things suggested by Stef earlier on:
> - HTB hysteries
> - PSCHED_CPU
> - QLENGTH in sfq
> 
> Nothing seems to help. Kernel 2.4.27 distribution (RH9a)

Are you SURE the correct modules are being loaded?
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/