From: Hinko Kocevar <hinko@iskramedical.si>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] BDI2000 with pxa255
Date: Thu, 20 Jan 2005 15:50:39 +0100 [thread overview]
Message-ID: <41EFC53F.9010304@iskramedical.si> (raw)
Hi,
I've connected bdi2000 to the host computer and successfully updated
firmware and managed to telnet to the bdi. I also adapted cfg file for
my platform (KK trizeps2). When I power up the target device I get this
error:
...
- TARGET: target will be restarted in 10 sec
- TARGET: processing reset request
- TARGET: BDI asserts RESET and TRST
- TARGET: BDI removed TRST
- TARGET: Bypass check: 0x000000001 => 0x00000000
- TARGET: JTAG exists check failed
# TARGET: resetting target failed
# JTAG: communication with target failed
- TARGET: target will be restarted in 10 sec
...
Can somebody point me to the possible causes for this behaviour?
PS. Is it mandatory to supply ~RESET pin to BDI? Can I just keep it in
reset with a jumper closed? Trizeps2 is lacking this pin on JTAG connector.
best regards,
hk
--
hinko <dot> kocevar <at> iskramedical <dot> si
Hinko Kocevar, embedded systems developer
Iskra Medical d.o.o., Stegne 23, 1k LJ, SLO-EU
"A? r?n" | [Analects XII:22]
next reply other threads:[~2005-01-20 14:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-20 14:50 Hinko Kocevar [this message]
2005-01-20 15:15 ` [U-Boot-Users] BDI2000 with pxa255 Matej Kupljen
2005-01-24 15:46 ` Hinko Kocevar
-- strict thread matches above, loose matches on Subject: below --
2005-01-20 15:16 Paugam Luc
2005-01-24 15:49 ` Hinko Kocevar
2005-01-26 9:49 Paugam Luc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41EFC53F.9010304@iskramedical.si \
--to=hinko@iskramedical.si \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.