From: Hinko Kocevar <hinko@iskramedical.si>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] BDI2000 with pxa255
Date: Mon, 24 Jan 2005 16:49:00 +0100 [thread overview]
Message-ID: <41F518EC.60307@iskramedical.si> (raw)
In-Reply-To: <1CFEB358338412458B21FAA0D78FE86D017B0B39@rennsmail02.eu.thmulti.com>
Paugam Luc wrote:
> Hi,
>
> There is a problem with your JTAG link or chain.
> The important line is:
> - TARGET: Bypass check: 0x000000001 => 0x00000000
> It says roughly: (as you know, a JTAG chain is let say "a serial link looped") After setting all JTAG controllers into the JTAG chain to bypass mode, I sent a 1 (only 1 bit) and tried to get back this bit ... but in your case without success!
>
So, this could mean that other (TDI,TDO) JTAG lines do not operate
properly - or is this consequently because target was not reseted properly?
regards,
hk
--
hinko <dot> kocevar <at> iskramedical <dot> si
Hinko Kocevar, embedded systems developer
Iskra Medical d.o.o., Stegne 23, 1k LJ, SLO-EU
"A? r?n" | [Analects XII:22]
next prev parent reply other threads:[~2005-01-24 15:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-20 15:16 [U-Boot-Users] BDI2000 with pxa255 Paugam Luc
2005-01-24 15:49 ` Hinko Kocevar [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-01-26 9:49 Paugam Luc
2005-01-20 14:50 Hinko Kocevar
2005-01-20 15:15 ` Matej Kupljen
2005-01-24 15:46 ` Hinko Kocevar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41F518EC.60307@iskramedical.si \
--to=hinko@iskramedical.si \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.