[parisc-linux] 2.6.10-rc2-pa2 build failing

[parisc-linux] 2.6.10-rc2-pa2 build failing

[rray]

I got cvs.parisc-linux.org/download/linux-2.6/linux-2.6.10-rc2-pa2.tar.bz2
and attempted to compile it with standard options set.
It fails with

drivers/built-in.o: In function `sti_select_fbfont':
drivers/built-in.o(.init.text+0x2eb4): undefined reference to `find_font'
drivers/built-in.o(.init.text+0x2fd4): undefined reference to `get_default_font'
make: *** [.tmp_vmlinux1] Error 1

I'm building this on a K200.
Any suggestions?

Thanks
Richard Ray

_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

Re: [parisc-linux] 2.6.10-rc2-pa2 build failing

[Grant Grundler]

On Fri, Dec 03, 2004 at 03:55:54PM -0600, rray@tcmail.mstc.state.ms.us wrote:
> I got cvs.parisc-linux.org/download/linux-2.6/linux-2.6.10-rc2-pa2.tar.bz2
> and attempted to compile it with standard options set.

Sorry - I need a better definition of "standard" options.
Can you point at a specific .config file?
Perhaps one of those used by the autobuilder?

(See http://cvs.parisc-linux.org/download/linux-2.6/)

> It fails with
> 
> drivers/built-in.o: In function `sti_select_fbfont':
> drivers/built-in.o(.init.text+0x2eb4): undefined reference to `find_font'
> drivers/built-in.o(.init.text+0x2fd4): undefined reference to `get_default_font'
> make: *** [.tmp_vmlinux1] Error 1
> 
> I'm building this on a K200.
> Any suggestions?

I suspect a dependency is missing in the Kconfig file.
Can you enable CONFIG_VT and see if that fixes the problem?

See drivers/video/Makefile - it only builds drivers/video/console/fonts.c
if CONFIG_VT is enabled. Ergo CONFIG_FB_STI depends on CONFIG_VT
but that's not encoded in drivers/video/Kconfig:
config FB_STI
        tristate "HP STI frame buffer device support"
        depends on FB && PARISC
        default y
...

Hrm...Looking at drivers/video/console/Kconfig it seems
enabling CONFIG_FRAMEBUFFER_CONSOLE is also required.
Please verify that is also enabled.

hth,
grant
_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

Re: [parisc-linux] 2.6.10-rc2-pa2 build failing

[rray]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 3411 bytes --]

Enabling CONFIG_FRAMEBUFFER_CONSOLE fixed the problem.
I was able to to complete the build.
I've attached my .config

But I get a kernel panic when I boot.

ncr53c720-0: rev 0xf irq 35
ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential
scsi0 : ncr53c8xx-3.4.3f
elevator: using anticipatory as default io scheduler
  Vendor: Seagate  Model: ST39236LC          Rev: HP02
  Type:   Direct-Access                      ANSI SCSI revision: 03
 target0:0:5: Beginning Domain Validation
ncr53c720-0-<5,*>: asynchronous.
ncr53c720-0-<5,*>: wide asynchronous.
ncr53c720-0-<5,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
 target0:0:5: Ending Domain Validation
ncr53c720-0-<6,*>: asynchronous.
Backtrace:
 [<1031d594>] ncr53c8xx_intr+0x4c/0xbc
 [<10107ad8>] do_irq+0xbc/0x19c
 [<10107c48>] do_cpu_irq_mask+0x90/0xf0
 [<1010d068>] intr_return+0x0/0x24
 [<10113fc8>] machine_restart+0x0/0x2c
Kernel Fault: Code=26 regs=10ac4500 (Addr=00000114)

     YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001000000000000001110 Not tainted
r00-03  00000000 1049a810 1031c2b0 27e7f000
r04-07  00000000 00000000 27e7e000 00000000
r08-11  27e7e458 00000001 10508010 10489810
r12-15  000000f2 00000001 000000fd 000000f3
r16-19  10ac4100 00000002 f0000064 00000003
r20-23  00000001 00000000 f1800800 27e7e458
r24-27  ffffffff 00000006 27e7e000 10487010
r28-31  0000000e 105c2810 10ac4500 00000040
sr0-3   00000000 00000000 00000000 00000000
sr4-7   00000000 00000000 00000000 00000000

IASQ: 00000000 00000000 IAOQ: 1031c2b8 1031c2bc
 IIR: 68e50228    ISR: 00000000  IOR: 00000114
 CPU:        1   CR30: 10ac4000 CR31: f004f000
 ORIG_R28: 105bab7c
 IAOQ[0]: ncr_int_sir+0x414/0x80c
 IAOQ[1]: ncr_int_sir+0x418/0x80c
 RP(r2): ncr_int_sir+0x40c/0x80c
Kernel panic - not syncing: Kernel Fault

Thanks
Richard Ray


On Sat, 4 Dec 2004, Grant Grundler wrote:

> On Fri, Dec 03, 2004 at 03:55:54PM -0600, rray@tcmail.mstc.state.ms.us wrote:
> > I got cvs.parisc-linux.org/download/linux-2.6/linux-2.6.10-rc2-pa2.tar.bz2
> > and attempted to compile it with standard options set.
>
> Sorry - I need a better definition of "standard" options.
> Can you point at a specific .config file?
> Perhaps one of those used by the autobuilder?
>
> (See http://cvs.parisc-linux.org/download/linux-2.6/)
>
> > It fails with
> >
> > drivers/built-in.o: In function `sti_select_fbfont':
> > drivers/built-in.o(.init.text+0x2eb4): undefined reference to `find_font'
> > drivers/built-in.o(.init.text+0x2fd4): undefined reference to `get_default_font'
> > make: *** [.tmp_vmlinux1] Error 1
> >
> > I'm building this on a K200.
> > Any suggestions?
>
> I suspect a dependency is missing in the Kconfig file.
> Can you enable CONFIG_VT and see if that fixes the problem?
>
> See drivers/video/Makefile - it only builds drivers/video/console/fonts.c
> if CONFIG_VT is enabled. Ergo CONFIG_FB_STI depends on CONFIG_VT
> but that's not encoded in drivers/video/Kconfig:
> config FB_STI
>         tristate "HP STI frame buffer device support"
>         depends on FB && PARISC
>         default y
> ...
>
> Hrm...Looking at drivers/video/console/Kconfig it seems
> enabling CONFIG_FRAMEBUFFER_CONSOLE is also required.
> Please verify that is also enabled.
>
> hth,
> grant
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
>

[-- Attachment #2: Type: TEXT/PLAIN, Size: 19374 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc2-pa2
# Sun Dec  5 15:58:38 2004
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_PA7000=y
# CONFIG_PA7100LC is not set
# CONFIG_PA7200 is not set
# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
# CONFIG_64BIT is not set
CONFIG_SMP=y
CONFIG_HOTPLUG_CPU=y
# CONFIG_DISCONTIGMEM is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
CONFIG_NR_CPUS=32

#
# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
#
CONFIG_GSC=y
# CONFIG_HPPB is not set
CONFIG_IOMMU_CCIO=y
CONFIG_GSC_LASI=y
CONFIG_GSC_WAX=y
CONFIG_EISA=y
CONFIG_EISA_NAMES=y
CONFIG_ISA=y
CONFIG_PCI=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_GSC_DINO=y
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
CONFIG_SUPERIO=y
CONFIG_CHASSIS_LCD_LED=y
CONFIG_PDC_CHASSIS=y

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PC-card bridges
#

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=6144
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_IDEDISK is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=y
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=y
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
CONFIG_SCSI_AHA1740=y
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_GENERIC_NCR5380=y
CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
CONFIG_SCSI_GENERIC_NCR53C400=y
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_NCR53C406A=y
CONFIG_SCSI_LASI700=y
CONFIG_53C700_MEM_MAPPED=y
CONFIG_53C700_LE_ON_BE=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
CONFIG_SCSI_QLOGIC_FC=y
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
CONFIG_SCSI_DC390T=y
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_DEBUG=y

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_LASI_82596=y
CONFIG_HAPPYMEAL=y
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
CONFIG_NET_VENDOR_RACAL=y
# CONFIG_NI52 is not set
# CONFIG_NI65 is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
CONFIG_HP100=y
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_GSCPS2=y
CONFIG_HP_SDC=y
CONFIG_HIL_MLC=y
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_HIL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_STALDRV is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MUX is not set
CONFIG_PDC_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
# CONFIG_MDA_CONSOLE is not set
CONFIG_STI_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
# CONFIG_LOGO is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set

[-- Attachment #3: Type: text/plain, Size: 169 bytes --]

_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

Re: [parisc-linux] 2.6.10-rc2-pa2 build failing

[Grant Grundler]

On Mon, Dec 06, 2004 at 09:03:03AM -0600, rray@tcmail.mstc.state.ms.us wrote:
> Enabling CONFIG_FRAMEBUFFER_CONSOLE fixed the problem.

good.

> I was able to to complete the build.
> I've attached my .config
> 
> But I get a kernel panic when I boot.
...
> Backtrace:
>  [<1031d594>] ncr53c8xx_intr+0x4c/0xbc
>  [<10107ad8>] do_irq+0xbc/0x19c
>  [<10107c48>] do_cpu_irq_mask+0x90/0xf0
>  [<1010d068>] intr_return+0x0/0x24
>  [<10113fc8>] machine_restart+0x0/0x2c
> Kernel Fault: Code=26 regs=10ac4500 (Addr=00000114)

Can you remind me which platform you are booting this on?

> 
>      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
> PSW: 00000000000001000000000000001110 Not tainted
> r00-03  00000000 1049a810 1031c2b0 27e7f000
> r04-07  00000000 00000000 27e7e000 00000000
> r08-11  27e7e458 00000001 10508010 10489810
> r12-15  000000f2 00000001 000000fd 000000f3
> r16-19  10ac4100 00000002 f0000064 00000003
> r20-23  00000001 00000000 f1800800 27e7e458
> r24-27  ffffffff 00000006 27e7e000 10487010
> r28-31  0000000e 105c2810 10ac4500 00000040
> sr0-3   00000000 00000000 00000000 00000000
> sr4-7   00000000 00000000 00000000 00000000
> 
> IASQ: 00000000 00000000 IAOQ: 1031c2b8 1031c2bc
>  IIR: 68e50228    ISR: 00000000  IOR: 00000114
>  CPU:        1   CR30: 10ac4000 CR31: f004f000
>  ORIG_R28: 105bab7c
>  IAOQ[0]: ncr_int_sir+0x414/0x80c
>  IAOQ[1]: ncr_int_sir+0x418/0x80c
>  RP(r2): ncr_int_sir+0x40c/0x80c

This is clearly a driver bug. I have no clue about
that particular driver though and can't look at it now.
I hope someone else can.

thanks for the report,
grant
_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

Re: [parisc-linux] 2.6.10-rc2-pa2 build failing

[Grant Grundler]

On Sat, Dec 11, 2004 at 12:06:45PM +0000, Joel Soete wrote:
> (iirc you can also safely get rid of pci stuff on your k )

He can but might need it for card-mode Dino 100BT cards.
BTW,I have 2 dual port 100BT HSC cards if anyone wants them.

grant
_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

Re: [parisc-linux] 2.6.10-rc2-pa2 build failing

[Matthew Wilcox]

On Sat, Dec 11, 2004 at 12:06:45PM +0000, Joel Soete wrote:
> >A K200 iirc?
> 
> Sorry for auto-reply but I go back to your previous mail and compare your 
> config file with mine and noticed some details:
> 
> 1) may be you need hppb bus option ON; the diff shows me:
> --- k200-hp-debian-1_config	2004-12-11 12:38:46.307780990 +0100
> +++ config-2.6.10-rc3-pa5	2004-12-11 12:36:59.434552100 +0100
> [...]
> -# CONFIG_HPPB is not set
> +CONFIG_HPPB=y

Shouldn't make any difference; the ncr720 is on the GSC bus.
http://www.openpa.net/systems/hawk.html shows the K class does have HPPB
slots, so I would suggest that you both have the HPPB option set wrongly;
there is no HPPB on the C class workstations, but there is for K class.

-- 
"Next the statesmen will invent cheap lies, putting the blame upon 
the nation that is attacked, and every man will be glad of those
conscience-soothing falsities, and will diligently study them, and refuse
to examine any refutations of them; and thus he will by and by convince 
himself that the war is just, and will thank God for the better sleep 
he enjoys after this process of grotesque self-deception." -- Mark Twain
_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

Re: [parisc-linux] 2.6.10-rc2-pa2 build failing

[Joel Soete]

Hi all,

I just experiment the same pb on my c110:
EXT3-fs: mounted filesystem with ordered data mode.
Disabled Privacy Extensions on device 103ab688(lo)
eth0: link ok.
Backtrace:
  [<10262e70>] ncr_reset_bus+0x50/0x110
  [<10267094>] ncr53c8xx_bus_reset+0x30/0x7c
  [<1025988c>] scsi_try_bus_reset+0x5c/0xd0
  [<10259a3c>] scsi_eh_bus_reset+0x6c/0x118
  [<1025a02c>] scsi_eh_ready_devs+0x64/0x9c
  [<1025a1a8>] scsi_unjam_host+0x7c/0xc0
  [<1025a2a4>] scsi_error_handler+0xb8/0x100
  [<1010bc5c>] ret_from_kernel_thread+0x1c/0x24
High Priority Machine Check (HPMC): Code=1 regs=1038e080 (Addr=00000000)

      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001101111001100001110 Not tainted
r00-03  00000000 103ac010 10262b44 0000000f
r04-07  2ff3c000 00000000 00000002 103ac010
r08-11  00000000 2ff38110 b5a95f80 1044bb00
r12-15  2fe7d278 00000000 1039d010 1044b810
r16-19  f00010f4 f00000ac f00000a4 f3f8c80e
r20-23  00000001 0000000f 0000000e 00000031
r24-27  00000002 f3f8c800 38200002 1038b010
r28-31  00002003 7b958900 2ff38380 1025988c
sr0-3   00000000 00000000 00000000 00000003
sr4-7   00000000 00000000 00000000 00000000

IASQ: 00000000 00000000 IAOQ: 10262c80 10262c84
  IIR: 37340018    ISR: 00000000  IOR: f3f8c80c
  CPU:        0   CR30: 2ff38000 CR31: 103e4000
  ORIG_R28: 00000000
  IAOQ[0]: ncr_reset_scsi_bus+0x190/0x2f8
  IAOQ[1]: ncr_reset_scsi_bus+0x194/0x2f8
  RP(r2): ncr_reset_scsi_bus+0x54/0x2f8
Kernel panic - not syncing: High Priority Machine Check (HPMC)
  <0>Rebooting in 120 seconds..

with:
# uname -a
Linux hpalin 2.6.10-rc3-pa8-c110 #2 Sat Dec 18 19:00:49 CET 2004 parisc GNU/Linx

fwiw: this same kernel was booting fine yesterday evening and as well after this panic???

Any idea?

Joel

Matthew Wilcox wrote:
> On Sat, Dec 11, 2004 at 12:06:45PM +0000, Joel Soete wrote:
> 
>>>A K200 iirc?
>>
>>Sorry for auto-reply but I go back to your previous mail and compare your 
>>config file with mine and noticed some details:
>>
>>1) may be you need hppb bus option ON; the diff shows me:
>>--- k200-hp-debian-1_config	2004-12-11 12:38:46.307780990 +0100
>>+++ config-2.6.10-rc3-pa5	2004-12-11 12:36:59.434552100 +0100
>>[...]
>>-# CONFIG_HPPB is not set
>>+CONFIG_HPPB=y
> 
> 
> Shouldn't make any difference; the ncr720 is on the GSC bus.
> http://www.openpa.net/systems/hawk.html shows the K class does have HPPB
> slots, so I would suggest that you both have the HPPB option set wrongly;
> there is no HPPB on the C class workstations, but there is for K class.
> 
_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

Re: [parisc-linux] 2.6.10-rc2-pa2 build failing

[Kyle McMartin]

On Fri, Dec 03, 2004 at 03:55:54PM -0600, rray@tcmail.mstc.state.ms.us wrote:
> I got cvs.parisc-linux.org/download/linux-2.6/linux-2.6.10-rc2-pa2.tar.bz2
> and attempted to compile it with standard options set.

Er, can you post the .config you used?

I just build that kernel with defconfig, and it linked fine.

Cheers,
	Kyle
_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux