* NAT + Firewall
@ 2005-01-01 6:39 edwardspl
2005-01-02 5:56 ` John A. Sullivan III
0 siblings, 1 reply; 4+ messages in thread
From: edwardspl @ 2005-01-01 6:39 UTC (permalink / raw)
To: netfilter
Dear All,
Happy New Year !
I want to know how to set the nat and firewall, then all of the client
PCs needn't to via ( throught ) leased line / broadband again, means
direct to internal network to connect with Internet Server ?
Many thank for your help !
Edward.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: NAT + Firewall
2005-01-01 6:39 NAT + Firewall edwardspl
@ 2005-01-02 5:56 ` John A. Sullivan III
2005-01-02 7:14 ` edwardspl
0 siblings, 1 reply; 4+ messages in thread
From: John A. Sullivan III @ 2005-01-02 5:56 UTC (permalink / raw)
To: edwardspl; +Cc: Netfilter users list
On Sat, 2005-01-01 at 14:39 +0800, edwardspl@ita.org.mo wrote:
> Dear All,
>
> Happy New Year !
>
> I want to know how to set the nat and firewall, then all of the client
> PCs needn't to via ( throught ) leased line / broadband again, means
> direct to internal network to connect with Internet Server ?
>
> Many thank for your help !
>
> Edward.
>
>
>
I would suggest that you read Oskar Andreasson's excellent tutorial on
using iptables. You can find it in the tutorials section of the
netfilter web page (http://www.netfilter.org). There are also some
slide shows available in the training section at
http://iscs.sourceforge.net
You could also use a GUI configuration like fwbuilder
(http://www.fwbuilder.org) to make this easier. When ISCS is ready, it
will automatically configure even the most complex NAT such as nested,
overlapping and range NAT. Good luck in your studies - John
--
John A. Sullivan III
Open Source Development Corporation
+1 207-985-7880
jsullivan@opensourcedevel.com
Financially sustainable open source development
http://www.opensourcedevel.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: NAT + Firewall
2005-01-02 5:56 ` John A. Sullivan III
@ 2005-01-02 7:14 ` edwardspl
2005-01-02 13:09 ` John A. Sullivan III
0 siblings, 1 reply; 4+ messages in thread
From: edwardspl @ 2005-01-02 7:14 UTC (permalink / raw)
To: John A. Sullivan III; +Cc: Netfilter users list
Dear John,
Is there some of samples for user to study ?
Thanks!
Edward.
"John A. Sullivan III" wrote:
> On Sat, 2005-01-01 at 14:39 +0800, edwardspl@ita.org.mo wrote:
> > Dear All,
> >
> > Happy New Year !
> >
> > I want to know how to set the nat and firewall, then all of the client
> > PCs needn't to via ( throught ) leased line / broadband again, means
> > direct to internal network to connect with Internet Server ?
> >
> > Many thank for your help !
> >
> > Edward.
> >
> >
> >
> I would suggest that you read Oskar Andreasson's excellent tutorial on
> using iptables. You can find it in the tutorials section of the
> netfilter web page (http://www.netfilter.org). There are also some
> slide shows available in the training section at
> http://iscs.sourceforge.net
> You could also use a GUI configuration like fwbuilder
> (http://www.fwbuilder.org) to make this easier. When ISCS is ready, it
> will automatically configure even the most complex NAT such as nested,
> overlapping and range NAT. Good luck in your studies - John
> --
> John A. Sullivan III
> Open Source Development Corporation
> +1 207-985-7880
> jsullivan@opensourcedevel.com
>
> Financially sustainable open source development
> http://www.opensourcedevel.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: NAT + Firewall
2005-01-02 7:14 ` edwardspl
@ 2005-01-02 13:09 ` John A. Sullivan III
0 siblings, 0 replies; 4+ messages in thread
From: John A. Sullivan III @ 2005-01-02 13:09 UTC (permalink / raw)
To: edwardspl; +Cc: Netfilter users list
Yes, there are plenty at both referenced sites.
On Sun, 2005-01-02 at 15:14 +0800, edwardspl@ita.org.mo wrote:
> Dear John,
>
> Is there some of samples for user to study ?
>
> Thanks!
>
> Edward.
>
> "John A. Sullivan III" wrote:
>
> > On Sat, 2005-01-01 at 14:39 +0800, edwardspl@ita.org.mo wrote:
> > > Dear All,
> > >
> > > Happy New Year !
> > >
> > > I want to know how to set the nat and firewall, then all of the client
> > > PCs needn't to via ( throught ) leased line / broadband again, means
> > > direct to internal network to connect with Internet Server ?
> > >
> > > Many thank for your help !
> > >
> > > Edward.
> > >
> > >
> > >
> > I would suggest that you read Oskar Andreasson's excellent tutorial on
> > using iptables. You can find it in the tutorials section of the
> > netfilter web page (http://www.netfilter.org). There are also some
> > slide shows available in the training section at
> > http://iscs.sourceforge.net
> > You could also use a GUI configuration like fwbuilder
> > (http://www.fwbuilder.org) to make this easier. When ISCS is ready, it
> > will automatically configure even the most complex NAT such as nested,
> > overlapping and range NAT. Good luck in your studies - John
> > --
> > John A. Sullivan III
> > Open Source Development Corporation
> > +1 207-985-7880
> > jsullivan@opensourcedevel.com
> >
> > Financially sustainable open source development
> > http://www.opensourcedevel.com
>
>
>
--
John A. Sullivan III
Open Source Development Corporation
+1 207-985-7880
jsullivan@opensourcedevel.com
Financially sustainable open source development
http://www.opensourcedevel.com
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2005-01-02 13:09 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-01 6:39 NAT + Firewall edwardspl
2005-01-02 5:56 ` John A. Sullivan III
2005-01-02 7:14 ` edwardspl
2005-01-02 13:09 ` John A. Sullivan III
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.