Re: [LARTC] wonder shaper and vsftp

Re: [LARTC] wonder shaper and vsftp

[Andy Furniss]

Kinchan wrote:
> I have a linux server connecto into a 100mps LAN, i
> use iptables implementation of shorewall
> (shorewall.net) and then I used the wondershaper.
> 
> When I adjusted the values below, I got a download
> speed for vsftp at a whooping 1187.91 KB/s but a
> upload speed is only a painful 27 KB/s.
> 
> I dont fully understand the underpinng codes behind
> the wondershaper htb stuff. can someone guide me on
> how can i increase my ftp upload speed? 
> 
> Note: when i disble the firewall, i get a very slow
> download and upload speed at around 20 KB/s or slower.
> When I try to enable the firewall and then disable the
> traffic shaping, I also got a slow download and
> upload, so I guess the wonder shaper is really doing
> its job.

Are these slow speeds when you do both at once or testing up/down 
seperately? (what do you get with just upload and everything off)

Andy.

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

[LARTC] wonder shaper and vsftp

[Kinchan]

I have a linux server connecto into a 100mps LAN, i
use iptables implementation of shorewall
(shorewall.net) and then I used the wondershaper.

When I adjusted the values below, I got a download
speed for vsftp at a whooping 1187.91 KB/s but a
upload speed is only a painful 27 KB/s.

I dont fully understand the underpinng codes behind
the wondershaper htb stuff. can someone guide me on
how can i increase my ftp upload speed? 

Note: when i disble the firewall, i get a very slow
download and upload speed at around 20 KB/s or slower.
When I try to enable the firewall and then disable the
traffic shaping, I also got a slow download and
upload, so I guess the wonder shaper is really doing
its job.

here's a snip from my wonder shaper file
#!/bin/bash
# Wonder Shaper
# please read the README before filling out these
values 
#
# Set the following values to somewhat less than your
actual download
# and uplink speed. In kilobits. Also set the device
that is to be shaped.

DOWNLINKÅ92
UPLINKÅ92
DEV=eth0

Happy holidays to all. Thanks in advance

xorprime

==Kinchan Cepillo
a.k.a xorprime

Pain is temporary. Pride is forever


		
__________________________________ 
Do you Yahoo!? 
Meet the all-new My Yahoo! - Try it today! 
http://my.yahoo.com 
 

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/