Cross tool chain based on gcc-3.4.x

Cross tool chain based on gcc-3.4.x

[TheNop]

Hello,

I try to get a cross compiler based on
gcc-3.4.2
glibc-2.3.2
binutils-2.15
working;  without success.

Is anyone using a cross compiler base on  gcc-3.4.x for a mips big 
endian target?

Best regarts
TheNop

Re: Cross tool chain based on gcc-3.4.x

[Stephen P. Becker]

TheNop wrote:
> Hello,
> 
> I try to get a cross compiler based on
> gcc-3.4.2
> glibc-2.3.2
> binutils-2.15
> working;  without success.
> 
> Is anyone using a cross compiler base on  gcc-3.4.x for a mips big 
> endian target?
> 
> Best regarts
> TheNop
> 

I've got a very recent i686->mips-unknown-linux-gnu cross-toolchain 
available at:http://dev.gentoo.org/~geoman/mips-glibc-crosstools.tar.bz2 
if you are too frustrated with building your own.

It includes gcc-3.4.3, glibc-2.3.4 (20041102), and binutils 2.15.91.0.2.

Steve

Re: Cross tool chain based on gcc-3.4.x

[TheNop]

Stephen P. Becker wrote:

> TheNop wrote:
>
>> Hello,
>>
>> I try to get a cross compiler based on
>> gcc-3.4.2
>> glibc-2.3.2
>> binutils-2.15
>> working;  without success.
>>
>> Is anyone using a cross compiler base on  gcc-3.4.x for a mips big 
>> endian target?
>>
>> Best regarts
>> TheNop
>>
>
> I've got a very recent i686->mips-unknown-linux-gnu cross-toolchain 
> available 
> at:http://dev.gentoo.org/~geoman/mips-glibc-crosstools.tar.bz2 if you 
> are too frustrated with building your own.
>
> It includes gcc-3.4.3, glibc-2.3.4 (20041102), and binutils 2.15.91.0.2.
>
> Steve
>
>
Hi Steve,

thanx a lot.
This tool chain works perfectly for me. Now I can build 2.6.x kernel.
In the past I tried to build a cross tool chain using crosstools. I 
don`t get any combination of gcc-3.4.x/glibc-2.x.x working. Only the 
gcc-3.4.x-glibc-2.3.3 combination I could compile without errors, but I 
couldn't compile a 2.6.x kernel.

Could you please tell me, how you compile the tool chain?
It would be great, if you can provide me a script or a list of patches 
you applied for building.

Best regards
TheNop

Re: Cross tool chain based on gcc-3.4.x

[TheNop]

TheNop wrote:

> Stephen P. Becker wrote:
>
>> TheNop wrote:
>>
>>> Hello,
>>>
>>> I try to get a cross compiler based on
>>> gcc-3.4.2
>>> glibc-2.3.2
>>> binutils-2.15
>>> working;  without success.
>>>
>>> Is anyone using a cross compiler base on  gcc-3.4.x for a mips big 
>>> endian target?
>>>
>>> Best regarts
>>> TheNop
>>>
>>
>> I've got a very recent i686->mips-unknown-linux-gnu cross-toolchain 
>> available 
>> at:http://dev.gentoo.org/~geoman/mips-glibc-crosstools.tar.bz2 if you 
>> are too frustrated with building your own.
>>
>> It includes gcc-3.4.3, glibc-2.3.4 (20041102), and binutils 2.15.91.0.2.
>>
>> Steve
>>
>>
> Hi Steve,
>
> thanx a lot.
> This tool chain works perfectly for me. Now I can build 2.6.x kernel.
> In the past I tried to build a cross tool chain using crosstools. I 
> don`t get any combination of gcc-3.4.x/glibc-2.x.x working. Only the 
> gcc-3.4.x-glibc-2.3.3 combination I could compile without errors, but 
> I couldn't compile a 2.6.x kernel.
>
> Could you please tell me, how you compile the tool chain?
> It would be great, if you can provide me a script or a list of patches 
> you applied for building.
>
> Best regards
> TheNop
>
>
Hello,

sorry, typing error:
Only the gcc-3.4.x-glibc-2.3.2 combination I could compile without 
errors, but I couldn't compile a 2.6.x kernel.

Best regards
TheNop

Re: Cross tool chain based on gcc-3.4.x

[Stephen P. Becker]

TheNop wrote:
> Stephen P. Becker wrote:
> 
>> TheNop wrote:
>>
>>> Hello,
>>>
>>> I try to get a cross compiler based on
>>> gcc-3.4.2
>>> glibc-2.3.2
>>> binutils-2.15
>>> working;  without success.
>>>
>>> Is anyone using a cross compiler base on  gcc-3.4.x for a mips big 
>>> endian target?
>>>
>>> Best regarts
>>> TheNop
>>>
>>
>> I've got a very recent i686->mips-unknown-linux-gnu cross-toolchain 
>> available 
>> at:http://dev.gentoo.org/~geoman/mips-glibc-crosstools.tar.bz2 if you 
>> are too frustrated with building your own.
>>
>> It includes gcc-3.4.3, glibc-2.3.4 (20041102), and binutils 2.15.91.0.2.
>>
>> Steve
>>
>>
> Hi Steve,
> 
> thanx a lot.
> This tool chain works perfectly for me. Now I can build 2.6.x kernel.
> In the past I tried to build a cross tool chain using crosstools. I 
> don`t get any combination of gcc-3.4.x/glibc-2.x.x working. Only the 
> gcc-3.4.x-glibc-2.3.3 combination I could compile without errors, but I 
> couldn't compile a 2.6.x kernel.
> 
> Could you please tell me, how you compile the tool chain?
> It would be great, if you can provide me a script or a list of patches 
> you applied for building.
> 
> Best regards
> TheNop
> 
> 

Actually, if you just wanted to build kernels, you don't need glibc at 
all.  Just build binutils and then a bootstrap gcc compiler, and you are 
set.  The only reason I messed with a full toolchain at all is so that I 
can use c++ through distcc.

Steve

Re: Cross tool chain based on gcc-3.4.x

[TheNop]

Stephen P. Becker wrote:

> TheNop wrote:
>
>> Stephen P. Becker wrote:
>>
>>> TheNop wrote:
>>>
>>>> Hello,
>>>>
>>>> I try to get a cross compiler based on
>>>> gcc-3.4.2
>>>> glibc-2.3.2
>>>> binutils-2.15
>>>> working;  without success.
>>>>
>>>> Is anyone using a cross compiler base on  gcc-3.4.x for a mips big 
>>>> endian target?
>>>>
>>>> Best regarts
>>>> TheNop
>>>>
>>>
>>> I've got a very recent i686->mips-unknown-linux-gnu cross-toolchain 
>>> available 
>>> at:http://dev.gentoo.org/~geoman/mips-glibc-crosstools.tar.bz2 if 
>>> you are too frustrated with building your own.
>>>
>>> It includes gcc-3.4.3, glibc-2.3.4 (20041102), and binutils 
>>> 2.15.91.0.2.
>>>
>>> Steve
>>>
>>>
>> Hi Steve,
>>
>> thanx a lot.
>> This tool chain works perfectly for me. Now I can build 2.6.x kernel.
>> In the past I tried to build a cross tool chain using crosstools. I 
>> don`t get any combination of gcc-3.4.x/glibc-2.x.x working. Only the 
>> gcc-3.4.x-glibc-2.3.3 combination I could compile without errors, but 
>> I couldn't compile a 2.6.x kernel.
>>
>> Could you please tell me, how you compile the tool chain?
>> It would be great, if you can provide me a script or a list of 
>> patches you applied for building.
>>
>> Best regards
>> TheNop
>>
>>
>
> Actually, if you just wanted to build kernels, you don't need glibc at 
> all.  Just build binutils and then a bootstrap gcc compiler, and you 
> are set.  The only reason I messed with a full toolchain at all is so 
> that I can use c++ through distcc.
>
> Steve
>
>
Hi Steve,

I also want to build a root file system for the target.
I tried to build the tool chain you described above.
I used crossdev on gentoo: "crossdev --arch=mips --vbinutils=2.15.91.0.2 
--vheaders=2.4.25 --vgcc=3.4.3 --vglibc=2.3.4.20041102"
But it fails.

mips/mips-unknown-linux-gnu/sys-include -O2  -DIN_GCC -DCROSS_COMPILE   
-W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes 
-Wold-style-definition  -isystem ./include  -fPIC -DHAVE_SYSLOG -g  
-DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED  -D_LIBC_PROVIDES_SSP_ -I. -I. 
-I../../gcc -I../../gcc/. -I../../gcc/../include   -DL_eprintf -c 
../../gcc/libgcc2.c -o libgcc/./_eprintf.o
/var/tmp/portage/crossdevbuild/gcc-3.4.3/buildboothere-mips/gcc/xgcc 
-B/var/tmp/portage/crossdevbuild/gcc-3.4.3/buildboothere-mips/gcc/ 
-B/home/crossdev/mips/mips-unknown-linux-gnu/bin/ 
-B/home/crossdev/mips/mips-unknown-linux-gnu/lib/ -isystem 
/home/crossdev/mips/mips-unknown-linux-gnu/include -isystem 
/home/crossdev/mips/mips-unknown-linux-gnu/sys-include -O2  -DIN_GCC 
-DCROSS_COMPILE   -W -Wall -Wwrite-strings -Wstrict-prototypes 
-Wmissing-prototypes -Wold-style-definition  -isystem ./include  -fPIC 
-DHAVE_SYSLOG -g  -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED  
-D_LIBC_PROVIDES_SSP_ -I. -I. -I../../gcc -I../../gcc/. 
-I../../gcc/../include   -DL__gcc_bcmp -c ../../gcc/libgcc2.c -o 
libgcc/./__gcc_bcmp.o
../../gcc/unwind-dw2.c: In function `uw_frame_state_for':
../../gcc/unwind-dw2.c:1027: error: structure has no member named `sc_regs'
../../gcc/unwind-dw2.c:1027: error: structure has no member named `sc_pc'
make[2]: *** [libgcc/./unwind-dw2.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: Leaving directory 
`/var/tmp/portage/crossdevbuild/gcc-3.4.3/buildboothere-mips/gcc'
make[1]: *** [libgcc.a] Error 2
make[1]: Leaving directory 
`/var/tmp/portage/crossdevbuild/gcc-3.4.3/buildboothere-mips/gcc'
make: *** [all-gcc] Error 2

How did you build the tool chain?
What kernel headers did you use?
If I use kernel headers 2.6.8.1 (I realy need 2.6 heraders!)  the 
installation of the headers fails!

It would be great If you can tell me which paramerter I have to use with 
crossdev to get a working tool chain.

Best regards
TheNop

Re: Cross tool chain based on gcc-3.4.x

[Stephen P. Becker]

> Hi Steve,
> 
> I also want to build a root file system for the target.
> I tried to build the tool chain you described above.
> I used crossdev on gentoo: "crossdev --arch=mips --vbinutils=2.15.91.0.2 
> --vheaders=2.4.25 --vgcc=3.4.3 --vglibc=2.3.4.20041102"
> But it fails.
> 
> mips/mips-unknown-linux-gnu/sys-include -O2  -DIN_GCC -DCROSS_COMPILE   
> -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes 
> -Wold-style-definition  -isystem ./include  -fPIC -DHAVE_SYSLOG -g  
> -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED  -D_LIBC_PROVIDES_SSP_ -I. -I. 
> -I../../gcc -I../../gcc/. -I../../gcc/../include   -DL_eprintf -c 
> ../../gcc/libgcc2.c -o libgcc/./_eprintf.o
> /var/tmp/portage/crossdevbuild/gcc-3.4.3/buildboothere-mips/gcc/xgcc 
> -B/var/tmp/portage/crossdevbuild/gcc-3.4.3/buildboothere-mips/gcc/ 
> -B/home/crossdev/mips/mips-unknown-linux-gnu/bin/ 
> -B/home/crossdev/mips/mips-unknown-linux-gnu/lib/ -isystem 
> /home/crossdev/mips/mips-unknown-linux-gnu/include -isystem 
> /home/crossdev/mips/mips-unknown-linux-gnu/sys-include -O2  -DIN_GCC 
> -DCROSS_COMPILE   -W -Wall -Wwrite-strings -Wstrict-prototypes 
> -Wmissing-prototypes -Wold-style-definition  -isystem ./include  -fPIC 
> -DHAVE_SYSLOG -g  -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED  
> -D_LIBC_PROVIDES_SSP_ -I. -I. -I../../gcc -I../../gcc/. 
> -I../../gcc/../include   -DL__gcc_bcmp -c ../../gcc/libgcc2.c -o 
> libgcc/./__gcc_bcmp.o
> ../../gcc/unwind-dw2.c: In function `uw_frame_state_for':
> ../../gcc/unwind-dw2.c:1027: error: structure has no member named `sc_regs'
> ../../gcc/unwind-dw2.c:1027: error: structure has no member named `sc_pc'
> make[2]: *** [libgcc/./unwind-dw2.o] Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[2]: Leaving directory 
> `/var/tmp/portage/crossdevbuild/gcc-3.4.3/buildboothere-mips/gcc'
> make[1]: *** [libgcc.a] Error 2
> make[1]: Leaving directory 
> `/var/tmp/portage/crossdevbuild/gcc-3.4.3/buildboothere-mips/gcc'
> make: *** [all-gcc] Error 2
> 
> How did you build the tool chain?
> What kernel headers did you use?
> If I use kernel headers 2.6.8.1 (I realy need 2.6 heraders!)  the 
> installation of the headers fails!
> 
> It would be great If you can tell me which paramerter I have to use with 
> crossdev to get a working tool chain.
> 
> Best regards
> TheNop

Well, this really is more of a question for the gentoo-mips mailing 
list.  But anyway, 2.4 headers newer than our 2.4.22-r1 ebuild are 
broken (I can't remember exactly how at the moment), and we *really* 
don't support 2.6 headers at all.  In fact, building against them breaks 
glibc on o32 userland.  The only reason we have them in portage at all 
right now is for our n32 userland (which is broken in other ways because 
of the headers).  Eventually we'll have a sanitized 2.6 headers package 
that should work, but it may not be anytime soon.

Anyway to answer your question, I used crossdev to build a bootstrap C 
compiler (crossdev -k), then I did the rest by hand.  You might also 
need to get kumba's latest version of the crossdev script from gentoo's 
viewcvs under gentoo/users/kumba/crossdev/ just to get past the first part.

Why do you *need* 2.6 headers anyhow?  You can still run a 2.6 kernel 
with a userland compiled with 2.4 headers.

Steve

Re: Cross tool chain based on gcc-3.4.x

[TheNop]

Stephen P. Becker wrote:

>> Hi Steve,
>>
>> I also want to build a root file system for the target.
>> I tried to build the tool chain you described above.
>> I used crossdev on gentoo: "crossdev --arch=mips 
>> --vbinutils=2.15.91.0.2 --vheaders=2.4.25 --vgcc=3.4.3 
>> --vglibc=2.3.4.20041102"
>> But it fails.
>>
>> mips/mips-unknown-linux-gnu/sys-include -O2  -DIN_GCC 
>> -DCROSS_COMPILE   -W -Wall -Wwrite-strings -Wstrict-prototypes 
>> -Wmissing-prototypes -Wold-style-definition  -isystem ./include  
>> -fPIC -DHAVE_SYSLOG -g  -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED  
>> -D_LIBC_PROVIDES_SSP_ -I. -I. -I../../gcc -I../../gcc/. 
>> -I../../gcc/../include   -DL_eprintf -c ../../gcc/libgcc2.c -o 
>> libgcc/./_eprintf.o
>> /var/tmp/portage/crossdevbuild/gcc-3.4.3/buildboothere-mips/gcc/xgcc 
>> -B/var/tmp/portage/crossdevbuild/gcc-3.4.3/buildboothere-mips/gcc/ 
>> -B/home/crossdev/mips/mips-unknown-linux-gnu/bin/ 
>> -B/home/crossdev/mips/mips-unknown-linux-gnu/lib/ -isystem 
>> /home/crossdev/mips/mips-unknown-linux-gnu/include -isystem 
>> /home/crossdev/mips/mips-unknown-linux-gnu/sys-include -O2  -DIN_GCC 
>> -DCROSS_COMPILE   -W -Wall -Wwrite-strings -Wstrict-prototypes 
>> -Wmissing-prototypes -Wold-style-definition  -isystem ./include  
>> -fPIC -DHAVE_SYSLOG -g  -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED  
>> -D_LIBC_PROVIDES_SSP_ -I. -I. -I../../gcc -I../../gcc/. 
>> -I../../gcc/../include   -DL__gcc_bcmp -c ../../gcc/libgcc2.c -o 
>> libgcc/./__gcc_bcmp.o
>> ../../gcc/unwind-dw2.c: In function `uw_frame_state_for':
>> ../../gcc/unwind-dw2.c:1027: error: structure has no member named 
>> `sc_regs'
>> ../../gcc/unwind-dw2.c:1027: error: structure has no member named 
>> `sc_pc'
>> make[2]: *** [libgcc/./unwind-dw2.o] Error 1
>> make[2]: *** Waiting for unfinished jobs....
>> make[2]: Leaving directory 
>> `/var/tmp/portage/crossdevbuild/gcc-3.4.3/buildboothere-mips/gcc'
>> make[1]: *** [libgcc.a] Error 2
>> make[1]: Leaving directory 
>> `/var/tmp/portage/crossdevbuild/gcc-3.4.3/buildboothere-mips/gcc'
>> make: *** [all-gcc] Error 2
>>
>> How did you build the tool chain?
>> What kernel headers did you use?
>> If I use kernel headers 2.6.8.1 (I realy need 2.6 heraders!)  the 
>> installation of the headers fails!
>>
>> It would be great If you can tell me which paramerter I have to use 
>> with crossdev to get a working tool chain.
>>
>> Best regards
>> TheNop
>
>
> Well, this really is more of a question for the gentoo-mips mailing 
> list.  But anyway, 2.4 headers newer than our 2.4.22-r1 ebuild are 
> broken (I can't remember exactly how at the moment), and we *really* 
> don't support 2.6 headers at all.  In fact, building against them 
> breaks glibc on o32 userland.  The only reason we have them in portage 
> at all right now is for our n32 userland (which is broken in other 
> ways because of the headers).  Eventually we'll have a sanitized 2.6 
> headers package that should work, but it may not be anytime soon.
>
> Anyway to answer your question, I used crossdev to build a bootstrap C 
> compiler (crossdev -k), then I did the rest by hand.  You might also 
> need to get kumba's latest version of the crossdev script from 
> gentoo's viewcvs under gentoo/users/kumba/crossdev/ just to get past 
> the first part.
>
> Why do you *need* 2.6 headers anyhow?  You can still run a 2.6 kernel 
> with a userland compiled with 2.4 headers.
>
> Steve
>
>
Hi Steve,

I thought that I have to use 2.6 headers if I want to run a 2.6 kernel. 
If not, I'm happy with a working tool chain compiled with 2.4 headers :-).

Best regards
TheNop

Re: Cross tool chain based on gcc-3.4.x

[Thomas Petazzoni]

[-- Attachment #1: Type: text/plain, Size: 719 bytes --]

Hello,

TheNop a écrit :

> Is anyone using a cross compiler base on  gcc-3.4.x for a mips big 
> endian target?

Yes. Using buildroot (the tool provided by uclibc guys), I successfully 
generated tool chains for MIPS Big Endian with both Gcc 3.3.x et Gcc 
3.4.x. C and C++ programs, dynamically linked with uclibc work fine. 
However, with Gcc 3.4.x, my version of the Linux MIPS kernel (a more 
than one month old CVS checkout, heavily tuned for my platform) doesn't 
compile.

Thomas
-- 
PETAZZONI Thomas - thomas.petazzoni@enix.org
http://thomas.enix.org - Jabber: thomas.petazzoni@jabber.dk
KOS: http://kos.enix.org/ - Lolut: http://lolut.utbm.info
Fingerprint : 0BE1 4CF3 CEA4 AC9D CC6E  1624 F653 CB30 98D3 F7A7

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 254 bytes --]

Re: Cross tool chain based on gcc-3.4.x

[TheNop]

Thomas Petazzoni wrote:

> Hello,
>
> TheNop a écrit :
>
>> Is anyone using a cross compiler base on  gcc-3.4.x for a mips big 
>> endian target?
>
>
> Yes. Using buildroot (the tool provided by uclibc guys), I 
> successfully generated tool chains for MIPS Big Endian with both Gcc 
> 3.3.x et Gcc 3.4.x. C and C++ programs, dynamically linked with uclibc 
> work fine. However, with Gcc 3.4.x, my version of the Linux MIPS 
> kernel (a more than one month old CVS checkout, heavily tuned for my 
> platform) doesn't compile.
>
> Thomas

Hi Thomas,

I tried the current cvs version of toolchain provide by www.uclibc.org 
without success.
I will try buildroot tomorrow.
Hopefully I have luck than with crosstools.

Best regards
TheNop